Package: src:linux
Version: 3.16.7-ckt20-1+deb8u3
Severity: normal
Under NFS, when an executable has been regenerated on a different machine,
execve() gives me an EEXIST error. To reproduce the bug:
francine:~> touch bin/tst
francine:~> cat bin/tst
cassis:~> cat tst.c
int main (void)
{ return 0; }
cassis:~> gcc -O3 tst.c -o tst
cassis:~> mv tst bin/
mv: overwrite ‘bin/tst’? y
At this point, I have to wait for 15 seconds for the "mv" to be
done: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=799838
After that:
francine:~> strace -f -o tst.out sh -c "exec $HOME/bin/tst"
sh: 1: exec: /home/vlefevre/bin/tst: File exists
zsh: exit 2 strace -f -o tst.out sh -c "exec $HOME/bin/tst"
francine:~[2]> cat tst.out
21573 execve("/bin/sh", ["sh", "-c", "exec /home/vlefevre/bin/tst"], [/* 120
vars */]) = 0
21573 brk(0) = 0x7f4aded7d000
21573 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
21573 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f4aded46000
21573 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
21573 open("/home/vlefevre/debian8/gmp/westmere/lib/tls/x86_64/libc.so.6",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
21573 stat("/home/vlefevre/debian8/gmp/westmere/lib/tls/x86_64",
0x7ffec78d5b00) = -1 ENOENT (No such file or directory)
21573 open("/home/vlefevre/debian8/gmp/westmere/lib/tls/libc.so.6",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
21573 stat("/home/vlefevre/debian8/gmp/westmere/lib/tls", 0x7ffec78d5b00) = -1
ENOENT (No such file or directory)
21573 open("/home/vlefevre/debian8/gmp/westmere/lib/x86_64/libc.so.6",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
21573 stat("/home/vlefevre/debian8/gmp/westmere/lib/x86_64", 0x7ffec78d5b00) =
-1 ENOENT (No such file or directory)
21573 open("/home/vlefevre/debian8/gmp/westmere/lib/libc.so.6",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
21573 stat("/home/vlefevre/debian8/gmp/westmere/lib", {st_mode=S_IFDIR|0755,
st_size=13, ...}) = 0
21573 open("/usr/local/lib/tls/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1
ENOENT (No such file or directory)
21573 stat("/usr/local/lib/tls/x86_64", 0x7ffec78d5b00) = -1 ENOENT (No such
file or directory)
21573 open("/usr/local/lib/tls/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
21573 stat("/usr/local/lib/tls", 0x7ffec78d5b00) = -1 ENOENT (No such file or
directory)
21573 open("/usr/local/lib/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT
(No such file or directory)
21573 stat("/usr/local/lib/x86_64", 0x7ffec78d5b00) = -1 ENOENT (No such file
or directory)
21573 open("/usr/local/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
21573 stat("/usr/local/lib", {st_mode=S_IFDIR|S_ISGID|0775, st_size=4096, ...})
= 0
21573 open("/lib64/tls/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
21573 stat("/lib64/tls/x86_64", 0x7ffec78d5b00) = -1 ENOENT (No such file or
directory)
21573 open("/lib64/tls/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
21573 stat("/lib64/tls", 0x7ffec78d5b00) = -1 ENOENT (No such file or directory)
21573 open("/lib64/x86_64/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
21573 stat("/lib64/x86_64", 0x7ffec78d5b00) = -1 ENOENT (No such file or
directory)
21573 open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
21573 read(3,
"\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\34\2\0\0\0\0\0"..., 832) = 832
21573 fstat(3, {st_mode=S_IFREG|0755, st_size=1738176, ...}) = 0
21573 mmap(NULL, 3844640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0x7f4ade55f000
21573 mprotect(0x7f4ade701000, 2093056, PROT_NONE) = 0
21573 mmap(0x7f4ade900000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1a1000) = 0x7f4ade900000
21573 mmap(0x7f4ade906000, 14880, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f4ade906000
21573 close(3) = 0
21573 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f4aded45000
21573 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f4aded44000
21573 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
= 0x7f4aded43000
21573 arch_prctl(ARCH_SET_FS, 0x7f4aded44700) = 0
21573 mprotect(0x7f4ade900000, 16384, PROT_READ) = 0
21573 mprotect(0x7f4aded48000, 12288, PROT_READ) = 0
21573 mprotect(0x7f4adeb2a000, 4096, PROT_READ) = 0
21573 getpid() = 21573
21573 rt_sigaction(SIGCHLD, {0x7f4adeb3efd0, ~[RTMIN RT_1], SA_RESTORER,
0x7f4ade5940e0}, NULL, 8) = 0
21573 geteuid() = 1114
21573 brk(0) = 0x7f4aded7d000
21573 brk(0x7f4aded9e000) = 0x7f4aded9e000
21573 getppid() = 21568
21573 stat("/home/vlefevre", {st_mode=S_IFDIR|0751, st_size=328, ...}) = 0
21573 stat(".", {st_mode=S_IFDIR|0751, st_size=328, ...}) = 0
21573 rt_sigaction(SIGINT, NULL, {SIG_DFL, [], 0}, 8) = 0
21573 rt_sigaction(SIGINT, {0x7f4adeb3efd0, ~[RTMIN RT_1], SA_RESTORER,
0x7f4ade5940e0}, NULL, 8) = 0
21573 rt_sigaction(SIGQUIT, NULL, {SIG_DFL, [], 0}, 8) = 0
21573 rt_sigaction(SIGQUIT, {SIG_DFL, ~[RTMIN RT_1], SA_RESTORER,
0x7f4ade5940e0}, NULL, 8) = 0
21573 rt_sigaction(SIGTERM, NULL, {SIG_DFL, [], 0}, 8) = 0
21573 rt_sigaction(SIGTERM, {SIG_DFL, ~[RTMIN RT_1], SA_RESTORER,
0x7f4ade5940e0}, NULL, 8) = 0
21573 execve("/home/vlefevre/bin/tst", ["/home/vlefevre/bin/tst"], [/* 120 vars
*/]) = -1 EEXIST (File exists)
21573 write(2, "sh: 1: exec: ", 13) = 13
21573 write(2, "/home/vlefevre/bin/tst: File exi"..., 35) = 35
21573 write(2, "\n", 1) = 1
21573 exit_group(2) = ?
21573 +++ exited with 2 +++
According to the execve(2), this EEXIST error is not possible.
Actually, it doesn't even make sense here since the file needs
to exist.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version
4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt20-1+deb8u3 (2016-01-17)
** Command line:
root=/dev/nfs initrd=nfs/jessie/initrd.img-aufs aufs=/dev/sda1
nfsroot=140.77.14.15:/target_jessie ip=:::::eth0:dhcp rw
** Tainted: CI (3072)
* Module from drivers/staging has been loaded.
* Working around severe firmware bug.
** Kernel log:
[ 9.091970] systemd[1]: Started Device-mapper event daemon.
[ 9.092442] systemd[1]: Mounting Huge Pages File System...
[ 9.094376] systemd[1]: Starting Create list of required static device nodes
for the current kernel...
[ 9.095378] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.096294] systemd[1]: Starting udev Coldplug all Devices...
[ 9.097277] systemd[1]: Mounting Debug File System...
[ 9.098212] systemd[1]: Starting Slices.
[ 9.098646] systemd[1]: Reached target Slices.
[ 9.098740] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 9.099324] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.099423] systemd[1]: Expecting device dev-VGsystem-LVlocal.device...
[ 9.100654] systemd[1]: Started Collect Read-Ahead Data.
[ 9.104812] systemd[1]: Started Create list of required static device nodes
for the current kernel.
[ 9.107989] systemd[1]: Started Replay Read-Ahead Data.
[ 9.112482] systemd[1]: Started Set Up Additional Binary Formats.
[ 9.112706] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 9.117442] systemd[1]: Starting Load Kernel Modules...
[ 9.130100] lp: driver loaded but no devices found
[ 9.134692] random: nonblocking pool is initialized
[ 9.138062] systemd[1]: Started udev Coldplug all Devices.
[ 9.139151] systemd[1]: Starting udev Wait for Complete Device
Initialization...
[ 9.142382] ppdev: user-space parallel port driver
[ 9.145618] systemd[1]: Started Create Static Device Nodes in /dev.
[ 9.145829] systemd[1]: Starting udev Kernel Device Manager...
[ 9.147609] systemd[1]: Started Increase datagram queue length.
[ 9.149341] systemd[1]: Mounted Debug File System.
[ 9.150757] systemd[1]: Mounted POSIX Message Queue File System.
[ 9.151217] systemd[1]: Mounted Huge Pages File System.
[ 9.151683] systemd[1]: Mounted Temporary Directory.
[ 9.152557] fuse init (API version 7.23)
[ 9.154341] systemd-udevd[247]: starting version 215
[ 9.155152] systemd[1]: Started udev Kernel Device Manager.
[ 9.156344] systemd[1]: Started Load Kernel Modules.
[ 9.165442] systemd[1]: Mounted Configuration File System.
[ 9.165537] systemd[1]: Starting Apply Kernel Variables...
[ 9.166586] systemd[1]: Mounting FUSE Control File System...
[ 9.167464] systemd[1]: Starting LSB: QEMU KVM module loading script...
[ 9.168332] systemd[1]: Starting LSB: Tune IDE hard disks...
[ 9.169215] systemd[1]: Starting LSB: Set preliminary keymap...
[ 9.170121] systemd[1]: Starting Syslog Socket.
[ 9.170599] systemd[1]: Listening on Syslog Socket.
[ 9.170697] systemd[1]: Starting Journal Service...
[ 9.171975] systemd[1]: Started Journal Service.
[ 9.309073] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.310360] EDAC MC: Ver: 3.0.0
[ 9.313933] EDAC MC0: Giving out device to module i7core_edac.c controller
i7 core #0: DEV 0000:7f:03.0 (POLLED)
[ 9.314077] EDAC PCI0: Giving out device to module i7core_edac controller
EDAC PCI controller: DEV 0000:7f:03.0 (POLLED)
[ 9.314385] EDAC MC1: Giving out device to module i7core_edac.c controller
i7 core #1: DEV 0000:7e:03.0 (POLLED)
[ 9.314495] EDAC PCI1: Giving out device to module i7core_edac controller
EDAC PCI controller: DEV 0000:7e:03.0 (POLLED)
[ 9.314591] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[ 9.317996] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 9.318124] ACPI: Power Button [PBTN]
[ 9.318254] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.318376] ACPI: Power Button [PWRF]
[ 9.321139] wmi: Mapper loaded
[ 9.333213] snd_hda_intel 0000:00:1b.0: irq 93 for MSI/MSI-X
[ 9.348044] sound hdaudioC0D0: ALC262: SKU not ready 0x411111f0
[ 9.348419] sound hdaudioC0D0: autoconfig: line_outs=1
(0x15/0x0/0x0/0x0/0x0) type:line
[ 9.348543] sound hdaudioC0D0: speaker_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 9.348640] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 9.348732] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.348820] sound hdaudioC0D0: inputs:
[ 9.348906] sound hdaudioC0D0: Front Mic=0x19
[ 9.348993] sound hdaudioC0D0: Rear Mic=0x18
[ 9.349081] sound hdaudioC0D0: Line=0x1a
[ 9.349335] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.358462] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
[ 9.358874] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.359041] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 9.359283] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 9.359467] input: HDA Intel Line Out as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 9.359624] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.362914] SSE version of gcm_enc/dec engaged.
[ 9.366248] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 9.368174] alg: No test for crc32 (crc32-pclmul)
[ 9.382084] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly.
Using workaround
[ 9.385650] iTCO_vendor_support: vendor-support=0
[ 9.386534] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.386662] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by
hardware/BIOS
[ 9.707392] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 9.731552] Adding 19530748k swap on /dev/sda2. Priority:-1 extents:1
across:19530748k FS
[ 10.147126] device-mapper: uevent: version 1.0.3
[ 10.148018] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised:
dm-de...@redhat.com
[ 10.554540] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 10.567232] systemd-journald[259]: Received request to flush runtime journal
from PID 1
[ 908.988860] aufs aufs_encode_fh:741:systemd-tmpfile[1383]: nfs branch is not
exportable
[ 1918.099642] Key type dns_resolver registered
[ 1918.116907] NFS: Registering the id_resolver key type
[ 1918.117011] Key type id_resolver registered
[ 1918.117023] Key type id_legacy registered
[ 1996.134964] perf interrupt took too long (2505 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[260284.608547] aufs aufs_encode_fh:741:systemd-tmpfile[21074]: nfs branch is
not exportable
[268019.479413] aufs au_new_inode:432:apt-get[25455]: Warning: Un-notified UDBA
or repeatedly renamed dir, b1, nfs, status, hi1465143, i8889.
[606144.112386] aufs aufs_encode_fh:741:systemd-tmpfile[15858]: nfs branch is
not exportable
[951983.590945] aufs aufs_encode_fh:741:systemd-tmpfile[16932]: nfs branch is
not exportable
[1138787.018496] perf interrupt took too long (5003 > 5000), lowering
kernel.perf_event_max_sample_rate to 25000
[1279997.396587] aufs au_new_inode:432:mandb[9116]: Warning: Un-notified UDBA
or repeatedly renamed dir, b1, nfs, IO::Compress::Base.3perl.gz, hi1466900,
i181364.
[1280005.888071] aufs au_new_inode:432:mandb[9116]: Warning: Un-notified UDBA
or repeatedly renamed dir, b1, nfs, c2ph.1.gz, hi1482525, i13848.
[1297824.590102] aufs aufs_encode_fh:741:systemd-tmpfile[26950]: nfs branch is
not exportable
[1483656.110905] traps: mutt[2352] trap invalid opcode ip:43af5f
sp:7ffed1068fb0 error:0 in mutt[400000+d7000]
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Z800 Workstation
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 786G5 v03.13
board_vendor: Hewlett-Packard
board_name: 0AECh
board_version: D
** Loaded modules:
rpcsec_gss_krb5
auth_rpcgss
oid_registry
nfsv4
dns_resolver
binfmt_misc
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
dm_mod
hp_wmi
iTCO_wdt
sparse_keymap
iTCO_vendor_support
rfkill
intel_powerclamp
coretemp
evdev
kvm_intel
kvm
crc32_pclmul
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
psmouse
serio_raw
pcspkr
snd_hda_codec_realtek
snd_hda_codec_generic
lpc_ich
mfd_core
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
wmi
button
snd_pcm
snd_timer
acpi_cpufreq
i7core_edac
snd
soundcore
edac_core
shpchp
processor
thermal_sys
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
nfsv3
nfs_acl
nfs
lockd
sunrpc
fscache
bnx2
aufs(C)
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
libahci
ehci_pci
uhci_hcd
libata
firewire_ohci
tg3
firewire_core
ehci_hcd
crc_itu_t
ptp
scsi_mod
pps_core
libphy
usbcore
usb_common
floppy
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 13)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f8000000-faffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at d040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fd004800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller [8086:3a3e]
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 93
Region 0: Memory at fd000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: df100000-df2fffff
Prefetchable memory behind bridge: 00000000df300000-00000000df4fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fc0fffff
Prefetchable memory behind bridge: 00000000df500000-00000000df6fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fb000000-fb0fffff
Prefetchable memory behind bridge: 00000000df700000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at d060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at d0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fd004c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=37, subordinate=37, sec-latency=32
Memory behind bridge: df000000-df0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller [8086:3a16]
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA Controller
[RAID mode] [8086:2822]
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 91
Region 0: I/O ports at d100 [size=8]
Region 1: I/O ports at d110 [size=4]
Region 2: I/O ports at d108 [size=8]
Region 3: I/O ports at d114 [size=4]
Region 4: I/O ports at d0c0 [size=32]
Region 5: Memory at fd004000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M
Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5764M
Gigabit Ethernet PCIe [14e4:1684] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 92
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc010000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
0f:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96GL [Quadro FX
580] [10de:0659] (rev a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device [10de:063a]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at e000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
37:09.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a
Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
40:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=40, secondary=42, subordinate=42, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=40, secondary=60, subordinate=60, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
40:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link
Layer Registers Port 0 [8086:3425] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol
Layer Registers Port 0 [8086:3426] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
40:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer
Registers Port 1 [8086:3427] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer
Register Port 1 [8086:3428] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
40:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and
Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
40:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution
Technology Registers [8086:342f] (rev 13) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
7e:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:2d91] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
0 [8086:2d92] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
1 [8086:2d93] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:2d95] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7e:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture Generic Non-core Registers [8086:2c70] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath
Architecture System Address Decoder [8086:2d81] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0
[8086:2d90] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0
[8086:2d91] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
0 [8086:2d92] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link
1 [8086:2d93] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1
[8086:2d94] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1
[8086:2d95] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Registers [8086:2d98] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Target Address Decoder [8086:2d99] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller RAS Registers [8086:2d9a] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Test Registers [8086:2d9c] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Control [8086:2da0] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Address [8086:2da1] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Rank [8086:2da2] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Control [8086:2da8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Address [8086:2da9] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Rank [8086:2daa] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Control [8086:2db0] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Address [8086:2db1] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Rank [8086:2db2] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
7f:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated
Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:130b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
ii firmware-bnx2 0.43
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
