--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-46
Severity: important
Kernel oops present make server unstable, even crash. I need to reboot manually.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=04e90568-d268-4638-be3b-e177a4c74831 ro quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[15195.802306] st 2:0:0:0: Attached scsi tape st0
[15195.802309] st 2:0:0:0: st0: try direct i/o: yes (alignment 512 B)
[15195.843026] osst :I: Tape driver with OnStream support version 0.99.4
[15195.843028] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[107944.206846] ------------[ cut here ]------------
[107944.206851] kernel BUG at
/build/buildd-linux-2.6_2.6.32-46-amd64-_ApuPc/linux-2.6-2.6.32/debian/build/source_amd64_none/mm/slub.c:2969!
[107944.206855] invalid opcode: 0000 [#1] SMP
[107944.206859] last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0/scsi_tape/nst0a/uevent
[107944.206862] CPU 1
[107944.206864] Modules linked in: osst st usb_storage vboxnetadp vboxnetflt
vboxdrv cpufreq_userspace cpufreq_conservative cpufreq_powersave cpufreq_stats
parport_pc ppdev lp parport binfmt_misc fuse loop radeon ttm drm_kms_helper drm
i2c_algo_bit i2c_core hpilo hpwdt shpchp pci_hotplug iTCO_wdt
iTCO_vendor_support psmouse evdev pcspkr serio_raw processor button power_meter
container joydev ext4 mbcache jbd2 crc16 sr_mod cdrom ata_generic usbhid hid
hpsa ata_piix uhci_hcd ehci_hcd usbcore libata nls_base bnx2 cciss thermal
scsi_mod thermal_sys [last unloaded: scsi_wait_scan]
[107944.206914] Pid: 3644, comm: udisks-daemon Not tainted 2.6.32-5-amd64 #1
ProLiant DL380 G7
[107944.206917] RIP: 0010:[<ffffffff810e781f>] [<ffffffff810e781f>]
kfree+0x55/0xcb
[107944.206930] RSP: 0018:ffff88021c7ffa48 EFLAGS: 00010246
[107944.206933] RAX: 060000000000082c RBX: ffff88021c705a70 RCX:
ffffffffa00104c0
[107944.206936] RDX: ffff88021c705a40 RSI: ffff8802274120d0 RDI:
ffffea000e000000
[107944.206939] RBP: ffff880400000000 R08: ffffffff8149bd88 R09:
ffffffff81479930
[107944.206942] R10: 00000001019b8b6c R11: ffffffff810b5dcb R12:
ffffffffa01386db
[107944.206945] R13: 0000000000000001 R14: ffff880400000000 R15:
ffff88041eac8360
[107944.206949] FS: 00007fa52774a7a0(0000) GS:ffff880227400000(0000)
knlGS:0000000000000000
[107944.206952] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[107944.206955] CR2: 00007f9a6d38c000 CR3: 000000021cd1c000 CR4:
00000000000026e0
[107944.206958] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[107944.206961] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[107944.206964] Process udisks-daemon (pid: 3644, threadinfo ffff88021c7fe000,
task ffff880213c8f100)
[107944.206967] Stack:
[107944.206968] ffff88021c705a70 ffff88021c705a40 0000000000000000
ffffffffa01386db
[107944.206973] <0> 0000000000000296 ffff88021c7ffa98 ffff88021c7ffef8
ffffffff81067ccf
[107944.206977] <0> ffff88021c7ffb88 ffffffff812fc4bf ffff88041cc0fa99
ffff8802274101b0
[107944.206982] Call Trace:
[107944.206991] [<ffffffffa01386db>] ? sr_media_change+0x253/0x27a [sr_mod]
[107944.206998] [<ffffffff81067ccf>] ? hrtimer_cancel+0xc/0x16
[107944.207004] [<ffffffff812fc4bf>] ? schedule_hrtimeout_range+0xd5/0x112
[107944.207011] [<ffffffffa012a074>] ? media_changed+0x42/0x74 [cdrom]
[107944.207018] [<ffffffff8111205a>] ? check_disk_change+0x22/0x53
[107944.207023] [<ffffffffa012e808>] ? cdrom_open+0x8d2/0x962 [cdrom]
[107944.207030] [<ffffffff810fc31e>] ? do_sys_poll+0x316/0x391
[107944.207034] [<ffffffff810fcfa5>] ? __pollwait+0x0/0xd6
[107944.207038] [<ffffffff810fd07b>] ? pollwake+0x0/0x59
[107944.207042] [<ffffffff810fd07b>] ? pollwake+0x0/0x59
[107944.207047] [<ffffffff8101166e>] ? apic_timer_interrupt+0xe/0x20
[107944.207054] [<ffffffff811537ce>] ? cap_inode_permission+0x0/0x3
[107944.207060] [<ffffffff8118fb3b>] ? kobject_get+0x12/0x17
[107944.207065] [<ffffffff81184624>] ? get_disk+0x95/0xb4
[107944.207072] [<ffffffff8122317c>] ? kobj_lookup+0x169/0x1a1
[107944.207075] [<ffffffff8118fb3b>] ? kobject_get+0x12/0x17
[107944.207081] [<ffffffffa0138464>] ? sr_block_open+0x86/0x9f [sr_mod]
[107944.207084] [<ffffffff81112efd>] ? __blkdev_get+0x258/0x342
[107944.207088] [<ffffffff81112fee>] ? blkdev_open+0x0/0x96
[107944.207091] [<ffffffff81113055>] ? blkdev_open+0x67/0x96
[107944.207096] [<ffffffff810ed976>] ? __dentry_open+0x19d/0x2bf
[107944.207100] [<ffffffff810f91d7>] ? do_filp_open+0x4e4/0x94b
[107944.207106] [<ffffffffa012bfce>] ? cdrom_release+0x1ae/0x1fe [cdrom]
[107944.207113] [<ffffffff81097eea>] ? rcu_start_gp+0x197/0x1c0
[107944.207119] [<ffffffff810168f3>] ? read_tsc+0xa/0x20
[107944.207124] [<ffffffff8106bb5e>] ? timekeeping_get_ns+0xe/0x2e
[107944.207129] [<ffffffff811021f9>] ? alloc_fd+0x67/0x10c
[107944.207133] [<ffffffff810ed707>] ? do_sys_open+0x55/0xfc
[107944.207137] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[107944.207139] Code: 83 c3 08 48 83 3b 00 eb ec 48 83 fd 10 0f 86 89 00 00 00
48 89 ef e8 b9 e8 ff ff 48 89 c7 48 8b 00 84 c0 78 13 66 a9 00 c0 75 04 <0f> 0b
eb fe 5b 5d 41 5c e9 38 54 fd ff 48 8b 4c 24 18 4c 8b 4f
[107944.207171] RIP [<ffffffff810e781f>] kfree+0x55/0xcb
[107944.207176] RSP <ffff88021c7ffa48>
[107944.207193] ---[ end trace 6c2b060670efb8dc ]---
[177673.044881] general protection fault: 0000 [#2] SMP
[177673.044887] last sysfs file:
/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/host2/target2:0:0/2:0:0:0/scsi_tape/nst0a/uevent
[177673.044891] CPU 1
[177673.044893] Modules linked in: osst st usb_storage vboxnetadp vboxnetflt
vboxdrv cpufreq_userspace cpufreq_conservative cpufreq_powersave cpufreq_stats
parport_pc ppdev lp parport binfmt_misc fuse loop radeon ttm drm_kms_helper drm
i2c_algo_bit i2c_core hpilo hpwdt shpchp pci_hotplug iTCO_wdt
iTCO_vendor_support psmouse evdev pcspkr serio_raw processor button power_meter
container joydev ext4 mbcache jbd2 crc16 sr_mod cdrom ata_generic usbhid hid
hpsa ata_piix uhci_hcd ehci_hcd usbcore libata nls_base bnx2 cciss thermal
scsi_mod thermal_sys [last unloaded: scsi_wait_scan]
[177673.044943] Pid: 21962, comm: apt-get Tainted: G D 2.6.32-5-amd64
#1 ProLiant DL380 G7
[177673.044946] RIP: 0010:[<ffffffff810e7d3c>] [<ffffffff810e7d3c>]
__kmalloc_track_caller+0xcd/0x13c
[177673.044956] RSP: 0018:ffff8802a10efdb8 EFLAGS: 00010086
[177673.044958] RAX: 0000000000000000 RBX: f1008805f1007e84 RCX:
0000000000000008
[177673.044961] RDX: ffff880227412090 RSI: 00000000000000d0 RDI:
0000000000000003
[177673.044964] RBP: 0000000000000246 R08: ffff88041eb83ae0 R09:
0000000000000000
[177673.044967] R10: 0000000000000000 R11: 0000000000000246 R12:
ffffffff8147bf10
[177673.044970] R13: 00000000000000d0 R14: 00000000000000d0 R15:
0000000000000005
[177673.044973] FS: 00007fa68cd2c720(0000) GS:ffff880227400000(0000)
knlGS:0000000000000000
[177673.044976] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[177673.044979] CR2: 00007fa68c8c8930 CR3: 00000002b0277000 CR4:
00000000000026e0
[177673.044982] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[177673.044985] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[177673.044989] Process apt-get (pid: 21962, threadinfo ffff8802a10ee000, task
ffff880213ce1c40)
[177673.044991] Stack:
[177673.044992] 0000000000000000 ffffffff811165f4 0000000813e7f700
0000000000000005
[177673.044997] <0> ffff88041eb83ae0 0000000000000002 ffff88041eb83ae0
0000000000000000
[177673.045001] <0> ffff88021ef632b8 ffffffff810c754e ffff88041eb83ae0
ffff88041c514e38
[177673.045006] Call Trace:
[177673.045013] [<ffffffff811165f4>] ? fsnotify_create_event+0xb1/0x174
[177673.045019] [<ffffffff810c754e>] ? kstrdup+0x2b/0x41
[177673.045023] [<ffffffff811165f4>] ? fsnotify_create_event+0xb1/0x174
[177673.045027] [<ffffffff8111ea07>] ? __posix_lock_file+0x4b7/0x4e7
[177673.045031] [<ffffffff811162d5>] ? fsnotify+0xb9/0x119
[177673.045035] [<ffffffff811164a7>] ? __fsnotify_parent+0xa5/0xd3
[177673.045041] [<ffffffff810f00f1>] ? __fput+0x78/0x1af
[177673.045045] [<ffffffff810ed5de>] ? filp_close+0x5b/0x62
[177673.045048] [<ffffffff810ed679>] ? sys_close+0x94/0xcd
[177673.045053] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[177673.045056] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b
94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b
04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83
[177673.045088] RIP [<ffffffff810e7d3c>] __kmalloc_track_caller+0xcd/0x13c
[177673.045092] RSP <ffff8802a10efdb8>
[177673.045096] ---[ end trace 6c2b060670efb8dd ]---
[183003.026359] usb 3-1: USB disconnect, address 3
** Model information
sys_vendor: HP
product_name: ProLiant DL380 G7
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: P67
** Loaded modules:
Module Size Used by
osst 45317 0
st 30916 0
usb_storage 40217 0
vboxnetadp 4193 0
vboxnetflt 12525 1
vboxdrv 1723671 3 vboxnetadp,vboxnetflt
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_stats 2740 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
binfmt_misc 6431 1
fuse 50924 1
loop 11799 0
radeon 574796 2
ttm 40146 1 radeon
drm_kms_helper 20369 1 radeon
drm 143072 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4209 1 radeon
i2c_core 15819 4 radeon,drm_kms_helper,drm,i2c_algo_bit
hpilo 6268 0
hpwdt 4916 0
shpchp 26232 0
pci_hotplug 21587 1 shpchp
iTCO_wdt 10005 0
iTCO_vendor_support 1697 1 iTCO_wdt
psmouse 49985 0
evdev 7352 6
pcspkr 1699 0
serio_raw 3752 0
processor 29935 24
button 4650 0
power_meter 8302 0
container 2389 0
joydev 8459 0
ext4 288382 3
mbcache 5050 1 ext4
jbd2 67111 1 ext4
crc16 1319 1 ext4
sr_mod 12602 1
cdrom 29351 1 sr_mod
ata_generic 3239 0
usbhid 33292 0
hid 63257 1 usbhid
hpsa 34718 0
ata_piix 21124 2
uhci_hcd 18521 0
ehci_hcd 32097 0
usbcore 123271 5 usb_storage,usbhid,uhci_hcd,ehci_hcd
libata 133776 2 ata_generic,ata_piix
nls_base 6377 1 usbcore
bnx2 57385 0
cciss 83382 6
thermal 11674 0
scsi_mod 126725 7 osst,st,usb_storage,sr_mod,hpsa,libata,cciss
thermal_sys 11942 2 processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether b4:99:ba:05:b9:f6 brd ff:ff:ff:ff:ff:ff
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether b4:99:ba:05:b9:f8 brd ff:ff:ff:ff:ff:ff
4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether b4:99:ba:05:b9:fa brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether b4:99:ba:05:b9:fc brd ff:ff:ff:ff:ff:ff
inet 10.101.248.68/27 brd 10.101.248.95 scope global eth3
inet6 fe80::b699:baff:fe05:b9fc/64 scope link
valid_lft forever preferred_lft forever
6: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo:19284964 61381 0 0 0 0 0 0 19284964
61381 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth2: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth3:3194489299 18867853 0 0 0 0 0 6
34822567385 27595944 0 0 0 0 0 0
vboxnet0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
20561162 total packets received
3361 with invalid addresses
0 forwarded
0 incoming packets discarded
20536096 incoming packets delivered
16825399 requests sent out
158 dropped because of missing route
Icmp:
3772 ICMP messages received
343 input ICMP message failed.
ICMP input histogram:
destination unreachable: 2765
redirects: 3
echo requests: 190
echo replies: 475
4331 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2769
echo request: 1372
echo replies: 190
IcmpMsg:
InType0: 475
InType3: 2765
InType5: 3
InType8: 190
InType9: 339
OutType0: 190
OutType3: 2769
OutType8: 1372
Tcp:
396 active connections openings
790 passive connection openings
18 failed connection attempts
54 connection resets received
10 connections established
20489066 segments received
16793858 segments send out
24659 segments retransmited
0 bad segments received.
274 resets sent
Udp:
64340 packets received
7 packets to unknown port received.
1083 packet receive errors
2741 packets sent
RcvbufErrors: 1083
UdpLite:
TcpExt:
15 resets received for embryonic SYN_RECV sockets
2 ICMP packets dropped because they were out-of-window
222 TCP sockets finished time wait in fast timer
3043 delayed acks sent
3 delayed acks further delayed because of locked socket
Quick ack mode was activated 22 times
693525 packets directly queued to recvmsg prequeue.
1181549 bytes directly in process context from backlog
1004919676 bytes directly received in process context from prequeue
3331629 packet headers predicted
700496 packets header predicted and directly queued to user
5930139 acknowledgments not containing data payload received
3376165 predicted acknowledgments
17 times recovered from packet loss by selective acknowledgements
11 congestion windows recovered without slow start by DSACK
6 congestion windows recovered without slow start after partial ack
5 TCP data loss events
2 timeouts after SACK recovery
39 fast retransmits
26 forward retransmits
24 retransmits in slow start
22492 other TCP timeouts
3 SACK retransmits failed
33 DSACKs sent for old packets
141 DSACKs received
5 connections reset due to unexpected data
9 connections reset due to early user close
27 connections aborted due to timeout
1 times unabled to send RST due to no memory
TCPDSACKIgnoredOld: 131
TCPSackShifted: 141
TCPSackMerged: 17
TCPSackShiftFallback: 41
IpExt:
InMcastPkts: 423
InBcastPkts: 42340
OutBcastPkts: 768
InOctets: -1327578108
OutOctets: -474673081
InMcastOctets: 14556
InBcastOctets: 5996211
OutBcastOctets: 160558
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port
[8086:3406] (rev 13)
Subsystem: Hewlett-Packard Company ProLiant DL160 G6 [103c:330b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fbb00000-fbdfffff
Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 2 [8086:3409] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=11, subordinate=15, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root
Port 4 [8086:340b] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1a, subordinate=1c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root
Port 5 [8086:340c] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=16, subordinate=18, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root
Port 6 [8086:340d] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=19, subordinate=19, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=10, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 8 [8086:340f] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express
Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 Host bridge [0600]: Intel Corporation Device [8086:343a] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.1 Host bridge [0600]: Intel Corporation Device [8086:343b] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.2 Host bridge [0600]: Intel Corporation Device [8086:343c] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.3 Host bridge [0600]: Intel Corporation Device [8086:343d] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.4 Host bridge [0600]: Intel Corporation 5520/5500/X58 Physical Layer Port
0 [8086:3418] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.5 Host bridge [0600]: Intel Corporation 5520/5500 Physical Layer Port 1
[8086:3419] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0d.6 Host bridge [0600]: Intel Corporation Device [8086:341a] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.0 Host bridge [0600]: Intel Corporation Device [8086:341c] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.1 Host bridge [0600]: Intel Corporation Device [8086:341d] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.2 Host bridge [0600]: Intel Corporation Device [8086:341e] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.3 Host bridge [0600]: Intel Corporation Device [8086:341f] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:0e.4 Host bridge [0600]: Intel Corporation Device [8086:3439] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and
RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Subsystem: Device [003c:000b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2000000-f5ffffff
Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 3 [8086:3a44] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f6000000-f9ffffff
Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express
Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f1d00000-f1ffffff
Prefetchable memory behind bridge: 00000000e4300000-00000000e43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 1020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 1040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at 1060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f1c00000-f1cfffff
Prefetchable memory behind bridge: 00000000e8000000-00000000efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company Device [103c:330d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1080 [size=8]
Region 1: I/O ports at 1088 [size=4]
Region 2: I/O ports at 1090 [size=8]
Region 3: I/O ports at 1098 [size=4]
Region 4: I/O ports at 10a0 [size=16]
Region 5: I/O ports at 10b0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:03.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:31fb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at f1cf0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f1c00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 System peripheral [0880]: Hewlett-Packard Company Integrated Lights-Out
Standard Slave Instrumentation & System Support [103c:3306] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:3309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at f1ff0000 (32-bit, non-prefetchable) [size=512]
Region 2: I/O ports at 3400 [size=256]
Capabilities: <access denied>
Kernel driver in use: hpwdt
02:00.2 System peripheral [0880]: Hewlett-Packard Company Integrated Lights-Out
Standard Management Processor Support and Messaging [103c:3307] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:3309]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 3800 [size=256]
Region 1: Memory at f1fe0000 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at f1e00000 (32-bit, non-prefetchable) [size=1M]
Region 3: Memory at f1d80000 (32-bit, non-prefetchable) [size=512K]
Region 4: Memory at f1d70000 (32-bit, non-prefetchable) [size=32K]
Region 5: Memory at f1d60000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at e4300000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: hpilo
02:00.4 USB controller [0c03]: Hewlett-Packard Company Integrated Lights-Out
Standard Virtual USB Controller [103c:3300] (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company iLO2 GXL/iLO3 GXE [103c:3309]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 3c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Multi-port PCI
Express Gigabit Server Adapter [103c:7055]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e4100000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: bnx2
03:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Multi-port PCI
Express Gigabit Server Adapter [103c:7055]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e4110000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: bnx2
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Multi-port PCI
Express Gigabit Server Adapter [103c:7055]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e4200000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: bnx2
04:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709
Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Hewlett-Packard Company NC382i Integrated Multi-port PCI
Express Gigabit Server Adapter [103c:7055]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
[virtual] Expansion ROM at e4210000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: bnx2
05:00.0 RAID bus controller [0104]: Hewlett-Packard Company Smart Array G6
controllers [103c:323a] (rev 01)
Subsystem: Hewlett-Packard Company Smart Array P410i [103c:3245]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fbc00000 (64-bit, non-prefetchable) [size=2M]
Region 2: Memory at fbbf0000 (64-bit, non-prefetchable) [size=4K]
Region 4: I/O ports at 4000 [size=256]
[virtual] Expansion ROM at e4000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: cciss
11:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X
Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=11, secondary=12, subordinate=14, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
11:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X
Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=128]
Bus: primary=11, secondary=15, subordinate=15, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
** Sound cards:
-- System Information:
Debian Release: 6.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/24 CPU cores)
Locale: LANG=es_AR.UTF-8, LC_CTYPE=es_AR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.43 Debian configuration management sy
ii initramfs-tools [linux-initra 0.102 generic modular initramfs generato
ii linux-base 3.5 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
ii firmware-bnx2 0.28+squeeze1 Binary firmware for Broadcom NetXt
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
--- End Message ---
