--- Begin Message ---
Package: linux-2.6
Version: 3.2.9-1
Severity: important
Dear Maintainer,
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
I do not recall observing the following behavior before installing a 3.x
kernel, which I did as part of updating LMDE.
I have observed similar behavior with different hardware (a ThinkPad W510) with
same distro/version (LMDE update pack 4).
The problem is often but intermittently observed on resume from sleep/suspend
(which I do frequently).
I believe it happens most often when I do the following sequence:
1 physically attach a USB drive to my system, which automounts (almost always
as sdb, i.e. no other external drives)
Note the USB drive (a Sansa+ mp3 player) itself contains a microSD card,
which may complicate matters.
2 umount the USB drive but leave it physically attached
3 sleep the PC
4 physically detach the USB drive
5 wake the PC
This produces boot to white text messages on black screen. Often the system
will hang at this point.
Today I was able to C-A-F7 (C-A-F1 .. C-A-F6 had no effect) to the graphical
login, whereupon I observed the following text in all terminal tabs:
> Message from syslogd@tlrPanP5 at Jul 20 11:21:12 ...
> kernel:[99821.505724] Oops: 0000 [#1] SMP
> Message from syslogd@tlrPanP5 at Jul 20 11:21:12 ...
> kernel:[99821.507390] Stack:
> Message from syslogd@tlrPanP5 at Jul 20 11:21:12 ...
> kernel:[99821.507589] Call Trace:
> Message from syslogd@tlrPanP5 at Jul 20 11:21:12 ...
> kernel:[99821.508029] Code: 31 f6 88 c2 83 e2 ef a8 02 88 95 bc 02 00 00 74
> 13 83 e0 08 3c 01 19 f6 81 e6 00 fc ff ff 81 c6 00 0c 00 00 48 8b 85 88 02 00
> 00 <48> 8b b8 30 03 00 00 e8 75 d9 08 e1 48 8b 85 98 02 00 00 48 8b
> Message from syslogd@tlrPanP5 at Jul 20 11:21:12 ...
> kernel:[99821.508029] CR2: 0000000000000330
In my experience, observing text such as the above usually indicate system
instability.
(Note, that, in the scenario above, the message format above is constant: what
changes is
* the strings in square brackets (though they are invariably [0-9]{5}\.[0-9]{6})
* the string following 'Code: '
* the sting following 'CR2: '
) I.e., if I continue using the system after observing the above, it will lock
up within a matter of hours.
* What outcome did you expect instead?
I expect the system to restart normally and stably, whether or not a device is
physically attached or detached.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.9-1) (debian-kernel@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Mar 4 22:48:17 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64
root=UUID=5821418b-0f83-43b0-99f2-77964602ef6b ro quiet
** Tainted: D (128)
* Kernel has oopsed before.
** Kernel log:
[99817.716239] jmb38x_ms 0000:07:00.3: setting latency timer to 64
[99817.716323] nouveau 0000:01:00.0: power state changed by ACPI to D0
[99817.716333] nouveau 0000:01:00.0: power state changed by ACPI to D0
[99817.716344] nouveau 0000:01:00.0: power state changed by ACPI to D0
[99817.716353] nouveau 0000:01:00.0: power state changed by ACPI to D0
[99817.716364] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[99817.716371] nouveau 0000:01:00.0: setting latency timer to 64
[99817.716378] [drm] nouveau 0000:01:00.0: POSTing device...
[99817.716384] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset
0xDBE1
[99817.716882] sd 0:0:0:0: [sda] Starting disk
[99817.741847] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset
0xDFE6
[99817.748233] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset
0xE8A9
[99817.748306] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset
0xE977
[99817.749456] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset
0xEC20
[99817.749460] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset
0xEC85
[99817.769392] [drm] nouveau 0000:01:00.0: Restoring GPU objects...
[99818.036075] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[99818.038689] ata2.00: configured for UDMA/100
[99818.044062] ata6: SATA link down (SStatus 0 SControl 300)
[99818.052061] usb 8-2: reset full-speed USB device number 20 using uhci_hcd
[99818.052107] ata5: SATA link down (SStatus 0 SControl 300)
[99818.063047] [drm] nouveau 0000:01:00.0: Reinitialising engines...
[99818.063601] [drm] nouveau 0000:01:00.0: Restoring mode...
[99818.179182] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[99818.182635] Extended CMOS year: 2000
[99818.336052] usb 3-2: reset full-speed USB device number 2 using uhci_hcd
[99820.748173] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[99820.752597] ata1.00: configured for UDMA/133
[99820.780070] PM: resume of devices complete after 3068.344 msecs
[99820.780540] PM: Finishing wakeup.
[99820.780544] Restarting tasks ...
[99820.780625] usb 8-2: USB disconnect, device number 20
[99820.790054] done.
[99820.790077] video LNXVIDEO:00: Restoring backlight state
[99821.072210] usb 8-2: new full-speed USB device number 21 using uhci_hcd
[99821.220142] sdc: detected capacity change from 4001366016 to 0
[99821.251806] usb 8-2: not running at top speed; connect to a high speed hub
[99821.440836] usb 8-2: New USB device found, idVendor=5986, idProduct=0300
[99821.440853] usb 8-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[99821.440864] usb 8-2: Product: BisonCam, NB Pro
[99821.480145] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0300)
[99821.501361] input: BisonCam, NB Pro as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input15
[99821.502049] usb 2-2: USB disconnect, device number 18
[99821.505404] scsi 14:0:0:0: killing request
[99821.505534] BUG: unable to handle kernel NULL pointer dereference at
0000000000000330
[99821.505610] IP: [<ffffffffa010bd47>] sd_revalidate_disk+0x1591/0x1603
[sd_mod]
[99821.505678] PGD 131b9b067 PUD 131b9c067 PMD 0
[99821.505724] Oops: 0000 [#1] SMP
[99821.505760] CPU 0
[99821.505775] Modules linked in: ext3 jbd nls_utf8 nls_cp437 vfat fat
usb_storage uas acpi_cpufreq mperf cpufreq_powersave cpufreq_conservative
cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport rfcomm bnep
bluetooth binfmt_misc fuse loop snd_hda_codec_hdmi snd_hda_codec_si3054
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss
snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi arc4 snd_seq_midi_event snd_seq
joydev snd_timer iwlwifi mac80211 snd_seq_device nouveau cfg80211 snd ttm
drm_kms_helper drm uvcvideo i2c_algo_bit videodev jmb38x_ms media mxm_wmi
v4l2_compat_ioctl32 memstick wmi soundcore rfkill psmouse i2c_i801 battery
i2c_core iTCO_wdt iTCO_vendor_support snd_page_alloc video ac pcspkr evdev
serio_raw power_supply button processor ext4 mbcache jbd2 crc16 btrfs
zlib_deflate crc32c libcrc32c sd_mod crc_t10dif sr_mod cdrom uhci_hcd ahci
libahci thermal thermal_sys libata ehci_hcd r8169 sdhci_pci mii sdhci mmc_core
scsi_mod usbcore usb_common [last un
loaded: scsi_wait_scan]
[99821.506842]
[99821.506861] Pid: 3122, comm: udisks-daemon Not tainted 3.2.0-2-amd64 #1
System76, Inc. Pangolin Performance/Pangolin Performance
[99821.506928] RIP: 0010:[<ffffffffa010bd47>] [<ffffffffa010bd47>]
sd_revalidate_disk+0x1591/0x1603 [sd_mod]
[99821.506992] RSP: 0000:ffff88012eb49af8 EFLAGS: 00010246
[99821.507017] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[99821.507057] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[99821.507092] RBP: ffff880050163c00 R08: 0000000000000000 R09: ffff88013ae8a730
[99821.507123] R10: ffff88013ae8a730 R11: ffff880137b53b68 R12: ffff880101097c00
[99821.507156] R13: 0000000000000000 R14: 0000000000010000 R15: ffff88007cc70800
[99821.507189] FS: 00007f327dc047a0(0000) GS:ffff88013fc00000(0000)
knlGS:0000000000000000
[99821.507224] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[99821.507252] CR2: 0000000000000330 CR3: 0000000131b9a000 CR4: 00000000000406f0
[99821.507287] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[99821.507319] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[99821.507352] Process udisks-daemon (pid: 3122, threadinfo ffff88012eb48000,
task ffff880131b0b590)
[99821.507390] Stack:
[99821.507405] ffff880100001d4c ffffffff00000005 0000000000000000
ffff880138217c48
[99821.507469] 0000000000000000 0000000000000000 000000020000001d
ffff88012eb49b5d
[99821.507529] ffff8801365373c0 ffff880138217c00 ffff8801365373c0
00000000365373c0
[99821.507589] Call Trace:
[99821.507621] [<ffffffff81147d89>] ? rescan_partitions+0xac/0x41b
[99821.507661] [<ffffffff81121304>] ? __blkdev_get+0x1a6/0x37e
[99821.507700] [<ffffffff81121783>] ? blkdev_get+0x2a7/0x2a7
[99821.507732] [<ffffffff811216a3>] ? blkdev_get+0x1c7/0x2a7
[99821.507764] [<ffffffff81121783>] ? blkdev_get+0x2a7/0x2a7
[99821.507796] [<ffffffff810f79d2>] ? __dentry_open+0x19c/0x2b3
[99821.507834] [<ffffffff81100da4>] ? dget+0x12/0x1e
[99821.507863] [<ffffffff81103f14>] ? do_last+0x552/0x58c
[99821.507900] [<ffffffff81104546>] ? path_openat+0xce/0x32a
[99821.507936] [<ffffffff8103ada3>] ? ttwu_do_wakeup+0x50/0xc4
[99821.507971] [<ffffffff81104864>] ? do_filp_open+0x2a/0x6e
[99821.508006] [<ffffffff8134041f>] ? _cond_resched+0x7/0x1c
[99821.508029] [<ffffffff811b1b59>] ? __strncpy_from_user+0x18/0x48
[99821.508029] [<ffffffff8110d59b>] ? alloc_fd+0x64/0x109
[99821.508029] [<ffffffff810f8894>] ? do_sys_open+0x5e/0xe5
[99821.508029] [<ffffffff813466d2>] ? system_call_fastpath+0x16/0x1b
[99821.508029] Code: 31 f6 88 c2 83 e2 ef a8 02 88 95 bc 02 00 00 74 13 83 e0
08 3c 01 19 f6 81 e6 00 fc ff ff 81 c6 00 0c 00 00 48 8b 85 88 02 00 00 <48> 8b
b8 30 03 00 00 e8 75 d9 08 e1 48 8b 85 98 02 00 00 48 8b
[99821.508029] RIP [<ffffffffa010bd47>] sd_revalidate_disk+0x1591/0x1603
[sd_mod]
[99821.508029] RSP <ffff88012eb49af8>
[99821.508029] CR2: 0000000000000330
[99821.534735] ---[ end trace ce7085fa4c153ebe ]---
[99822.301683] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[99822.304730] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[99822.371567] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[99822.385606] r8169 0000:06:00.0: eth1: link down
[99822.385631] r8169 0000:06:00.0: eth1: link down
[99822.388645] ADDRCONF(NETDEV_UP): eth1: link is not ready
[99824.051962] r8169 0000:06:00.0: eth1: link up
[99824.054188] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[99834.528167] eth1: no IPv6 routers present
** Model information
sys_vendor: System76, Inc.
product_name: Pangolin Performance
product_version: panp5
chassis_vendor: No Enclosure
chassis_version: N/A
bios_vendor: Phoenix Technologies LTD
bios_version: 1.02.22
board_vendor: System76, Inc.
board_name: Pangolin Performance
board_version: panp5
** Loaded modules:
ext3
jbd
nls_utf8
nls_cp437
vfat
fat
usb_storage
uas
acpi_cpufreq
mperf
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
parport_pc
ppdev
lp
parport
rfcomm
bnep
bluetooth
binfmt_misc
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_si3054
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
arc4
snd_seq_midi_event
snd_seq
joydev
snd_timer
iwlwifi
mac80211
snd_seq_device
nouveau
cfg80211
snd
ttm
drm_kms_helper
drm
uvcvideo
i2c_algo_bit
videodev
jmb38x_ms
media
mxm_wmi
v4l2_compat_ioctl32
memstick
wmi
soundcore
rfkill
psmouse
i2c_i801
battery
i2c_core
iTCO_wdt
iTCO_vendor_support
snd_page_alloc
video
ac
pcspkr
evdev
serio_raw
power_supply
button
processor
ext4
mbcache
jbd2
crc16
btrfs
zlib_deflate
crc32c
libcrc32c
sd_mod
crc_t10dif
sr_mod
cdrom
uhci_hcd
ahci
libahci
thermal
thermal_sys
libata
ehci_hcd
r8169
sdhci_pci
mii
sdhci
mmc_core
scsi_mod
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:90:f5:91:00:cc brd ff:ff:ff:ff:ff:ff
inet 24.225.71.133/23 brd 24.225.71.255 scope global eth1
inet6 fe80::290:f5ff:fe91:cc/64 scope link
valid_lft forever preferred_lft forever
3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen
1000
link/ether 00:22:fa:27:20:36 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 57813 744 0 0 0 0 0 0 57813
744 0 0 0 0 0 0
eth1: 467290027 1225232 0 0 0 0 0 0 27024128
241032 0 0 0 0 0 0
wlan0: 1079060 6745 0 0 0 0 0 0 399993
2849 0 0 0 0 0 0
*** Protocol statistics:
Ip:
369980 total packets received
1420 with invalid addresses
0 forwarded
0 incoming packets discarded
367867 incoming packets delivered
243034 requests sent out
620 dropped because of missing route
Icmp:
361 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 356
echo requests: 5
375 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 370
echo replies: 5
IcmpMsg:
InType3: 356
InType8: 5
OutType0: 5
OutType3: 370
Tcp:
4330 active connections openings
0 passive connection openings
24 failed connection attempts
87 connection resets received
4 connections established
343530 segments received
230918 segments send out
262 segments retransmited
0 bad segments received.
273 resets sent
Udp:
14756 packets received
368 packets to unknown port received.
0 packet receive errors
11133 packets sent
UdpLite:
TcpExt:
192 packets pruned from receive queue because of socket buffer overrun
1784 TCP sockets finished time wait in fast timer
2187 delayed acks sent
Quick ack mode was activated 33 times
3 packets directly queued to recvmsg prequeue.
9908 bytes directly in process context from backlog
3 bytes directly received in process context from prequeue
271379 packet headers predicted
7 packets header predicted and directly queued to user
10937 acknowledgments not containing data payload received
19748 predicted acknowledgments
12 congestion windows recovered without slow start after partial ack
2 timeouts after SACK recovery
57 other TCP timeouts
27491 packets collapsed in receive queue due to low socket buffer
34 DSACKs sent for old packets
8 DSACKs received
6 connections reset due to unexpected data
71 connections reset due to early user close
64 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 3
TCPSackShiftFallback: 61
IpExt:
InMcastPkts: 3005
OutMcastPkts: 1430
InBcastPkts: 12113
InOctets: 411170497
OutOctets: 23879347
InMcastOctets: 308917
OutMcastOctets: 122124
InBcastOctets: 3749610
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f5000000-f7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f4604800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f4600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 00000000c0700000-00000000c08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c0300000-c04fffff
Prefetchable memory behind bridge: 00000000c0500000-00000000c06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f4200000-f42fffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f4300000-f43fffff
Prefetchable memory behind bridge: 00000000c0100000-00000000c02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f4604c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E)
4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 47
Region 0: I/O ports at 18f0 [size=8]
Region 1: I/O ports at 18e4 [size=4]
Region 2: I/O ports at 18e8 [size=8]
Region 3: I/O ports at 18e0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at f4604000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
01:00.0 VGA compatible controller [0300]: nVidia Corporation G98M [GeForce G
105M] [10de:06ec] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f4100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at f4200000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f4000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f4020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
07:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host
Controller [197b:2382]
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4300000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
07:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host
Controller [197b:2381] (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4300400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
07:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller
[197b:2383]
Subsystem: CLEVO/KAPOK Computer Device [1558:0806]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4300800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 021: ID 5986:0300 Acer, Inc
Bus 003 Device 002: ID 147e:2016 Upek Biometric Touchchip/Touchstrip
Fingerprint Sensor
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.101
ii linux-base 3.5
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn extlinux 2:4.05+dfsg-2
pn grub-pc 1.99-17
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros 0.35
pn firmware-bnx2 0.35
pn firmware-bnx2x 0.35
pn firmware-brcm80211 <none>
pn firmware-intelwimax 0.35
pn firmware-ipw2x00 0.35
pn firmware-ivtv 0.35
pn firmware-iwlwifi 0.35
pn firmware-libertas 0.35
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic 0.35
pn firmware-ralink 0.35
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
--- End Message ---
