--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-11
Severity: normal
I use a intel core 2 duo E4400 CPU at stock 2 GHz. /proc/cpuinfo
claims its frequency is 1000 MHz. cpufreq-info says its hardware
limit is 1000 MHz. During boot the kernel says:
[ 0.000000] Detected 1999.951 MHz processor.
[ 0.076234] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.164090] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
I'm not sure wether my CPU is running at 1 or 2 GHz.
This all happens while I run seti@home on both cores so the ondemand
governor, speedstep or whatever should switch to maximum frequency.
Indeed, ondemand switches to what it thinks is the maximum frequency.
Using the performance governor didn't help.
For a while mpg123 used 33% CPU for decoding a 96 kbit mono stream -
with and without seti@home, IIRC. Upon reporting this in
#deb...@irc.freenode.net it resorted to use the normal 0-6% CPU, as
it does now.
The CPU is not overheated. See the sensors output.
I tried to compare some benchmark results with published results, but
this was not completely convincing. I could only find results for
similar CPUs and they could have been wrong. I include the results of
'openssl speed' and the seti@home/boinc benchmarks run with the
performance governor. Maybe someone with a E4400 can post his results or
knows a place where they are published.
Bernhard
--------- /proc/cpuinfo ---------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
stepping : 13
cpu MHz : 1000.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16
xtpr pdcm lahf_lm
bogomips : 3999.90
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz
stepping : 13
cpu MHz : 1000.000
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16
xtpr pdcm lahf_lm
bogomips : 3999.81
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
--------------------------
--------------------- cpufreq-info ---------------------------
bernhard@be:/data/home/bernhard$ cpufreq-info
cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpuf...@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 160 us.
hardware limits: 600 MHz - 1000 MHz
available frequency steps: 1000 MHz, 800 MHz, 600 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand,
performance
current policy: frequency should be within 600 MHz and 1000 MHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1000 MHz.
cpufreq stats: 1000 MHz:74.60%, 800 MHz:0.03%, 600 MHz:25.36% (27)
analyzing CPU 1:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 160 us.
hardware limits: 600 MHz - 1000 MHz
available frequency steps: 1000 MHz, 800 MHz, 600 MHz
available cpufreq governors: conservative, userspace, powersave, ondemand,
performance
current policy: frequency should be within 600 MHz and 1000 MHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 1000 MHz.
cpufreq stats: 1000 MHz:74.57%, 800 MHz:0.05%, 600 MHz:25.37% (33)
------------------------------------------------
------------------ sersors --------------------
bernhard@be:/data/home/bernhard$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +75.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.28 V (min = +1.45 V, max = +1.75 V)
+3.3 Voltage: +3.30 V (min = +3.00 V, max = +3.60 V)
+5.0 Voltage: +5.05 V (min = +4.50 V, max = +5.50 V)
+12.0 Voltage: +11.96 V (min = +11.20 V, max = +13.20 V)
CPU FAN Speed: 1383 RPM (min = 0 RPM)
CHASSIS FAN Speed: 0 RPM (min = 0 RPM)
POWER FAN Speed: 0 RPM (min = 0 RPM)
CPU Temperature: +43.0°C (high = +90.0°C, crit = +125.0°C)
MB Temperature: +38.0°C (high = +70.0°C, crit = +125.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +63.0°C (high = +86.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C)
------------------------------------------------
--------------- openssl speed ---------------------
bernhard@be:/data/home/bernhard$ openssl speed
OpenSSL 0.9.8m 25 Feb 2010
built on: Sun Feb 28 23:11:25 UTC 2010
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial)
blowfish(idx)
compiler: gcc -fPIC -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT
-DDSO_DLFCN -DHAVE_DLFCN_H -DL_ENDIAN -DTERMIO -O3 -march=i686
-Wa,--noexecstack -g -Wall -DOPENSSL_BN_ASM_PART_WORDS -DOPENSSL_IA32_SSE2
-DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM
available timing options: TIMES TIMEB HZ=100 [sysconf value]
timing function used: times
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md2 1170.84k 2326.76k 3182.71k 3559.70k 3891.93k
mdc2 0.00 0.00 0.00 0.00 0.00
md4 25295.59k 88225.54k 247623.77k 447547.39k 584209.75k
md5 20460.62k 65786.59k 169007.84k 273405.94k 337196.37k
hmac(md5) 25379.68k 77176.89k 193811.45k 335726.37k 406958.90k
sha1 19982.68k 62649.19k 145024.77k 216148.99k 251447.98k
rmd160 12879.53k 33375.98k 64416.43k 83659.09k 91952.47k
rc4 185401.29k 206157.57k 237626.45k 231037.61k 175415.30k
des cbc 43527.63k 45415.48k 45450.02k 46824.25k 47016.43k
des ede3 16639.24k 16862.75k 16750.71k 16726.13k 16898.77k
idea cbc 0.00 0.00 0.00 0.00 0.00
seed cbc 0.00 0.00 0.00 0.00 0.00
rc2 cbc 19111.89k 19887.29k 19925.67k 19959.81k 19972.10k
rc5-32/12 cbc 0.00 0.00 0.00 0.00 0.00
blowfish cbc 70966.01k 74978.27k 76146.13k 75980.12k 75958.95k
cast cbc 42858.84k 44739.38k 47079.57k 45794.39k 46883.45k
aes-128 cbc 71254.17k 93417.38k 101217.54k 103485.78k 105764.18k
aes-192 cbc 63073.80k 79941.84k 86453.08k 87945.22k 89559.45k
aes-256 cbc 58417.25k 70324.90k 74766.25k 76249.30k 77837.84k
camellia-128 cbc 0.00 0.00 0.00 0.00 0.00
camellia-192 cbc 0.00 0.00 0.00 0.00 0.00
camellia-256 cbc 0.00 0.00 0.00 0.00 0.00
sha256 11632.25k 27090.83k 46535.66k 63217.78k 66383.78k
sha512 10965.44k 36488.35k 55398.84k 81865.13k 94197.08k
aes-128 ige 80395.87k 87977.57k 90791.81k 90606.19k 95993.51k
aes-192 ige 69892.34k 76883.33k 78987.98k 78036.65k 82315.28k
aes-256 ige 63234.95k 67397.89k 69229.79k 69306.53k 72561.00k
sign verify sign/s verify/s
rsa 512 bits 0.000570s 0.000045s 1754.3 22171.2
rsa 1024 bits 0.002705s 0.000119s 369.7 8434.0
rsa 2048 bits 0.014368s 0.000363s 69.6 2754.7
rsa 4096 bits 0.088333s 0.001197s 11.3 835.5
sign verify sign/s verify/s
dsa 512 bits 0.000460s 0.000522s 2173.5 1917.1
dsa 1024 bits 0.001148s 0.001366s 871.2 732.0
dsa 2048 bits 0.003478s 0.004087s 287.5 244.7
-----------------------------------------------------------
--------------- boinc benchmarks -----------------------
Sat 10 Apr 2010 11:35:07 PM CEST Running CPU benchmarks
Sat 10 Apr 2010 11:35:39 PM CEST Benchmark results:
Sat 10 Apr 2010 11:35:39 PM CEST Number of CPUs: 2
Sat 10 Apr 2010 11:35:39 PM CEST 1232 floating point MIPS
(Whetstone) per CPU
Sat 10 Apr 2010 11:35:39 PM CEST 4844 integer MIPS
(Dhrystone) per CPU
--------------------------------------------------------
-- Package-specific info:
** Version:
Linux version 2.6.32-4-686 (Debian 2.6.32-11) (m...@debian.org) (gcc version
4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 6 07:02:27 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-686
root=UUID=b4bb1076-75ba-41cd-a136-a9c2971b28a8 ro
** Tainted: P (1)
* Proprietary module has been loaded.
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-4-686 (Debian 2.6.32-11) (m...@debian.org)
(gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 6 07:02:27 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining
[ 0.000000] 2 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 376f8000 - 37fef500
[ 0.000000] Allocated new RAMDISK: 00100000 - 009f7500
[ 0.000000] Move RAMDISK from 00000000376f8000 - 0000000037fef4ff to
00100000 - 009f74ff
[ 0.000000] ACPI: RSDP 000f7750 00014 (v00 AWARD )
[ 0.000000] ACPI: RSDT 7fee3040 00038 (v01 AWARD AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: FACP 7fee30c0 00074 (v01 AWARD AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: DSDT 7fee3180 074E8 (v01 AWARD AWRDACPI 00001000 MSFT
0100000E)
[ 0.000000] ACPI: FACS 7fee0000 00040
[ 0.000000] ACPI: MCFG 7feea7c0 0003C (v01 AWARD AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: APIC 7feea6c0 00090 (v01 AWARD AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: SSDT 7feea840 0019E (v01 AWARD Cpu0Ist 00003000 INTL
20040311)
[ 0.000000] ACPI: SSDT 7feeacd0 00275 (v01 AWARD CpuPm 00003000 INTL
20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0001000000 - 00014bb4f4] TEXT DATA BSS ==> [0001000000
- 00014bb4f4]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000
- 0000100000]
[ 0.000000] #5 [00014bc000 - 00014c20fa] BRK ==> [00014bc000
- 00014c20fa]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #7 [0000100000 - 00009f7500] NEW RAMDISK ==> [0000100000
- 00009f7500]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000
- 0000019000]
[ 0.000000] found SMP MP-table at [c00f5cc0] f5cc0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] free_area_init_node: node 0, pgdat c13a8100, node_mem_map
c14c4200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap:
7ff00000:60100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34072 r0 d23272 u1048576
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 519793
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-4-686
root=UUID=b4bb1076-75ba-41cd-a136-a9c2971b28a8 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0007fee0)
[ 0.000000] Memory: 2062924k/2096000k available (2470k kernel code, 31532k
reserved, 1312k data, 372k init, 1190792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13b2000 - 0xc140f000 ( 372 kB)
[ 0.000000] .data : 0xc126991d - 0xc13b1c60 (1312 kB)
[ 0.000000] .text : 0xc1000000 - 0xc126991d (2470 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.951 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3999.90 BogoMIPS (lpj=7999804)
[ 0.004160] Security Framework initialized
[ 0.004234] SELinux: Disabled at boot.
[ 0.004307] Mount-cache hash table entries: 512
[ 0.004546] Initializing cgroup subsys ns
[ 0.004617] Initializing cgroup subsys cpuacct
[ 0.004687] Initializing cgroup subsys devices
[ 0.004756] Initializing cgroup subsys freezer
[ 0.004825] Initializing cgroup subsys net_cls
[ 0.004917] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.005040] CPU: L2 cache: 2048K
[ 0.005108] CPU: Physical Processor ID: 0
[ 0.005176] CPU: Processor Core ID: 0
[ 0.005246] mce: CPU supports 6 MCE banks
[ 0.005321] CPU0: Thermal monitoring enabled (TM1)
[ 0.005394] using mwait in idle threads.
[ 0.005468] Performance Events: Core2 events, Intel PMU driver.
[ 0.005651] ... version: 2
[ 0.005719] ... bit width: 40
[ 0.005787] ... generic registers: 2
[ 0.005855] ... value mask: 000000ffffffffff
[ 0.005924] ... max period: 000000007fffffff
[ 0.005993] ... fixed-purpose events: 3
[ 0.006060] ... event mask: 0000000700000003
[ 0.006132] Checking 'hlt' instruction... OK.
[ 0.021258] ACPI: Core revision 20090903
[ 0.035146] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.036460] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076234] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164090] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.164676] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168052] Brought up 2 CPUs
[ 0.168122] Total of 2 processors activated (7999.71 BogoMIPS).
[ 0.168806] CPU0 attaching sched-domain:
[ 0.168810] domain 0: span 0-1 level MC
[ 0.168812] groups: 0 1
[ 0.168818] CPU1 attaching sched-domain:
[ 0.168820] domain 0: span 0-1 level MC
[ 0.168823] groups: 1 0
[ 0.168913] devtmpfs: initialized
[ 0.168913] regulator: core version 0.5
[ 0.168913] NET: Registered protocol family 16
[ 0.168913] ACPI: bus type pci registered
[ 0.168913] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.168913] PCI: MCFG area at e0000000 reserved in E820
[ 0.168913] PCI: Using MMCONFIG for extended config space
[ 0.168913] PCI: Using configuration type 1 for base access
[ 0.168913] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.168913] mtrr: probably your BIOS does not setup all CPUs.
[ 0.168913] mtrr: corrected configuration.
[ 0.169200] bio: create slab <bio-0> at 0
[ 0.172404] ACPI: EC: Look up EC in DSDT
[ 0.183228] ACPI: Interpreter enabled
[ 0.183310] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.183674] ACPI: Using IOAPIC for interrupt routing
[ 0.191827] ACPI: No dock devices found.
[ 0.191993] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.192052] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.192641] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.193792] pci 0000:00:02.0: PME# disabled
[ 0.193925] pci 0000:00:0f.0: reg 10 io port: [0xfc00-0xfc07]
[ 0.193933] pci 0000:00:0f.0: reg 14 io port: [0xf800-0xf803]
[ 0.193941] pci 0000:00:0f.0: reg 18 io port: [0xf400-0xf407]
[ 0.193949] pci 0000:00:0f.0: reg 1c io port: [0xf000-0xf003]
[ 0.193957] pci 0000:00:0f.0: reg 20 io port: [0xec00-0xec0f]
[ 0.193965] pci 0000:00:0f.0: reg 24 io port: [0xe800-0xe8ff]
[ 0.194049] pci 0000:00:0f.1: reg 20 io port: [0xe400-0xe40f]
[ 0.194147] pci 0000:00:10.0: reg 20 io port: [0xe000-0xe01f]
[ 0.194178] pci 0000:00:10.0: supports D1 D2
[ 0.194180] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194253] pci 0000:00:10.0: PME# disabled
[ 0.194377] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.194408] pci 0000:00:10.1: supports D1 D2
[ 0.194410] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194483] pci 0000:00:10.1: PME# disabled
[ 0.194608] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
[ 0.194639] pci 0000:00:10.2: supports D1 D2
[ 0.194642] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194715] pci 0000:00:10.2: PME# disabled
[ 0.194838] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[ 0.194869] pci 0000:00:10.3: supports D1 D2
[ 0.194871] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194945] pci 0000:00:10.3: PME# disabled
[ 0.195047] pci 0000:00:10.4: reg 10 32bit mmio: [0xdffff000-0xdffff0ff]
[ 0.195099] pci 0000:00:10.4: supports D1 D2
[ 0.195101] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195175] pci 0000:00:10.4: PME# disabled
[ 0.195682] pci 0000:02:00.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff]
[ 0.195694] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.195707] pci 0000:02:00.0: reg 1c 64bit mmio: [0xda000000-0xdbffffff]
[ 0.195714] pci 0000:02:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.195722] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xddf80000-0xddffffff]
[ 0.200111] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.200118] pci 0000:00:02.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 0.200128] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.200185] pci 0000:04:01.0: reg 10 64bit mmio: [0xdfefc000-0xdfefffff]
[ 0.200251] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[ 0.200323] pci 0000:04:01.0: PME# disabled
[ 0.200410] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.200541] pci 0000:00:13.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.200588] pci 0000:05:04.0: reg 10 io port: [0xbc00-0xbc1f]
[ 0.200640] pci 0000:05:04.0: supports D1 D2
[ 0.200675] pci 0000:05:04.1: reg 10 io port: [0xb800-0xb807]
[ 0.200726] pci 0000:05:04.1: supports D1 D2
[ 0.200779] pci 0000:05:07.0: reg 10 io port: [0xb400-0xb4ff]
[ 0.200787] pci 0000:05:07.0: reg 14 32bit mmio: [0xdfdff000-0xdfdff0ff]
[ 0.200815] pci 0000:05:07.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.200836] pci 0000:05:07.0: supports D1 D2
[ 0.200838] pci 0000:05:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.200911] pci 0000:05:07.0: PME# disabled
[ 0.201024] pci 0000:00:13.1: transparent bridge
[ 0.201096] pci 0000:00:13.1: bridge io port: [0xb000-0xbfff]
[ 0.201100] pci 0000:00:13.1: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.201127] pci_bus 0000:00: on NUMA node 0
[ 0.201132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.201517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[ 0.201636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 0.201729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.261371] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.262100] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 6 7 10 11 12)
[ 0.262830] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 0.263613] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 0.264338] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
[ 0.265038] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.265855] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.266686] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[ 0.267351] vgaarb: device added:
PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.267435] vgaarb: loaded
[ 0.267537] PCI: Using ACPI for IRQ routing
[ 0.267537] Switching to clocksource tsc
[ 0.267537] pnp: PnP ACPI init
[ 0.267537] ACPI: bus type pnp registered
[ 0.269838] pnp: PnP ACPI: found 15 devices
[ 0.269906] ACPI: ACPI bus type pnp unregistered
[ 0.269977] PnPBIOS: Disabled by ACPI PNP
[ 0.270052] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.270124] system 00:01: ioport range 0x500-0x50f has been reserved
[ 0.270198] system 00:02: iomem range 0x10000000-0x10000fff could not be
reserved
[ 0.270282] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.270353] system 00:03: ioport range 0x290-0x29f has been reserved
[ 0.270427] system 00:03: ioport range 0x800-0x805 has been reserved
[ 0.270499] system 00:03: ioport range 0x880-0x88f has been reserved
[ 0.270575] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.270650] system 00:0e: iomem range 0xcde00-0xcffff has been reserved
[ 0.270722] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.270794] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.270866] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[ 0.270938] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be
reserved
[ 0.271020] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.271092] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.271164] system 00:0e: iomem range 0x100000-0x7fedffff could not be
reserved
[ 0.271245] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.271327] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.271399] system 00:0e: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.306180] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.306250] pci 0000:00:01.0: IO window: disabled
[ 0.306322] pci 0000:00:01.0: MEM window: disabled
[ 0.306394] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.306468] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.306540] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.306613] pci 0000:00:02.0: MEM window: 0xda000000-0xddffffff
[ 0.306686] pci 0000:00:02.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.306772] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[ 0.306842] pci 0000:00:13.0: IO window: disabled
[ 0.306914] pci 0000:00:13.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.306987] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.307062] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[ 0.307133] pci 0000:00:13.1: IO window: 0xb000-0xbfff
[ 0.307206] pci 0000:00:13.1: MEM window: 0xdfd00000-0xdfdfffff
[ 0.307279] pci 0000:00:13.1: PREFETCH window: 0x80000000-0x800fffff
[ 0.307366] pci 0000:00:01.0: setting latency timer to 64
[ 0.307379] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.307452] pci 0000:00:02.0: setting latency timer to 64
[ 0.307459] pci 0000:00:13.0: setting latency timer to 64
[ 0.307466] pci 0000:00:13.1: setting latency timer to 64
[ 0.307471] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.307473] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.307476] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.307479] pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
[ 0.307481] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.307484] pci_bus 0000:04: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.307487] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff]
[ 0.307489] pci_bus 0000:05: resource 1 mem: [0xdfd00000-0xdfdfffff]
[ 0.307492] pci_bus 0000:05: resource 2 pref mem [0x80000000-0x800fffff]
[ 0.307494] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.307496] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[ 0.307524] NET: Registered protocol family 2
[ 0.307673] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.308021] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.308657] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.309027] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.309099] TCP reno registered
[ 0.309252] NET: Registered protocol family 1
[ 0.309345] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.309516] pci 0000:02:00.0: Boot video device
[ 0.309572] Unpacking initramfs...
[ 0.571398] Freeing initrd memory: 9181k freed
[ 0.577227] audit: initializing netlink socket (disabled)
[ 0.577322] type=2000 audit(1270929156.576:1): initialized
[ 0.577659] highmem bounce pool size: 64 pages
[ 0.577731] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.579163] VFS: Disk quotas dquot_6.5.2
[ 0.579290] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.579439] msgmni has been set to 1723
[ 0.579719] alg: No test for stdrng (krng)
[ 0.579834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.579916] io scheduler noop registered
[ 0.579984] io scheduler anticipatory registered
[ 0.580052] io scheduler deadline registered
[ 0.580188] io scheduler cfq registered (default)
[ 0.580438] pcieport 0000:00:02.0: irq 48 for MSI/MSI-X
[ 0.580449] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.580588] aer 0000:00:02.0:pcie02: AER service couldn't init device: no
_OSC support
[ 0.580672] isapnp: Scanning for PnP cards...
[ 0.934774] isapnp: No Plug & Play device found
[ 0.936074] Linux agpgart interface v0.103
[ 0.936262] agpgart: Detected VIA P4M890 chipset
[ 0.942520] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.942613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.942780] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.943204] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.943449] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 0.947149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.947221] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.947340] mice: PS/2 mouse device common for all mice
[ 0.947449] rtc_cmos 00:05: RTC can wake from S4
[ 0.947548] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.947669] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.947748] cpuidle: using governor ladder
[ 0.947816] cpuidle: using governor menu
[ 0.947886] No iBFT detected.
[ 0.948288] TCP cubic registered
[ 0.948486] NET: Registered protocol family 10
[ 0.948972] lo: Disabled Privacy Extensions
[ 0.949336] Mobile IPv6
[ 0.949403] NET: Registered protocol family 17
[ 0.949487] Using IPI No-Shortcut mode
[ 0.949610] PM: Resume from disk failed.
[ 0.949616] registered taskstats version 1
[ 0.950122] rtc_cmos 00:05: setting system clock to 2010-04-10 19:52:37 UTC
(1270929157)
[ 0.950242] Freeing unused kernel memory: 372k freed
[ 0.950465] Write protecting the kernel text: 2472k
[ 0.950554] Write protecting the kernel read-only data: 912k
[ 0.975716] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 1.058156] device-mapper: uevent: version 1.0.3
[ 1.058342] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 1.078480] fan PNP0C0B:00: registered as cooling_device0
[ 1.078565] ACPI: Fan [FAN] (on)
[ 1.081762] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.081839] ACPI: Thermal Zone [THRM] (40 C)
[ 1.198893] SCSI subsystem initialized
[ 1.209023] usbcore: registered new interface driver usbfs
[ 1.209188] usbcore: registered new interface driver hub
[ 1.209354] usbcore: registered new device driver usb
[ 1.209899] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.209992] ACPI: Power Button [PWRB]
[ 1.210111] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.210198] ACPI: Sleep Button [SLPB]
[ 1.210334] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.210416] ACPI: Power Button [PWRF]
[ 1.211800] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.211918] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.212017] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 1.212113] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 1.212251] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
[ 1.224509] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 1.224607] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.224678] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.224759] usb usb1: Product: EHCI Host Controller
[ 1.224828] usb usb1: Manufacturer: Linux 2.6.32-4-686 ehci_hcd
[ 1.224899] usb usb1: SerialNumber: 0000:00:10.4
[ 1.225056] usb usb1: configuration #1 chosen from 1 choice
[ 1.225153] hub 1-0:1.0: USB hub found
[ 1.225227] hub 1-0:1.0: 8 ports detected
[ 1.228601] libata version 3.00 loaded.
[ 1.230405] pata_via 0000:00:0f.1: version 0.3.4
[ 1.230594] scsi0 : pata_via
[ 1.230798] scsi1 : pata_via
[ 1.232293] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.232480] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.232483] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.235087] Floppy drive(s): fd0 is 1.44M
[ 1.235364] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.235529] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.235676] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 1.235902] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 1.236089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.236216] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.236312] usb usb2: Product: UHCI Host Controller
[ 1.236385] usb usb2: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.236456] usb usb2: SerialNumber: 0000:00:10.0
[ 1.236614] usb usb2: configuration #1 chosen from 1 choice
[ 1.236710] hub 2-0:1.0: USB hub found
[ 1.236783] hub 2-0:1.0: 2 ports detected
[ 1.236901] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.236979] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.237057] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 1.237177] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
[ 1.237273] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.237345] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.237425] usb usb3: Product: UHCI Host Controller
[ 1.237494] usb usb3: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.237564] usb usb3: SerialNumber: 0000:00:10.1
[ 1.237688] usb usb3: configuration #1 chosen from 1 choice
[ 1.237781] hub 3-0:1.0: USB hub found
[ 1.237853] hub 3-0:1.0: 2 ports detected
[ 1.237964] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.238040] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.238118] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 1.238293] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 1.238391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.238464] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.238547] usb usb4: Product: UHCI Host Controller
[ 1.238618] usb usb4: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.238690] usb usb4: SerialNumber: 0000:00:10.2
[ 1.238831] usb usb4: configuration #1 chosen from 1 choice
[ 1.238929] hub 4-0:1.0: USB hub found
[ 1.239003] hub 4-0:1.0: 2 ports detected
[ 1.239163] sata_via 0000:00:0f.0: version 2.4
[ 1.239178] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.239287] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.240536] scsi2 : sata_via
[ 1.240708] scsi3 : sata_via
[ 1.242268] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 1.242342] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 1.242460] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.242541] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 1.242623] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 1.242747] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
[ 1.242848] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.242920] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.243000] usb usb5: Product: UHCI Host Controller
[ 1.243069] usb usb5: Manufacturer: Linux 2.6.32-4-686 uhci_hcd
[ 1.243140] usb usb5: SerialNumber: 0000:00:10.3
[ 1.243277] usb usb5: configuration #1 chosen from 1 choice
[ 1.243377] hub 5-0:1.0: USB hub found
[ 1.243450] hub 5-0:1.0: 2 ports detected
[ 1.252408] FDC 0 is a post-1991 82077
[ 1.444061] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.584435] ata2.00: ATAPI: _NEC DVD_RW ND-1300A, 1.06, max UDMA/33
[ 1.584539] ata2.01: ATAPI: TOSHIBA ODD-DVD SD-M1802, 1031, max UDMA/33
[ 1.600314] ata2.00: configured for UDMA/33
[ 1.632306] ata2.01: configured for UDMA/33
[ 1.635963] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.06
PQ: 0 ANSI: 5
[ 1.636912] scsi 1:0:1:0: CD-ROM TOSHIBA ODD-DVD SD-M1802 1031
PQ: 0 ANSI: 5
[ 1.840508] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.004391] ata4.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 2.004468] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.020397] ata4.00: configured for UDMA/133
[ 2.020579] scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03
PQ: 0 ANSI: 5
[ 2.022973] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.023064] r8169 0000:05:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.023160] r8169 0000:05:07.0: no PCI Express capability
[ 2.023817] eth0: RTL8169sc/8110sc at 0xf7e9c000, 00:18:f3:bc:46:44, XID
18000000 IRQ 20
[ 2.030631] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232
GiB)
[ 2.030757] sd 3:0:0:0: [sda] Write Protect is off
[ 2.030828] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.030851] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.031053] sda:sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda
tray
[ 2.041627] Uniform CD-ROM driver Revision: 3.20
[ 2.041809] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.045921] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.046114] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.052831] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.110812] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.117669] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.118039] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 2.118701] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.620538] PM: Starting manual resume from disk
[ 2.620609] PM: Resume from partition 8:2
[ 2.620611] PM: Checking hibernation image.
[ 2.620797] PM: Error -22 checking image file
[ 2.620800] PM: Resume from disk failed.
[ 2.626332] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.626338] PM: Basic memory bitmaps created
[ 2.634245] PM: Basic memory bitmaps freed
[ 2.685989] kjournald starting. Commit interval 5 seconds
[ 2.686074] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.792404] udev: starting version 151
[ 5.248479] processor LNXCPU:00: registered as cooling_device1
[ 5.249345] ACPI: SSDT 7feeac40 00087 (v01 AWARD Cpu1Ist 00003000 INTL
20040311)
[ 5.249783] processor LNXCPU:01: registered as cooling_device2
[ 5.263027] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.273710] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.273855] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 5.558036] udev: renamed network interface eth0 to eth1
[ 5.798382] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.017908] input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input5
[ 6.078086] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.104382] gameport: EMU10K1 is pci0000:05:04.1/gameport0, io 0xb800, speed
1065kHz
[ 6.732766] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ
17
[ 6.732898] HDA Intel 0000:04:01.0: setting latency timer to 64
[ 6.732902] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
[ 6.790676] EMU10K1_Audigy 0000:05:04.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 6.881522] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:13.0/0000:04:01.0/input/input6
[ 8.178448] Adding 2104504k swap on /dev/sda2. Priority:-1 extents:1
across:2104504k
[ 8.470040] EXT3 FS on sda1, internal journal
[ 8.611364] loop: module loaded
[ 8.674106] coretemp coretemp.0: Using relative temperature scale!
[ 8.674460] coretemp coretemp.1: Using relative temperature scale!
[ 9.232695] fuse init (API version 7.13)
[ 9.467626] kjournald starting. Commit interval 5 seconds
[ 9.467958] EXT3 FS on sda5, internal journal
[ 9.468091] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.243979] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.259303] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 11.259564] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 11.259645] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 11.259726] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 34.286373] hda-intel: IRQ timing workaround is activated for card #0.
Suggest a bigger bdl_pos_adj.
[ 62.432199] Bluetooth: Core ver 2.15
[ 62.432344] NET: Registered protocol family 31
[ 62.432421] Bluetooth: HCI device and connection manager initialized
[ 62.432498] Bluetooth: HCI socket layer initialized
[ 62.532061] Bluetooth: L2CAP ver 2.14
[ 62.532138] Bluetooth: L2CAP socket layer initialized
[ 62.577557] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 62.577636] Bluetooth: BNEP filters: protocol multicast
[ 62.648372] Bluetooth: RFCOMM TTY layer initialized
[ 62.648452] Bluetooth: RFCOMM socket layer initialized
[ 62.648536] Bluetooth: RFCOMM ver 1.11
[ 62.689818] Bridge firewalling registered
[ 62.746352] Bluetooth: SCO (Voice Link) ver 0.6
[ 62.746442] Bluetooth: SCO socket layer initialized
[ 63.604114] r8169: eth1: link up
[ 64.444203] lp0: using parport0 (interrupt-driven).
[ 64.455292] ppdev: user-space parallel port driver
[ 73.936007] eth1: no IPv6 routers present
[ 237.987620] RPC: Registered udp transport module.
[ 237.987713] RPC: Registered tcp transport module.
[ 237.987791] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 238.049027] Slow work thread pool: Starting up
[ 238.049405] Slow work thread pool: Ready
[ 238.049539] FS-Cache: Loaded
[ 238.088583] FS-Cache: Netfs 'nfs' registered for caching
[ 238.097644] svc: failed to register lockdv1 RPC service (errno 97).
[ 353.738485] nvidia: module license 'NVIDIA' taints kernel.
[ 353.738490] Disabling lock debugging due to kernel taint
[ 354.749714] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 354.749724] nvidia 0000:02:00.0: setting latency timer to 64
[ 354.749729] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 354.749953] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar
11 21:41:46 PST 2010
[ 443.997366] nvidia 0000:02:00.0: setting latency timer to 64
[ 443.997377] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=none,decodes=none:owns=io+mem
[ 443.998131] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar
11 21:41:46 PST 2010
[ 458.999566] CPU0 attaching NULL sched-domain.
[ 458.999573] CPU1 attaching NULL sched-domain.
[ 459.028091] CPU0 attaching sched-domain:
[ 459.028095] domain 0: span 0-1 level MC
[ 459.028098] groups: 0 1
[ 459.028103] CPU1 attaching sched-domain:
[ 459.028105] domain 0: span 0-1 level MC
[ 459.028108] groups: 1 0
[ 465.072031] end_request: I/O error, dev fd0, sector 0
[ 465.104025] end_request: I/O error, dev fd0, sector 0
** Model information
not available
** Loaded modules:
Module Size Used by
nvidia 9791992 28
nfs 206674 1
lockd 49437 1 nfs
fscache 24662 1 nfs
nfs_acl 1695 1 nfs
auth_rpcgss 25240 1 nfs
sunrpc 134630 11 nfs,lockd,nfs_acl,auth_rpcgss
binfmt_misc 4907 1
ppdev 4058 0
lp 5570 0
sco 5857 2
bridge 32987 0
stp 996 1 bridge
rfcomm 25167 0
bnep 7444 2
l2cap 21705 4 rfcomm,bnep
crc16 1027 1 l2cap
bluetooth 36327 6 sco,rfcomm,bnep,l2cap
rfkill 10264 2 bluetooth
battery 3782 0
acpi_cpufreq 4943 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_powersave 602 0
cpufreq_stats 1940 0
ipt_LOG 3570 1
xt_limit 1088 1
xt_state 927 1
iptable_filter 1790 1
iptable_mangle 2325 0
iptable_nat 3551 0
nf_nat 10568 1 iptable_nat
nf_conntrack_ipv4 7597 4 iptable_nat,nf_nat
nf_conntrack 38067 4 xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
ip_tables 7690 3 iptable_filter,iptable_mangle,iptable_nat
x_tables 8327 5 ipt_LOG,xt_limit,xt_state,iptable_nat,ip_tables
fuse 43758 1
dm_snapshot 18021 0
coretemp 3281 0
hwmon_vid 1528 0
loop 9757 0
snd_emu10k1_synth 4024 0
snd_emux_synth 21890 1 snd_emu10k1_synth
snd_seq_virmidi 2955 1 snd_emux_synth
snd_seq_midi_emul 3554 1 snd_emux_synth
snd_hda_codec_realtek 163166 1
snd_emu10k1 104712 1 snd_emu10k1_synth
snd_hda_intel 16595 4
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_ac97_codec 79148 1 snd_emu10k1
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_util_mem 1548 2 snd_emux_synth,snd_emu10k1
snd_hwdep 4054 3 snd_emux_synth,snd_emu10k1,snd_hda_codec
snd_mixer_oss 10461 1 snd_pcm_oss
snd_seq_midi 3576 0
snd_pcm 47210 6
snd_emu10k1,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_pcm_oss
snd_rawmidi 12505 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_page_alloc 5045 3 snd_emu10k1,snd_hda_intel,snd_pcm
snd_seq_midi_event 3684 2 snd_seq_virmidi,snd_seq_midi
emu10k1_gp 1238 0
snd_seq 35463 6
snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
i2c_viapro 4419 0
shpchp 21220 0
gameport 6061 2 emu10k1_gp
i2c_core 12648 2 nvidia,i2c_viapro
pci_hotplug 18065 1 shpchp
snd_timer 12258 4 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 3673 5
snd_emu10k1_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 22
snd_emux_synth,snd_seq_virmidi,snd_hda_codec_realtek,snd_emu10k1,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_pcm_oss,snd_hwdep,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
asus_atk0110 6770 0
parport_pc 15799 1
serio_raw 2916 0
pcspkr 1207 0
parport 22554 3 ppdev,lp,parport_pc
processor 26599 1 acpi_cpufreq
psmouse 44421 0
evdev 5609 13
ext3 94200 2
jbd 32169 1 ext3
mbcache 3762 1 ext3
sg 15964 0
sr_mod 10770 0
cdrom 26487 1 sr_mod
sd_mod 25785 4
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
r8169 24788 0
sata_via 5473 3
floppy 40923 0
mii 2714 1 r8169
uhci_hcd 16057 0
pata_via 5669 0
libata 114416 3 ata_generic,sata_via,pata_via
ehci_hcd 27622 0
button 3598 0
usbcore 98302 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
scsi_mod 101305 4 sg,sr_mod,sd_mod,libata
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
dm_mirror 9671 0
dm_region_hash 5644 1 dm_mirror
dm_log 6369 2 dm_mirror,dm_region_hash
dm_mod 46078 3 dm_snapshot,dm_mirror,dm_log
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:0327]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ce]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled]
[size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:00.1 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:1327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:2327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:3327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:4327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.5 PIC [0800]: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
[1106:5327] (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
00:00.6 Host bridge [0600]: VIA Technologies, Inc. P4M890 Security Device
[1106:6327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
00:00.7 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge
[1106:7327]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
[1106:b198] (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge
Controller [1106:a327] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: da000000-ddffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT8237A SATA 2-Port
Controller [1106:0591] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: I/O ports at e800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81cf]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev a0) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
86) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
[1106:3337]
Subsystem: ASUSTeK Computer Inc. Device [1043:81cf]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK
Controller [1106:287e]
Subsystem: VIA Technologies, Inc. Device [1106:337e]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237A Host Bridge
[1106:337b] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: dfe00000-dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
[1106:337a] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dfd00000-dfdfffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500
GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at ddf80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
04:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA
High Definition Audio Controller) [1106:3288] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at dfefc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
05:04.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1
[1102:0002] (rev 08)
Subsystem: Creative Labs CT4832 SBLive! Value [1102:8027]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
05:04.1 Input device controller [0980]: Creative Labs SB Live! Game Port
[1102:7002] (rev 08)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at b800 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
05:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit
Ethernet [10ec:8167]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at dfdff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-4-686 depends on:
ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-11 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-4-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-4-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-4-686 depends on:
ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-11 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-686 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-4-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true
--- End Message ---
