--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-21
Severity: important
Hi,
After several hours or days of running aircrack-ng (in this instance
only 90 minutes) on a USB rtl8187 wlan interface, a strange kind of
kernel lockup happens. Many processes hang, I think when they attempt
some kind of disk I/O. I remember having a similar issue in 2.6.26
kernels, too, on the same system.
Other symptoms include:
* local keyboard numlock won't toggle any more
* local console won't come out of standby blank mode
* Sys-RQ key triggers actions, but I don't think sync or remount
completed:
[12520.844715] Emergency Sync
[12524.975946] Emergency Sync
[12527.911438] Emergency Sync
[12531.661771] Emergency Remount R/O
[12537.376854] Emergency Sync
I wouldn't expect a sync to take more than 2-5 seconds on this system.
Filesystems were not clean on reboot, so fsck.reiserfs was run and it
replayed journal transactions. Please upgrade the Severity if that
seems to justify it. Confusingly though, the messages above were in
kern.log after reboot, so they were written to disk, at least. /var/log
has its own local partition, but still on the same MD device and disks
as everything else.
Also:
* network interface still responds to ping; NAT, iptables and bridges
all working normally
* SSH on the host responds with the OpenSSH greeting, but login hangs
after authentication, without showing the motd or shell
* OpenVZ VE's on the machine still continue to serve web, SMB shares,
and mail just fine
* SSH into a VE displays the motd, but locks up before the shell prompt
* serial login prompt (getty) stopped responding (won't even echo back
characters)
* serial console (via onboard BMC) still shows kernel messages as
they're being generated, including this (repeating every 2 minutes):
[ 9001.613530] INFO: task events/3:18 blocked for more than 120 seconds.
[ 9001.620364] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[ 9001.628766] events/3 D ffff88007f87a000 0 18 2
0x00000000
[ 9001.636088] ffff88007f8e9000 0000000000000046 00000001002068c9
ffffffff812e7ccc
[ 9001.644090] 0000000000000000 000000000000fa40 ffff88007f88dfd8
0000000000016940
[ 9001.652120] 0000000000016940 ffff88007f87a000 ffff88007f87a2f8
000000037f935800
[ 9001.660178] Call Trace:
[ 9001.662862] [<ffffffff812e7ccc>] ? schedule_timeout+0xad/0xdd
[ 9001.669046] [<ffffffffa0176eb9>] ? ohci_urb_dequeue+0xd9/0xe9 [ohci_hcd]
[ 9001.676253] [<ffffffffa00a10d8>] ? usb_kill_urb+0x9d/0xbb [usbcore]
[ 9001.683018] [<ffffffff81065422>] ? autoremove_wake_function+0x0/0x2e
[ 9001.689847] [<ffffffffa00a2406>] ? usb_start_wait_urb+0x7e/0xb7
[usbcore]
[ 9001.697128] [<ffffffffa00a267c>] ? usb_control_msg+0x112/0x135 [usbcore]
[ 9001.704315] [<ffffffff810468b3>] ? finish_task_switch+0x3a/0xaf
[ 9001.710714] [<ffffffffa03f3d2e>] ? rtl818x_ioread8+0x61/0x7e [rtl8187]
[ 9001.717737] [<ffffffffa03f3d6f>] ?
rtl8187_is_radio_enabled+0x24/0xc0 [rtl8187]
[ 9001.725642] [<ffffffffa03f3e30>] ? rtl8187_rfkill_poll+0x25/0x78
[rtl8187]
[ 9001.733036] [<ffffffffa0217e5d>] ? rfkill_poll+0x1b/0x31 [rfkill]
[ 9001.739616] [<ffffffff81061952>] ? worker_thread+0x188/0x21d
[ 9001.745732] [<ffffffffa0217e42>] ? rfkill_poll+0x0/0x31 [rfkill]
[ 9001.752209] [<ffffffff81065422>] ? autoremove_wake_function+0x0/0x2e
[ 9001.759049] [<ffffffff810617ca>] ? worker_thread+0x0/0x21d
[ 9001.764955] [<ffffffff81065156>] ? kthread+0xc0/0xca
[ 9001.770341] [<ffffffff81011c6a>] ? child_rip+0xa/0x20
[ 9001.775816] [<ffffffff81065096>] ? kthread+0x0/0xca
[ 9001.781131] [<ffffffff81011c60>] ? child_rip+0x0/0x20
I haven't been able to figure out yet what the events/3:18 kernel
process is. There were no other errors in dmesg leading up to this.
Physically unplugging the device didn't help anything to 'un-freeze'.
This is the offending USB device:
[ 442.000041] usb 1-1: New USB device found, idVendor=0bda, idProduct=8187
[ 442.007311] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 442.014978] usb 1-1: Product: RTL8187_Wireless_LAN_Adapter
[ 442.020937] usb 1-1: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 442.027433] usb 1-1: SerialNumber: 00C0CA271F85
[ 442.033357] usb 1-1: configuration #1 chosen from 1 choice
[ 442.432489] cfg80211: Using static regulatory domain info
[ 442.438259] cfg80211: Regulatory domain: US
[ 442.442734] (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 442.459926] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi,
2700 mBm)
[ 442.467125] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 442.474361] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 442.481566] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 442.488768] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi,
2300 mBm)
[ 442.496015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi,
3000 mBm)
[ 442.517380] cfg80211: Calling CRDA for country: US
[ 446.347676] phy0: Selected rate control algorithm 'minstrel'
[ 446.348835] phy0: hwaddr 00:c0:ca:27:1f:85, RTL8187vB (default) V1 +
rtl8225z2, rfkill mask 2
[ 446.615341] rtl8187: Customer ID is 0xFF
[ 446.619988] Registered led device: rtl8187-phy0::tx
[ 446.625597] Registered led device: rtl8187-phy0::rx
-- Package-specific info:
** Version:
Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-21)
(b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Wed
Aug 25 14:41:25 UTC 2010
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64
root=/dev/mapper/guisborough--1-root ro console=tty0
console=ttyS0,115200n8 clock=hpet rootdelay=5
** Not tainted
** Model information
sys_vendor: Sun Microsystems
product_name: Sun Fire V20z
product_version: 00
chassis_vendor: NEWISYS
chassis_version:
bios_vendor: Phoenix Technologies Ltd.
bios_version: V1.35.5.1
board_vendor: NEWISYS
board_name: Stinger
board_version: r09
** Loaded modules:
Module Size Used by
arc4 1274 2
ecb 1841 2
rtl8187 29050 0
mac80211 137004 1 rtl8187
led_class 2433 1 rtl8187
cfg80211 101544 2 rtl8187,mac80211
rfkill 13060 1 cfg80211
eeprom_93cx6 1335 1 rtl8187
vzethdev 7301 0
vznetdev 17967 14
simfs 3087 7
vzrst 110286 0
vzcpt 97010 0
vzdquota 35158 7 [permanent]
vzmon 16333 11 vzethdev,vznetdev,vzrst,vzcpt
vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon
xt_DSCP 2453 0
xt_owner 1909 0
xt_length 1164 0
xt_hl 1313 0
xt_tcpmss 1401 0
xt_TCPMSS 2935 0
xt_limit 1782 0
xt_dscp 1805 0
nfsd 255142 13
exportfs 3330 1 nfsd
nfs 243882 0
lockd 58772 2 nfsd,nfs
fscache 29850 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33460 2 nfsd,nfs
sunrpc 164397 11 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 40726 0
ipt_MASQUERADE 1213 5
iptable_nat 4363 1
nf_nat 13514 2 ipt_MASQUERADE,iptable_nat
iptable_mangle 2881 0
ipt_REJECT 1953 6
ipt_LOG 4742 12
xt_tcpudp 2319 27
act_police 3636 3
nf_conntrack_ipv4 10143 13 iptable_nat,nf_nat
nf_defrag_ipv4 1155 1 nf_conntrack_ipv4
cls_u32 5466 4
xt_state 1303 10
sch_ingress 1624 1
nf_conntrack 47155 4
iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
sch_htb 11942 1
xt_hashlimit 8503 2
xt_multiport 2267 9
iptable_filter 2322 1
ip_tables 14107 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 13213 17
xt_DSCP,xt_owner,xt_length,xt_hl,xt_tcpmss,xt_TCPMSS,xt_limit,xt_dscp,ipt_MASQUERADE,iptable_nat,ipt_REJECT,ipt_LOG,xt_tcpudp,xt_state,xt_hashlimit,xt_multiport,ip_tables
8021q 17902 0
garp 5050 1 8021q
stp 1440 2 bridge,garp
powernow_k8 10978 2
ipmi_watchdog 12753 0
ipmi_si 30976 1
ipmi_devintf 6603 0
ipmi_msghandler 26634 3 ipmi_watchdog,ipmi_si,ipmi_devintf
loop 11751 0
container 2389 0
psmouse 49777 0
snd_pcm 60487 0
snd_timer 15598 1 snd_pcm
serio_raw 3768 0
evdev 7368 0
amd64_edac_mod 13646 0
snd 46494 2 snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6265 1 snd_pcm
k8temp 3155 0
edac_core 29245 4 amd64_edac_mod
edac_mce_amd 6433 1 amd64_edac_mod
button 4682 0
processor 30351 1 powernow_k8
pcspkr 1699 0
i2c_amd756 4321 0
i2c_core 15712 1 i2c_amd756
amd_rng 1437 0
rng_core 3006 2 amd_rng
shpchp 26264 0
pci_hotplug 21219 1 shpchp
reiserfs 194036 7
sha256_generic 8692 2
aes_x86_64 7340 2
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10507 1
dm_mirror 10923 0
dm_region_hash 6680 1 dm_mirror
dm_log 7381 2 dm_mirror,dm_region_hash
dm_snapshot 18481 0
dm_mod 53802 29 dm_crypt,dm_mirror,dm_log,dm_snapshot
raid456 44500 1
async_raid6_recov 5106 1 raid456
async_pq 3431 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2446 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1182 2 raid456,async_raid6_recov
async_tx 1750 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 18319 1
md_mod 73632 4 raid456,raid1
osst 45205 0
st 30836 2
sd_mod 29745 15
crc_t10dif 1276 1 sd_mod
sg 18712 0
sr_mod 12682 0
cdrom 29415 1 sr_mod
ata_generic 2983 0
mptspi 11185 0
mptscsih 16312 1 mptspi
pata_amd 9869 0
qla2xxx 203093 10
scsi_transport_fc 35355 1 qla2xxx
ohci_hcd 19228 0
mptbase 48366 2 mptspi,mptscsih
aic7xxx 107123 1
scsi_transport_spi 18774 2 mptspi,aic7xxx
scsi_tgt 8498 1 scsi_transport_fc
floppy 49055 0
tg3 95663 0
libata 133536 2 ata_generic,pata_amd
usbcore 122114 3 rtl8187,ohci_hcd
nls_base 6377 1 usbcore
libphy 14054 1 tg3
scsi_mod 122133 13
osst,st,sd_mod,sg,sr_mod,mptspi,mptscsih,qla2xxx,scsi_transport_fc,aic7xxx,scsi_transport_spi,scsi_tgt,libata
thermal 11754 0
fan 3362 0
thermal_sys 11942 3 processor,thermal,fan
** PCI devices:
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI
[1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 123
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
Memory behind bridge: fc900000-fdffffff
Prefetchable memory behind bridge: c0000000-c00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC
[1022:7468] (rev 05)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE
[1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1000 [size=16]
Kernel driver in use: pata_amd
Kernel modules: pata_amd, ata_generic
00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI
[1022:746b] (rev 05)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd756_smbus
Kernel modules: i2c-amd756, amd-rng
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe000000-fe0fffff
Prefetchable memory behind bridge: 00000000c0100000-00000000c02fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc800000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 00000000c0300000-00000000c03fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc801000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc900000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc901000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:05.0 VGA compatible controller [0300]: Trident Microsystems Blade 3D
PCI/AGP [1023:9880] (rev 3a) (prog-if 00 [VGA controller])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at fc920000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at c0000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: tridentfb
02:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fe010000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fe000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:02.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fe030000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fe020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:04.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at fe050000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at fe040000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptspi
Kernel modules: mptspi
02:05.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
BIST result: 00
Region 0: I/O ports at 2400 [disabled] [size=256]
Region 1: Memory at fe060000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c0200000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
02:05.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
BIST result: 00
Region 0: I/O ports at 2800 [disabled] [size=256]
Region 1: Memory at fe061000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c0220000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
03:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre
Channel to PCI-X HBA [1077:2312] (rev 02)
Subsystem: QLogic Corp. Device [1077:0101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at fe100000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c0300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
03:01.1 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre
Channel to PCI-X HBA [1077:2312] (rev 02)
Subsystem: QLogic Corp. Device [1077:0101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at fe101000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c0320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
** USB devices:
not available
-- System Information:
Debian Release: 5.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an
initramfs
ii linux-base 2.6.32-21 Linux image base package
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
ii vzctl 3.0.22-14 server virtualization
solution - c
Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends:
ii firmware-linux-free 2.6.32-20~bpo50+1 Binary firmware for various
driver
Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader,
version
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
ii firmware-qlogic 0.24~bpo50+1 Binary firmware for QLogic
IBA7220
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-openvz-amd64/postinst/ignoring-do-bootloader-2.6.32-5-openvz-amd64:
linux-image-2.6.32-5-openvz-amd64/postinst/missing-firmware-2.6.32-5-openvz-amd64:
linux-image-2.6.32-5-openvz-amd64/postinst/depmod-error-initrd-2.6.32-5-openvz-amd64:
false
linux-image-2.6.32-5-openvz-amd64/prerm/removing-running-kernel-2.6.32-5-openvz-amd64:
true
Thanks,
Regards,
--
Steven Chamberlain
ste...@pyro.eu.org
--- End Message ---
