Package: kernel-image-2.6.8-2-k7
Version: 2.6.8-16
The powernow-k7 module fails to load into kernel 2.6.8-2-k7 running on
an Athlon Mobile processor.
Example:
--------
# depmod
# modprobe powernow-k7
FATAL: Error inserting powernow_k7
(/lib/modules/2.6.8-2-k7/kernel/arch/i386/kernel/cpu/cpufreq/powernow-k7.ko):
No such device
It seems as though the module is aborting because ACPI is broken on my
machine. From what I understand, powernow and the associated CPUFreq
subsystem in the 2.6 kernel are independent of ACPI and should
function properly without it. I am running a Athlon Mobile (Barton
core) on a Shuttle SK41G XPC. The Shuttle SK41G uses the VIA KM266
chipset.
Debian bug #252429 reported a similar problem against kernel 2.6.6-1.
dmesg output
------------
Linux version 2.6.8-2-k7 ([EMAIL PROTECTED]) (gcc
version 3.3.5 (Debian 1:3.3.5-12)) #1 Thu May 19 18:03:29 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 KM266 ) @ 0x000f7140
ACPI: RSDT (v001 KM266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 KM266 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 KM266 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2002.754 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511412k/524224k available (1536k kernel code, 12036k reserved,
697k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3964.92 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Mobile AMD Athl stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2002.0084 MHz.
..... host bus clock speed is 266.0944 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4468k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
spurious 8259A interrupt: IRQ7.
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc080
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc0b0, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4468 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 10 (level, low) -> IRQ 10
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:pio
hda: SAMSUNG SP1614N, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: ATAPI DVD+RW 8X4X12, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 787176k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PS/2 Generic Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <[EMAIL PROTECTED]>
Capability LSM initialized
ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]
MMIO=[ee001000-ee0017ff] Max Packet=[2048]
irda_init()
NET: Registered protocol family 23
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xd000, 00:30:1b:ab:ed:36, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0000d800
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)
uhci_hcd 0000:00:10.1: irq 11, io base 0000dc00
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#3)
uhci_hcd 0000:00:10.2: irq 11, io base 0000e000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bab0000ed9a]
ip1394: $Rev: 1224 $ Ben Collins <[EMAIL PROTECTED]>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
usb 1-2: new full speed USB device using address 2
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 5, pci mem e0a6b000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 1-2: unable to read config index 0 descriptor/start
usb 1-2: can't read configurations, error -84
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA PM266/KM266 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
usb 1-2: new full speed USB device using address 4
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new driver hiddev
input: USB HID v1.00 Device [Labtec Labtec USB Speaker System] on
usb-0000:00:10.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
USB Audio: using volume control quirk for the UDA1321/N101 chip
usbcore: registered new driver snd-usb-audio
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
Real Time Clock Driver v1.12
input: PC Speaker
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fc1a0(lo)
IPv6 over IPv4 tunneling driver
drivers/usb/input/hid-input.c: event field not found
eth0: no IPv6 routers present
usb 1-2: control timeout on ep0in
usb 1-2: USB disconnect, address 4
usb 1-2: new full speed USB device using address 5
USB Audio: using volume control quirk for the UDA1321/N101 chip
input: USB HID v1.00 Device [Labtec Labtec USB Speaker System] on
usb-0000:00:10.0-2
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
usb 1-2: control timeout on ep0in
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 133.516 MHz
powernow: Trying ACPI perflib
powernow: ACPI perflib can not be used in this platform
powernow: ACPI and legacy methods failed
powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 133.516 MHz
powernow: Trying ACPI perflib
powernow: ACPI perflib can not be used in this platform
powernow: ACPI and legacy methods failed
powernow: See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml
/var/log/messages:
------------------
Aug 31 15:26:43 localhost syslogd 1.4.1#17: restart.
Aug 31 15:26:43 localhost kernel: klogd 1.4.1#17, log source =
/proc/kmsg started.
Aug 31 15:26:43 localhost kernel: Inspecting /boot/System.map-2.6.8-2-k7
Aug 31 15:26:43 localhost kernel: Loaded 27412 symbols from
/boot/System.map-2.6.8-2-k7.
Aug 31 15:26:43 localhost kernel: Symbols match kernel version 2.6.8.
Aug 31 15:26:43 localhost kernel: No module symbols loaded - kernel
modules not enabled.
Aug 31 15:26:43 localhost kernel: Linux version 2.6.8-2-k7
([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-12)) #1 Thu May 19 18:03:29 JST 2005
Aug 31 15:26:43 localhost kernel: BIOS-provided physical RAM map:
Aug 31 15:26:43 localhost kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 00000000000f0000 -
0000000000100000 (reserved)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 0000000000100000 -
000000001fff0000 (usable)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 000000001fff0000 -
000000001fff3000 (ACPI NVS)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 000000001fff3000 -
0000000020000000 (ACPI data)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Aug 31 15:26:43 localhost kernel: BIOS-e820: 00000000ffff0000 -
0000000100000000 (reserved)
Aug 31 15:26:43 localhost kernel: 0MB HIGHMEM available.
Aug 31 15:26:43 localhost kernel: 511MB LOWMEM available.
Aug 31 15:26:43 localhost kernel: DMI 2.2 present.
Aug 31 15:26:43 localhost kernel: ACPI: RSDP (v000 KM266
) @ 0x000f7140
Aug 31 15:26:43 localhost kernel: ACPI: RSDT (v001 KM266 AWRDACPI
0x42302e31 AWRD 0x00000000) @ 0x1fff3000
Aug 31 15:26:43 localhost kernel: ACPI: FADT (v001 KM266 AWRDACPI
0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Aug 31 15:26:43 localhost kernel: ACPI: DSDT (v001 KM266 AWRDACPI
0x00001000 MSFT 0x0100000d) @ 0x00000000
Aug 31 15:26:43 localhost kernel: ACPI: PM-Timer IO Port: 0x4008
Aug 31 15:26:43 localhost kernel: Built 1 zonelists
Aug 31 15:26:43 localhost kernel: Kernel command line: root=/dev/hda3 ro
Aug 31 15:26:43 localhost kernel: Found and enabled local APIC!
Aug 31 15:26:43 localhost kernel: Initializing CPU#0
Aug 31 15:26:43 localhost kernel: PID hash table entries: 2048 (order
11: 16384 bytes)
Aug 31 15:26:43 localhost kernel: Detected 2002.754 MHz processor.
Aug 31 15:26:43 localhost kernel: Using pmtmr for high-res timesource
Aug 31 15:26:43 localhost kernel: Console: colour VGA+ 80x25
Aug 31 15:26:43 localhost kernel: Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
Aug 31 15:26:43 localhost kernel: Inode-cache hash table entries:
65536 (order: 6, 262144 bytes)
Aug 31 15:26:43 localhost kernel: Memory: 511412k/524224k available
(1536k kernel code, 12036k reserved, 697k data, 148k init, 0k highmem)
Aug 31 15:26:43 localhost kernel: Checking if this processor honours
the WP bit even in supervisor mode... Ok.
Aug 31 15:26:43 localhost kernel: Calibrating delay loop... 3964.92 BogoMIPS
Aug 31 15:26:43 localhost kernel: Security Scaffold v1.0.0 initialized
Aug 31 15:26:43 localhost kernel: Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
Aug 31 15:26:43 localhost kernel: CPU: L1 I Cache: 64K (64
bytes/line), D cache 64K (64 bytes/line)
Aug 31 15:26:43 localhost kernel: CPU: L2 Cache: 512K (64 bytes/line)
Aug 31 15:26:43 localhost kernel: Intel machine check architecture supported.
Aug 31 15:26:43 localhost kernel: Intel machine check reporting
enabled on CPU#0.
Aug 31 15:26:43 localhost kernel: CPU: AMD Mobile AMD Athl stepping 00
Aug 31 15:26:43 localhost kernel: Enabling fast FPU save and restore... done.
Aug 31 15:26:43 localhost kernel: Enabling unmasked SIMD FPU exception
support... done.
Aug 31 15:26:43 localhost kernel: Checking 'hlt' instruction... OK.
Aug 31 15:26:43 localhost kernel: enabled ExtINT on CPU#0
Aug 31 15:26:43 localhost kernel: ESR value before enabling vector: 00000000
Aug 31 15:26:43 localhost kernel: ESR value after enabling vector: 00000000
Aug 31 15:26:43 localhost kernel: Using local APIC timer interrupts.
Aug 31 15:26:43 localhost kernel: calibrating APIC timer ...
Aug 31 15:26:43 localhost kernel: ..... CPU clock speed is 2002.0084 MHz.
Aug 31 15:26:43 localhost kernel: ..... host bus clock speed is 266.0944 MHz.
Aug 31 15:26:43 localhost kernel: checking if image is initramfs...it
isn't (ungzip failed); looks like an initrd
Aug 31 15:26:43 localhost kernel: Freeing initrd memory: 4468k freed
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 16
Aug 31 15:26:43 localhost kernel: PCI: PCI BIOS revision 2.10 entry at
0xfb5c0, last bus=1
Aug 31 15:26:43 localhost kernel: PCI: Using configuration type 1
Aug 31 15:26:43 localhost kernel: mtrr: v2.0 (20020519)
Aug 31 15:26:43 localhost kernel: ACPI: Subsystem revision 20040326
Aug 31 15:26:43 localhost kernel: spurious 8259A interrupt: IRQ7.
Aug 31 15:26:43 localhost kernel: ACPI: IRQ9 SCI: Level Trigger.
Aug 31 15:26:43 localhost kernel: ACPI: Interpreter enabled
Aug 31 15:26:43 localhost kernel: ACPI: Using PIC for interrupt routing
Aug 31 15:26:43 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Aug 31 15:26:43 localhost kernel: PCI: Probing PCI hardware (bus 00)
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKA]
(IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKB]
(IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKC]
(IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKD]
(IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [ALKA]
(IRQs 20) *0, disabled.
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [ALKB]
(IRQs 21) *0, disabled.
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [ALKC]
(IRQs 22) *0, disabled.
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [ALKD]
(IRQs 23) *0, disabled.
Aug 31 15:26:43 localhost kernel: Linux Plug and Play Support v0.97
(c) Adam Belay
Aug 31 15:26:43 localhost kernel: PnPBIOS: Scanning system for PnP
BIOS support...
Aug 31 15:26:43 localhost kernel: PnPBIOS: Found PnP BIOS installation
structure at 0xc00fc080
Aug 31 15:26:43 localhost kernel: PnPBIOS: PnP BIOS version 1.0, entry
0xf0000:0xc0b0, dseg 0xf0000
Aug 31 15:26:43 localhost kernel: PnPBIOS: 14 nodes reported by PnP
BIOS; 14 recorded by driver
Aug 31 15:26:43 localhost kernel: PCI: Using ACPI for IRQ routing
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKC]
enabled at IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:0b.0[A]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKD]
enabled at IRQ 5
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:0c.0[A]
-> GSI 5 (level, low) -> IRQ 5
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKA]
enabled at IRQ 10
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.0[A]
-> GSI 10 (level, low) -> IRQ 10
Aug 31 15:26:43 localhost kernel: ACPI: PCI Interrupt Link [LNKB]
enabled at IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.1[B]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.2[C]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.3[D]
-> GSI 5 (level, low) -> IRQ 5
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:11.1[A]
-> GSI 10 (level, low) -> IRQ 10
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:11.5[C]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A]
-> GSI 10 (level, low) -> IRQ 10
Aug 31 15:26:43 localhost kernel: VFS: Disk quotas dquot_6.5.1
Aug 31 15:26:43 localhost kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Aug 31 15:26:43 localhost kernel: devfs: 2004-01-31 Richard Gooch
([EMAIL PROTECTED])
Aug 31 15:26:43 localhost kernel: devfs: boot_options: 0x0
Aug 31 15:26:43 localhost kernel: Initializing Cryptographic API
Aug 31 15:26:43 localhost kernel: isapnp: Scanning for PnP cards...
Aug 31 15:26:43 localhost kernel: isapnp: No Plug & Play device found
Aug 31 15:26:43 localhost kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 48 ports, IRQ sharing enabled
Aug 31 15:26:43 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 31 15:26:43 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Aug 31 15:26:43 localhost kernel: RAMDISK driver initialized: 16 RAM
disks of 8192K size 1024 blocksize
Aug 31 15:26:43 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 31 15:26:43 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 31 15:26:43 localhost kernel: input: AT Translated Set 2 keyboard
on isa0060/serio0
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 2
Aug 31 15:26:43 localhost kernel: IP: routing cache hash table of 4096
buckets, 32Kbytes
Aug 31 15:26:43 localhost kernel: TCP: Hash tables configured
(established 32768 bind 65536)
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 8
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 20
Aug 31 15:26:43 localhost kernel: ACPI: (supports S0 S1 S4 S5)
Aug 31 15:26:43 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Aug 31 15:26:43 localhost kernel: RAMDISK: Loading 4468 blocks [1
disk] into ram disk...
|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^Hdone.
Aug 31 15:26:43 localhost kernel: VFS: Mounted root (cramfs
filesystem) readonly.
Aug 31 15:26:43 localhost kernel: Freeing unused kernel memory: 148k freed
Aug 31 15:26:43 localhost kernel: vesafb: probe of vesafb0 failed with error -6
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 1
Aug 31 15:26:43 localhost kernel: SCSI subsystem initialized
Aug 31 15:26:43 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Aug 31 15:26:43 localhost kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Aug 31 15:26:43 localhost kernel: VP_IDE: IDE controller at PCI slot
0000:00:11.1
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:11.1[A]
-> GSI 10 (level, low) -> IRQ 10
Aug 31 15:26:43 localhost kernel: VP_IDE: chipset revision 6
Aug 31 15:26:43 localhost kernel: VP_IDE: not 100%% native mode: will
probe irqs later
Aug 31 15:26:43 localhost kernel: VP_IDE: VIA vt8235 (rev 00) IDE
UDMA133 controller on pci0000:00:11.1
Aug 31 15:26:43 localhost kernel: ide0: BM-DMA at 0xe400-0xe407,
BIOS settings: hda:DMA, hdb:pio
Aug 31 15:26:43 localhost kernel: ide1: BM-DMA at 0xe408-0xe40f,
BIOS settings: hdc:DMA, hdd:pio
Aug 31 15:26:43 localhost kernel: hda: SAMSUNG SP1614N, ATA DISK drive
Aug 31 15:26:43 localhost kernel: Using anticipatory io scheduler
Aug 31 15:26:43 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 31 15:26:43 localhost kernel: hda: max request size: 1024KiB
Aug 31 15:26:43 localhost kernel: hda: 312581808 sectors (160041 MB)
w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
Aug 31 15:26:43 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Aug 31 15:26:43 localhost kernel: hdc: ATAPI DVD+RW 8X4X12, ATAPI
CD/DVD-ROM drive
Aug 31 15:26:43 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 31 15:26:43 localhost kernel: kjournald starting. Commit interval 5 seconds
Aug 31 15:26:43 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Aug 31 15:26:43 localhost kernel: Adding 787176k swap on /dev/hda2.
Priority:-1 extents:1
Aug 31 15:26:43 localhost kernel: EXT3 FS on hda3, internal journal
Aug 31 15:26:43 localhost kernel: hdc: ATAPI 40X DVD-ROM CD-R/RW
drive, 8192kB Cache, UDMA(33)
Aug 31 15:26:43 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Aug 31 15:26:43 localhost kernel: input: PS/2 Generic Mouse on isa0060/serio1
Aug 31 15:26:43 localhost kernel: mice: PS/2 mouse device common for all mice
Aug 31 15:26:43 localhost kernel: ts: Compaq touchscreen protocol output
Aug 31 15:26:43 localhost kernel: sbp2: $Rev: 1219 $ Ben Collins
<[EMAIL PROTECTED]>
Aug 31 15:26:43 localhost kernel: Capability LSM initialized
Aug 31 15:26:43 localhost kernel: ohci1394: $Rev: 1223 $ Ben Collins
<[EMAIL PROTECTED]>
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:0c.0[A]
-> GSI 5 (level, low) -> IRQ 5
Aug 31 15:26:43 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.0
(PCI): IRQ=[5] MMIO=[ee001000-ee0017ff] Max Packet=[2048]
Aug 31 15:26:43 localhost kernel: NET: Registered protocol family 23
Aug 31 15:26:43 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:0b.0[A]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: eth0: RealTek RTL8139 at 0xd000,
00:30:1b:ab:ed:36, IRQ 11
Aug 31 15:26:43 localhost kernel: usbcore: registered new driver usbfs
Aug 31 15:26:43 localhost kernel: usbcore: registered new driver hub
Aug 31 15:26:43 localhost kernel: USB Universal Host Controller
Interface driver v2.2
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.0[A]
-> GSI 10 (level, low) -> IRQ 10
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.0: VIA
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.0: irq 10, io
base 0000d800
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus
registered, assigned bus number 1
Aug 31 15:26:43 localhost kernel: hub 1-0:1.0: USB hub found
Aug 31 15:26:43 localhost kernel: hub 1-0:1.0: 2 ports detected
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.1[B]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.1: VIA
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.1: irq 11, io
base 0000dc00
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus
registered, assigned bus number 2
Aug 31 15:26:43 localhost kernel: hub 2-0:1.0: USB hub found
Aug 31 15:26:43 localhost kernel: hub 2-0:1.0: 2 ports detected
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.2[C]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.2: VIA
Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.2: irq 11, io
base 0000e000
Aug 31 15:26:43 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus
registered, assigned bus number 3
Aug 31 15:26:43 localhost kernel: hub 3-0:1.0: USB hub found
Aug 31 15:26:43 localhost kernel: hub 3-0:1.0: 2 ports detected
Aug 31 15:26:43 localhost kernel: ip1394: $Rev: 1224 $ Ben Collins
<[EMAIL PROTECTED]>
Aug 31 15:26:43 localhost kernel: usb 1-2: new full speed USB device
using address 2
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:10.3[D]
-> GSI 5 (level, low) -> IRQ 5
Aug 31 15:26:43 localhost kernel: ehci_hcd 0000:00:10.3: VIA
Technologies, Inc. USB 2.0
Aug 31 15:26:43 localhost kernel: ehci_hcd 0000:00:10.3: irq 5, pci mem e0a6b000
Aug 31 15:26:43 localhost kernel: ehci_hcd 0000:00:10.3: new USB bus
registered, assigned bus number 4
Aug 31 15:26:43 localhost kernel: ehci_hcd 0000:00:10.3: USB 2.0
enabled, EHCI 1.00, driver 2004-May-10
Aug 31 15:26:43 localhost kernel: hub 4-0:1.0: USB hub found
Aug 31 15:26:43 localhost kernel: hub 4-0:1.0: 6 ports detected
Aug 31 15:26:43 localhost kernel: Linux agpgart interface v0.100 (c) Dave Jones
Aug 31 15:26:43 localhost kernel: agpgart: Detected VIA PM266/KM266 chipset
Aug 31 15:26:43 localhost kernel: agpgart: Maximum main memory to use
for agp memory: 439M
Aug 31 15:26:43 localhost kernel: agpgart: AGP aperture is 64M @ 0xe8000000
Aug 31 15:26:43 localhost kernel: usb 1-2: new full speed USB device
using address 4
Aug 31 15:26:43 localhost kernel: cpci_hotplug: CompactPCI Hot Plug
Core version: 0.2
Aug 31 15:26:43 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Aug 31 15:26:43 localhost kernel: usbcore: registered new driver hiddev
Aug 31 15:26:43 localhost kernel: input: USB HID v1.00 Device [Labtec
Labtec USB Speaker System] on usb-0000:00:10.0-2
Aug 31 15:26:43 localhost kernel: usbcore: registered new driver usbhid
Aug 31 15:26:43 localhost kernel: drivers/usb/input/hid-core.c:
v2.0:USB HID core driver
Aug 31 15:26:43 localhost kernel: USB Audio: using volume control
quirk for the UDA1321/N101 chip
Aug 31 15:26:43 localhost kernel: usbcore: registered new driver snd-usb-audio
Aug 31 15:26:43 localhost kernel: 8139cp: 10/100 PCI Ethernet driver
v1.2 (Mar 22, 2004)
Aug 31 15:26:43 localhost kernel: ACPI: PCI interrupt 0000:00:11.5[C]
-> GSI 11 (level, low) -> IRQ 11
Aug 31 15:26:43 localhost kernel: Real Time Clock Driver v1.12
Aug 31 15:26:43 localhost kernel: input: PC Speaker
Aug 31 15:26:43 localhost kernel: parport: PnPBIOS parport detected.
Aug 31 15:26:43 localhost kernel: parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE]
Aug 31 15:26:43 localhost kernel: eth0: link up, 100Mbps, full-duplex,
lpa 0x45E1
Aug 31 15:26:46 localhost kernel: NET: Registered protocol family 10
Aug 31 15:26:46 localhost kernel: Disabled Privacy Extensions on
device c02fc1a0(lo)
Aug 31 15:26:46 localhost kernel: IPv6 over IPv4 tunneling driver
Aug 31 15:26:48 localhost kernel: drivers/usb/input/hid-input.c: event
field not found
Aug 31 15:40:26 localhost kernel: usb 1-2: control timeout on ep0in
Aug 31 16:06:43 localhost -- MARK --
Aug 31 17:46:43 localhost -- MARK --
Aug 31 18:00:48 localhost gconfd (km-4727): starting (version 2.8.1),
pid 4727 user 'km'
Aug 31 18:00:48 localhost gconfd (km-4727): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at position 0
Aug 31 18:00:48 localhost gconfd (km-4727): Resolved address
"xml:readwrite:/home/km/.gconf" to a writable configuration source at
position 1
Aug 31 18:00:48 localhost gconfd (km-4727): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source atposition 2
Aug 31 18:26:43 localhost -- MARK --
Aug 31 21:46:43 localhost -- MARK --
Aug 31 21:55:53 localhost kernel: usb 1-2: USB disconnect, address 4
Aug 31 21:56:00 localhost kernel: usb 1-2: new full speed USB device
using address 5
Aug 31 21:56:00 localhost kernel: USB Audio: using volume control
quirk for the UDA1321/N101 chip
Aug 31 21:56:01 localhost kernel: input: USB HID v1.00 Device [Labtec
Labtec USB Speaker System] on usb-0000:00:10.0-2
Aug 31 21:56:02 localhost usb.agent[5044]: snd-usb-audio: already loaded
Aug 31 21:56:02 localhost input.agent[5119]: evdev: already loaded
Aug 31 21:56:02 localhost usb.agent[5137]: usbhid: already loaded
Aug 31 21:56:02 localhost input.agent[5119]: joydev: already loaded
Aug 31 21:56:02 localhost input.agent[5202]: evdev: already loaded
Aug 31 22:06:16 localhost kernel: usb 1-2: control timeout on ep0in
Aug 31 22:06:38 localhost last message repeated 2 times
Aug 31 22:07:23 localhost last message repeated 2 times
Aug 31 22:08:32 localhost kernel: usb 1-2: control timeout on ep0in
Aug 31 22:13:21 localhost kernel: usb 1-2: control timeout on ep0in
Aug 31 22:17:35 localhost kernel: ACPI: Processor [CPU0] (supports C1
C2, 2 throttling states)
Aug 31 22:17:35 localhost kernel: powernow: PowerNOW! Technology
present. Can scale: frequency and voltage.
Aug 31 22:17:35 localhost kernel: powernow: FSB: 133.516 MHz
Aug 31 22:17:35 localhost kernel: powernow: Trying ACPI perflib
Aug 31 22:17:35 localhost kernel: powernow: ACPI perflib can not be
used in this platform
Aug 31 22:17:35 localhost kernel: powernow: ACPI and legacy methods failed
Aug 31 22:17:35 localhost kernel: powernow: See
http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml
Aug 31 22:46:44 localhost -- MARK --
Sep 1 06:06:45 localhost -- MARK --
Sep 1 06:26:44 localhost syslogd 1.4.1#17: restart.
Sep 1 06:46:45 localhost -- MARK --
Sep 1 13:21:55 localhost kernel: powernow: PowerNOW! Technology
present. Can scale: frequency and voltage.
Sep 1 13:21:55 localhost kernel: powernow: FSB: 133.516 MHz
Sep 1 13:21:55 localhost kernel: powernow: Trying ACPI perflib
Sep 1 13:21:55 localhost kernel: powernow: ACPI perflib can not be
used in this platform
Sep 1 13:21:55 localhost kernel: powernow: ACPI and legacy methods failed
Sep 1 13:21:55 localhost kernel: powernow: See
http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.shtml
