> CaseA (MODULES=list, netconsole param from bootloader, tested on an > armel/orion5x device): > - /etc/initramfs-tools/initramfs.conf: > MODULES=list > > - /etc/initramfs-tools/modules: > mv643xx_eth > netconsole > mvmdio > sata_mv > sd_mod > raid1 > jfs > > CaseB (MODULES=dep, netconsole param from bootloader, tested on an > armel/orion5x device): > - /etc/initramfs-tools/initramfs.conf: > MODULES=dep > > - /etc/initramfs-tools/modules: > mv643xx_eth > netconsole > mvmdio > > CaseC (MODULES=most, netconsole param from bootloader, tested on x86-64 > device): > -/etc/initramfs-tools/initramfs.conf: > MODULES=most > > - /etc/initramfs-tools/modules: > # empty
all previous cases were using netconsole param from bootloader, so I created Case A2 to use netconsole param from conf/modules. CaseA2 (MODULES=list, netconsole param from conf/modules, tested on an armel/kirkwood device): - /etc/initramfs-tools/initramfs.conf: MODULES=list - /etc/initramfs-tools/modules: mv643xx_eth netconsole mvmdio sata_mv sd_mod raid1 xfs This time I ran case A/A2/B on an armel/kirkwood device Linkstation LS-WXL. Enclosed the netconsole boot log. Cheers, Roger
netconsole_log2.tar.gz
Description: GNU Zip compressed data
