--- Begin Message ---
Package: src:linux
Version: 4.2.3-2
Severity: important
Hi,
I cannot use KVM with 4.2, qemu loops with 100% CPU during seabios
initialization. Booting with the latest linux-image-4.1.0-2-amd64 fixes
the issue.
The simplest reproducer is
qemu-system-x86_64 --enable-kvm
but it happens with all kinds of qemu command lines, directly or via
libvirt.
kvm tracing shows:
...
qemu-system-x86-3219 [007] .... 1090.728418: kvm_set_irq: gsi 12 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728418: kvm_pic_set_irq: chip 1 pin 4
(edge|masked)
qemu-system-x86-3219 [007] .... 1090.728419: kvm_ioapic_set_irq: pin 12 dst
0 vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3219 [007] .... 1090.728419: kvm_set_irq: gsi 1 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728420: kvm_pic_set_irq: chip 0 pin 1
(edge|masked)
qemu-system-x86-3219 [007] .... 1090.728420: kvm_ioapic_set_irq: pin 1 dst 0
vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3219 [007] .... 1090.728420: kvm_set_irq: gsi 12 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728421: kvm_pic_set_irq: chip 1 pin 4
(edge|masked)
qemu-system-x86-3219 [007] .... 1090.728421: kvm_ioapic_set_irq: pin 12 dst
0 vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3219 [007] .... 1090.728723: kvm_set_irq: gsi 0 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728724: kvm_pic_set_irq: chip 0 pin 0
(edge)
qemu-system-x86-3219 [007] .... 1090.728725: kvm_ioapic_set_irq: pin 2 dst 0
vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3219 [007] .... 1090.728725: kvm_set_irq: gsi 0 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728725: kvm_pic_set_irq: chip 0 pin 0
(edge)
qemu-system-x86-3219 [007] .... 1090.728725: kvm_ioapic_set_irq: pin 2 dst 0
vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3219 [007] .... 1090.728726: kvm_set_irq: gsi 0 level 0
source 0
qemu-system-x86-3219 [007] .... 1090.728726: kvm_pic_set_irq: chip 0 pin 0
(edge)
qemu-system-x86-3219 [007] .... 1090.728726: kvm_ioapic_set_irq: pin 2 dst 0
vec=0 (Fixed|physical|edge|masked)
qemu-system-x86-3221 [000] d... 1090.729926: kvm_write_tsc_offset: vcpu=0
prev=18446740943986499809 next=18446740943986499809
qemu-system-x86-3221 [000] .... 1090.729927: kvm_track_tsc: vcpu_id 0
masterclock 1 offsetmatched 0 nr_online 1 hostclock tsc
qemu-system-x86-3221 [000] .... 1090.730004: kvm_update_master_clock:
masterclock 1 hostclock tsc offsetmatched 1
qemu-system-x86-3221 [000] d... 1090.730010: kvm_entry: vcpu 0
qemu-system-x86-3221 [000] .... 1090.730013: kvm_emulate_insn:
ffff0000:fff0:ea 5b e0 00 f0 (real)
qemu-system-x86-3221 [000] d... 1090.730016: kvm_entry: vcpu 0
qemu-system-x86-3221 [000] d... 1090.730017: kvm_exit: reason EPT_VIOLATION
rip 0xe05b info 81 0
qemu-system-x86-3221 [000] .... 1090.730018: kvm_page_fault: address
feffc000 error_code 81
qemu-system-x86-3221 [000] d... 1090.730032: kvm_entry: vcpu 0
qemu-system-x86-3221 [000] d... 1090.730034: kvm_exit: reason EXCEPTION_NMI
rip 0xe05b info 0 80000b08
qemu-system-x86-3221 [000] .... 1090.730035: kvm_inj_exception: #DF (0x0)
qemu-system-x86-3221 [000] d... 1090.730040: kvm_entry: vcpu 0
qemu-system-x86-3221 [000] d... 1090.730041: kvm_exit: reason EXCEPTION_NMI
rip 0xfea5 info 0 80000b08
qemu-system-x86-3221 [000] .... 1090.730041: kvm_inj_exception: #DF (0x0)
qemu-system-x86-3221 [000] d... 1090.730043: kvm_entry: vcpu 0
...
>From there, the last 3 lines are repeated forever. The trace complete from the
>beginning is available at
http://www.sfritsch.de/~stf/kvm.trace.xz
I am rather surprised that there is no bug report about this yet, so I
guess it only happens on some hardware. Mine is a Core i7-860.
-- Package-specific info:
** Version:
Linux version 4.2.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3
(Debian 4.9.3-4) ) #1 SMP Debian 4.2.3-2 (2015-10-14)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64
root=UUID=d73302da-e64e-4b2f-bfa4-8bf2dc4df11d ro
** Not tainted
** Kernel log:
[ 4.877300] iTCO_vendor_support: vendor-support=0
[ 4.879419] input: HDA Intel MID Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.879573] input: HDA Intel MID Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.879726] input: HDA Intel MID Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.879875] input: HDA Intel MID Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.880221] input: HDA Intel MID Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.882180] input: HDA Intel MID Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.882341] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280a2
[ 4.882347] input: HDA Intel MID Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.882468] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 4.882524] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 4.883736] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.883835] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.883995] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.002263] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 5.002400] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 5.002452] nouveau [ VBIOS][0000:01:00.0] version 70.18.2d.00.00
[ 5.022732] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 5.022818] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 5.022869] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 5.022920] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 5.025650] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 5.028137] Adding 1572860k swap on /dev/mapper/vg0-swap. Priority:-1
extents:1 across:1572860k SSFS
[ 5.693366] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input16
[ 5.694516] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input17
[ 5.694645] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 5.694770] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 6.092946] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 6.093013] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 6.093069] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 6.113086] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270
MHz memory 135 MHz
[ 6.113170] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810
MHz memory 405 MHz
[ 6.113256] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402
MHz memory 405 MHz
[ 6.113356] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810
MHz memory 405 MHz
[ 6.113595] [TTM] Zone kernel: Available graphics memory: 4085602 kiB
[ 6.113596] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.113597] [TTM] Initializing pool allocator
[ 6.113605] [TTM] Initializing DMA pool allocator
[ 6.113617] nouveau [ DRM] VRAM: 512 MiB
[ 6.113618] nouveau [ DRM] GART: 1048576 MiB
[ 6.113621] nouveau [ DRM] TMDS table version 2.0
[ 6.113622] nouveau [ DRM] DCB version 4.0
[ 6.113623] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 6.113625] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 6.113626] nouveau [ DRM] DCB outp 02: 02011362 0f220010
[ 6.113627] nouveau [ DRM] DCB outp 03: 01022310 00020010
[ 6.113629] nouveau [ DRM] DCB conn 00: 00001030
[ 6.113630] nouveau [ DRM] DCB conn 01: 00102161
[ 6.113631] nouveau [ DRM] DCB conn 02: 00000200
[ 6.154844] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.154845] [drm] Driver supports precise vblank timestamp query.
[ 6.157739] EXT4-fs (dm-11): mounted filesystem with ordered data mode.
Opts: (null)
[ 6.194162] nouveau [ DRM] MM: using COPY for buffer copies
[ 6.202192] EXT4-fs (dm-10): barriers disabled
[ 6.202855] EXT4-fs (dm-10): mounted filesystem with ordered data mode.
Opts: barrier=0
[ 6.207159] EXT4-fs (dm-12): mounted filesystem with ordered data mode.
Opts: (null)
[ 6.227189] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
(null)
[ 6.228908] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts:
(null)
[ 6.270444] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo
ffff8802250a0400
[ 6.270575] fbcon: nouveaufb (fb0) is primary device
[ 6.341367] Console: switching to colour frame buffer device 160x64
[ 6.343343] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.343344] nouveau 0000:01:00.0: registered panic notifier
[ 6.348968] systemd-journald[302]: Received request to flush runtime journal
from PID 1
[ 6.356968] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on
minor 0
[ 6.515985] REISERFS (device dm-1): found reiserfs format "3.6" with
standard journal
[ 6.516000] REISERFS (device dm-1): using ordered data mode
[ 6.516003] reiserfs: using flush barriers
[ 6.516118] REISERFS (device dm-1): journal params: device dm-1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 6.516327] REISERFS (device dm-1): checking transaction log (dm-1)
[ 7.781122] REISERFS (device dm-1): Using r5 hash to sort names
[ 7.797123] floppy0: no floppy controllers found
[ 7.797145] work still pending
[ 8.081130] EXT4-fs (dm-13): barriers disabled
[ 8.112650] EXT4-fs (dm-13): mounted filesystem with ordered data mode.
Opts: barrier=0
[ 8.586659] EXT4-fs (dm-2): barriers disabled
[ 8.591548] EXT4-fs (dm-2): mounted filesystem with writeback data mode.
Opts: nobarrier,data=writeback,noauto_da_alloc,journal_async_commit
[ 8.730474] EXT4-fs (dm-3): barriers disabled
[ 8.734844] EXT4-fs (dm-3): mounted filesystem with writeback data mode.
Opts: nobarrier,data=writeback,journal_async_commit
[ 8.753313] EXT4-fs (dm-5): barriers disabled
[ 8.765171] EXT4-fs (dm-5): mounted filesystem with writeback data mode.
Opts: nobarrier,data=writeback,noauto_da_alloc,journal_async_commit
[ 9.091568] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 9.146400] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 9.174922] r8169 0000:03:00.0: firmware: direct-loading firmware
rtl_nic/rtl8168d-2.fw
[ 9.234701] r8169 0000:03:00.0 eth0: link down
[ 9.234723] r8169 0000:03:00.0 eth0: link down
[ 9.235777] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.380415] RPC: Registered named UNIX socket transport module.
[ 9.380830] RPC: Registered udp transport module.
[ 9.381338] RPC: Registered tcp transport module.
[ 9.382110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.386869] FS-Cache: Loaded
[ 9.394915] FS-Cache: Netfs 'nfs' registered for caching
[ 9.403346] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 9.461426] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 9.469516] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.249810] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.280843] Ebtables v2.0 registered
[ 11.592968] r8169 0000:03:00.0 eth0: link up
[ 11.592979] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: P55-UD3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F9
board_vendor: Gigabyte Technology Co., Ltd.
board_name: P55-UD3
board_version: x.x
** Loaded modules:
ebtable_filter
ebtables
ip6table_filter
ip6_tables
binfmt_misc
xt_owner
xt_tcpudp
xt_conntrack
iptable_nat
nf_nat_ipv4
nf_nat
iptable_filter
ip_tables
x_tables
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
bridge
stp
llc
reiserfs
snd_hda_codec_hdmi
joydev
iTCO_wdt
iTCO_vendor_support
nouveau
snd_hda_codec_realtek
snd_hda_codec_generic
mxm_wmi
wmi
video
ttm
snd_hda_intel
drm_kms_helper
coretemp
kvm_intel
snd_hda_codec
kvm
snd_hda_core
evdev
pcspkr
serio_raw
snd_hwdep
synaptics_usb
i7core_edac
snd_pcm_oss
drm
snd_mixer_oss
edac_core
i2c_i801
i2c_algo_bit
snd_pcm
sg
snd_timer
lpc_ich
mfd_core
snd
soundcore
shpchp
acpi_cpufreq
8250_fintek
processor
button
thermal_sys
it87
hwmon_vid
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
raid1
sr_mod
cdrom
ata_generic
md_mod
hid_generic
usbhid
hid
sd_mod
uas
usb_storage
crc32c_intel
ahci
libahci
pata_jmicron
libata
uhci_hcd
ehci_pci
xhci_pci
xhci_hcd
ehci_hcd
r8169
mii
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131]
(rev 11)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root
Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System
Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore
and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System
Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor
Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link
[8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing
and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b3b] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b3e] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b3f] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset
High Definition Audio [8086:3b56] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 39
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000cf800000-00000000cf9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000fbb00000-00000000fbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI
Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b36] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b37] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b38] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB Universal Host Controller [8086:3b39] (rev 05) (prog-if 00 [UHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at f900 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset
USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface
Controller [8086:3b02] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 38
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f700 [size=4]
Region 2: I/O ports at f600 [size=8]
Region 3: I/O ports at f500 [size=4]
Region 4: I/O ports at f400 [size=32]
Region 5: Memory at fbffd000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus
Controller [8086:3b30] (rev 05)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce
210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:1401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio
Controller [10de:0be3] (rev a1)
Subsystem: CardExpert Technology Device [10b0:1401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fbdfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ef00 [size=8]
Region 1: I/O ports at ee00 [size=4]
Region 2: I/O ports at ed00 [size=8]
Region 3: I/O ports at ec00 [size=4]
Region 4: I/O ports at eb00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fbbff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbbf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fbc00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host
Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture Generic Non-Core Registers [8086:2c51] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath
Architecture System Address Decoder [8086:2c81] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0
[8086:2c90] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: i7core_edac
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0
[8086:2c91] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller [8086:2c98] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Target Address Decoder [8086:2c99] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Test Registers [8086:2c9c] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
3f:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory
Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 004 Device 002: ID 18e3:9102 Fitipower Integrated Technology Inc Multi Card
Reader
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 004: ID 06cb:0009 Synaptics, Inc. Composite TouchPad and
TrackPoint
Bus 011 Device 003: ID 04b3:3018 IBM Corp. UltraNav Keyboard
Bus 011 Device 002: ID 04b3:3016 IBM Corp. UltraNav Keyboard Hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 2109:0812 VIA Labs, Inc. VL812 Hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 2109:2812 VIA Labs, Inc. VL812 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 4.2.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.2.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
Versions of packages linux-image-4.2.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-29
ii linux-doc-4.2 4.2.3-2
Versions of packages linux-image-4.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 20151018-2
ii firmware-misc-nonfree [firmware-ralink] 20151018-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20151018-2
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-1-amd64/postinst/depmod-error-initrd-4.2.0-1-amd64: false
linux-image-4.2.0-1-amd64/postinst/mips-initrd-4.2.0-1-amd64:
linux-image-4.2.0-1-amd64/prerm/removing-running-kernel-4.2.0-1-amd64: true
--- End Message ---
signature.asc
