Package: kernel-image-2.4.27-2-386
Version: 2.4.27-10
Severity: important
On this machine, I get the following error several times by hour:
hda: dma_timer_expiry: dma status == 0x21
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
and the whole machine freezes for several seconds.
You'll find below the output of dmesg and "lspci -v".
-- System Information:
Debian Release: 3.1
Architecture: i386 (i686)
Kernel: Linux 2.4.27-2-386
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=en_US.ISO8859-1 (charmap=ISO-8859-1)
Versions of packages kernel-image-2.4.27-2-386 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii initrd-tools 0.1.81.1 tools to create initrd image for p
ii modutils 2.4.26-1.2 Linux module utilities
-- no debconf information
Linux version 2.4.27-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian
1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff8000 (ACPI data)
BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 97 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hda1 ro
No local APIC present or hardware disabled
Initializing CPU#0
Detected 499.049 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 992.87 BogoMIPS
Memory: 123592k/131008k available (1069k kernel code, 7028k reserved, 459k
data, 96k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After generic, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: Common caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: AMD-K7(tm) Processor stepping 02
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 14) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 91360U4, ATA DISK drive
blk: queue c8825b60, I/O limit 4095Mb (mask 0xffffffff)
hdc: TSST CDW/DVD TS-H492A, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-113 0113, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=26377/16/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0:hda: dma_intr: status=0x51 { DriveReady
SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide0: reset: success
[PTBL] [1655/255/63] p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 698788k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected AMD Irongate chipset
agpgart: AGP aperture is 64M @ 0xe8000000
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport_pc: Via 686A parallel port: io=0x378
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
PCI: Sharing IRQ 11 with 01:05.0
eth0: RealTek RTL8139 at 0xd000, 00:30:84:27:b4:79, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Creative EMU10K1 PCI Audio Driver, version 0.20, 16:51:53 May 16 2005
PCI: Found IRQ 9 for device 00:0f.0
PCI: Sharing IRQ 9 with 00:07.2
emu10k1: EMU10K1 rev 4 model 0x20 found, IO at 0xcc00-0xcc1f, IRQ 9
ac97_codec: AC97 codec, id: TRA3 (TriTech TR28023)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:52:03 May 16 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:07.2
PCI: Sharing IRQ 9 with 00:0f.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x3f0/0x8104) is not claimed by any active
driver.
gameport0: Emu10k1 Gameport at 0xdc00 size 8 speed 1269 kHz
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
uhci.c: USB Universal Host Controller Interface driver v1.1
btaudio: driver version 0.7 loaded [digital+analog]
PCI: Found IRQ 10 for device 00:04.1
PCI: Sharing IRQ 10 with 00:04.0
btaudio: Bt878 (rev 2) at 00:04.1, irq: 10, latency: 64, mmio: 0xeddfe000
btaudio: using card config "default"
btaudio: registered device dsp2 [digital]
btaudio: registered device dsp3 [analog]
btaudio: registered device mixer1
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.108 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Bt8xx card found (0).
PCI: Found IRQ 10 for device 00:04.0
PCI: Sharing IRQ 10 with 00:04.1
bttv0: Bt878 (rev 2) at 00:04.0, irq: 10, latency: 64, mmio: 0xeddfd000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: Hauppauge eeprom: model=61344, tuner=Philips FM1216 (5), radio=yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3410D-B4 +nicam +simple
msp3410: daemon started
i2c-core.o: client [MSP3410D-B4] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
i2c-core.o: driver generic i2c audio driver registered.
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
i2c-core.o: client [Philips PAL_BG (FI1216 and comp] registered to adapter
[bt848 #0](pos. 1).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
usb.c: registered new driver usblp
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid
0x03F0 pid 0x8104
printer.c: v0.13: USB Printer Device Class driver
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
hda: dma_timer_expiry: dma status == 0x21
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
hda: dma_timer_expiry: dma status == 0x21
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
usb.c: USB disconnect on device 00:07.2-1 address 2
printer.c: usblp0: removed
hub.c: new USB device 00:07.2-1, assigned address 3
printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid
0x03F0 pid 0x8104
hda: dma_timer_expiry: dma status == 0x21
hda: error waiting for DMA
hda: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest }
------------------------------------------------------------
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller (rev 23)
Flags: bus master, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Memory at eddff000 (32-bit, prefetchable) [size=4K]
I/O ports at d800 [disabled] [size=4]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ede00000-efefffff
Prefetchable memory behind bridge: e3c00000-e5cfffff
0000:00:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at eddfd000 (32-bit, prefetchable) [size=4K]
0000:00:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at eddfe000 (32-bit, prefetchable) [size=4K]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 14)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at ffa0 [size=16]
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 06) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at d400 [size=32]
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 10)
Flags: medium devsel
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Allied Telesyn International AT-2500TX/ACPI
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at d000 [size=256]
Memory at efffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:0f.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
04)
Subsystem: Creative Labs CT4850 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at cc00 [size=32]
Capabilities: <available only to root>
0000:00:0f.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 01)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at dc00 [size=8]
Capabilities: <available only to root>
0000:01:05.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev
04) (prog-if 00 [VGA])
Subsystem: Creative Labs Graphics Blaster CT6710
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
Memory at e4000000 (32-bit, prefetchable) [size=16M]
Expansion ROM at efef0000 [disabled] [size=64K]
Capabilities: <available only to root>
