(Sorry for the duplicate. Forgot to CC the bug before)
$ lspci -v
0000:00:00.0 Host bridge: Intel Corp. 430FX - 82437FX TSC [Triton I] (rev
01)
Flags: bus master, medium devsel, latency 64
0000:00:07.0 ISA bridge: Intel Corp. 82371FB PIIX ISA [Triton I] (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:07.1 IDE interface: Intel Corp. 82371FB PIIX IDE [Triton I] (rev 02)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
0000:00:0d.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Flags: medium devsel, IRQ 11
Memory at ff000000 (32-bit, non-prefetchable) [size=8M]
I'll get you the exact error message hopefully later today.
In general I'm planning on using 2.6.8, but I was hoping to get 2.4.27
working so in the event I have some problem when I do an upgrade on 2.6.8 I
have some other kernel around to fall back on.
----------------
Thanks
Jefferson Cowart
[EMAIL PROTECTED]
> -----Original Message-----
> From: Horms [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 07, 2005 03:09
> To: Jefferson Cowart; [EMAIL PROTECTED]
> Subject: Re: Bug#312279: kernel-image-2.4.27-2-586tsc: System
> fails to boot with 2.4.27 installed
>
> On Mon, Jun 06, 2005 at 06:01:47PM -0700, Jefferson Cowart wrote:
> > Package: kernel-image-2.4.27-2-586tsc
> > Version: 2.4.27-10
> > Severity: important
> >
> > I installed kernel-image-2.4.27-2-586tsc on my system.
> After rebooting
> > the system failed to boot with a kernel panic and something about
> > killing init. (Sorry I don't remember the exact error, but it is the
> > kind of error I get when it fails to mount my drive.)
> Directly before
> > this I got a bunch of errors about my ide devices. The system does
> > however boot 2.6.8 fine so I don't think it is a hardware problem.
> >
> > I'm sure you will need more info to diagnose this, so please let
> > me know what you need.
>
> Hi, this is a bit vauge, can you provide more information on
> what errors you are seeing, and what devices you have
> (lspci -v). Also, I would say that if 2.6.8 is working, use that.
>
> --
> Horms
>
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
