On Wed, 27 Apr 2005, Sebastien Delafond wrote: > On Wed, Apr 27, 2005 at 10:47:06PM +0200, maximilian attems wrote: > > please send in also working dmesg of kernel 2.6.9? > > ICH5: IDE controller at PCI slot 0000:00:1f.1 > PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) > ICH5: chipset revision 2 > ICH5: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > hda: WDC WD1200JB-75CRA0, ATA DISK drive > hdb: Maxtor 4D060H3, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: max request size: 128KiB > hda: Host Protected Area detected. > current capacity is 234375000 sectors (120000 MB) > native capacity is 234441648 sectors (120034 MB) > hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) > hda: cache flushes not supported > /dev/ide/host0/bus0/target0/lun0: p1 > hdb: max request size: 128KiB > hdb: 120069936 sectors (61475 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > hdb: cache flushes not supported > /dev/ide/host0/bus0/target1/lun0: p1 > Probing IDE interface ide1... > hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > Probing IDE interface ide2... > ide2: Wait for ready failed before probe ! > Probing IDE interface ide3... > ide3: Wait for ready failed before probe ! > Probing IDE interface ide4... > ide4: Wait for ready failed before probe ! > Probing IDE interface ide5... > ide5: Wait for ready failed before probe ! > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20
strange indeed, you already tried without disabling acpi? maybe something is stealing the ressources for ide driver. please send in the output for /proc/ioports both for working 2.6.9 and non working 2.6.11 thanks for your feedback. a++ maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
