Package: kernel-image-2.6.10-1-686
Version: 2.6.10-6
Severity: normal
% modprobe intelfb
results in a segmentation fault and the attached EIP
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.10-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages kernel-image-2.6.10-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.78 tools to create initrd image for p
ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo
-- no debconf information
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Dim 2400 APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=301 video=vesafb:ywrap,mtrr
noapic panic=10 devfs=nomount
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 2193.262 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x50
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 250276k/260560k available (1682k kernel code, 9760k reserved, 703k
data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4341.76 BogoMIPS (lpj=2170880)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400
00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Celeron(R) CPU 2.20GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e28)
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like
an initrd
Freeing initrd memory: 4704k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbc8f, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [EMAIL PROTECTED]
** so I can fix the driver.
pnp: 00:0a: ioport range 0x800-0x85f could not be reserved
pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved
pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices:
VBTN PCI0 USB0 USB1 USB2 PCI1 PCI2 KBD
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4704KiB [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 9 (level, low) -> IRQ 9
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6E040L0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2
Probing IDE interface ide1...
hdc: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1574360k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: [EMAIL PROTECTED]
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected 892K stolen memory.
agpgart: AGP aperture is 128M @ 0xe8000000
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0xff80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 10, io base 0xff60
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 9 (level, low) -> IRQ 9
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB
UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 9, io base 0xff40
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-2: new low speed USB device using uhci_hcd and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0
proto 2 vid 0x043D pid 0x0059
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usbcore: registered new driver hiddev
hiddev96: USB HID v1.00 Device [American Power Conversion Back-UPS 500 FW:
6.4.I USB FW: c1 ] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hw_random: RNG not detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5
Intel 810 + AC97 Audio, version 1.01, 04:20:24 Mar 11 2005
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0xedc0 and 0xee00, MEM 0xfeb7fa00 and 0xfeb7f900,
IRQ 3
i810: Intel ICH4 mmio at 0xd0a3ea00 and 0xd0a40900
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:04.0: 3Com PCI 3c905C Tornado at 0xde80. Vers LK1.1.19
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 3 (level, low) -> IRQ 3
0000:01:05.0: 3Com PCI 3c905C Tornado at 0xdf00. Vers LK1.1.19
input: PC Speaker
Real Time Clock Driver v1.12
inserting floppy driver for 2.6.10-1-686
FDC 0 is a post-1991 82077
input: PS/2 Generic Mouse on isa0060/serio1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2035 buckets, 16280 max) - 336 bytes per conntrack
NET: Registered protocol family 10
Disabled Privacy Extensions on device c032abe0(lo)
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
eth1: no IPv6 routers present
eth0: no IPv6 routers present
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 17
NET: Registered protocol family 24
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.9.2
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
intelfb: 00:02.0: Intel(R) 845G, aperture size 128MB, stolen memory 892kB
Unable to handle kernel paging request at virtual address 0000fa10
printing eip:
c01d261d
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: intelfb pppoe pppox af_packet ppp_generic slhc lp autofs4
ipt_TCPMSS ipt_MASQUERADE ipt_state iptable_filter iptable_nat ipv6
ip_conntrack ip_tables ide_cd cdrom tsdev parport_pc mousedev parport psmouse
evdev floppy rtc pcspkr 3c59x snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd
snd_page_alloc i810_audio ac97_codec soundcore i2c_i801 i2c_core pci_hotplug
usbhid usblp uhci_hcd intel_agp agpgart dm_mod capability commoncap usbkbd
usbcore ext3 jbd mbcache ide_generic atiixp pdc202xx_old cmd64x hpt366 ide_disk
generic amd74xx serverworks cs5530 ns87415 sc1200 sis5513 piix alim15x3 hpt34x
cs5520 opti621 slc90e66 cy82c693 trm290 pdc202xx_new rz1000 via82cxxx siimage
aec62xx triflex ide_core unix fbcon font bitblit vesafb cfbcopyarea cfbimgblt
cfbfillrect
CPU: 0
EIP: 0060:[<c01d261d>] Not tainted VLI
EFLAGS: 00010202 (2.6.10-1-686)
EIP is at fb_find_mode+0x13d/0x4f0
eax: c036ec31 ebx: 00000000 ecx: 00000007 edx: d0bf63bf
esi: d0bf63bc edi: 0000fa10 ebp: d0bf63bb esp: c77e9dd4
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 6835, threadinfo=c77e8000 task=ca593020)
Stack: d0bf63bb e8000001 00000004 0190d868 0000fa10 d0bf63bb 00000000 0000003c
ffffffff 00000001 0000003c 00000010 00000300 00000400 00000001 00000001
00000001 00000008 00000000 00000000 00000000 c70fc008 d0bf1e43 c70fc008
Call Trace:
[<d0bf1e43>] intelfb_init_var+0x123/0x180 [intelfb]
[<c036ec60>] modedb+0x0/0xb60
[<c036ec60>] modedb+0x0/0xb60
[<d0bf1ef8>] intelfb_set_fbinfo+0x58/0x90 [intelfb]
[<d0bf16dc>] intelfb_pci_register+0x51c/0x9a0 [intelfb]
[<c01c7542>] pci_device_probe_static+0x52/0x70
[<c01c759c>] __pci_device_probe+0x3c/0x50
[<c01c75dc>] pci_device_probe+0x2c/0x50
[<c021a0ff>] driver_probe_device+0x2f/0x80
[<c021a24c>] driver_attach+0x5c/0xa0
[<c021a79d>] bus_add_driver+0x9d/0xd0
[<c021adbf>] driver_register+0x2f/0x40
[<c01c7864>] pci_register_driver+0x64/0x90
[<d0bde036>] init_module+0x36/0x38 [intelfb]
[<c0132833>] sys_init_module+0x163/0x210
[<c01030df>] syscall_call+0x7/0xb
Code: 31 ff 89 7c 24 18 90 8d b4 26 00 00 00 00 8b 7c 24 18 8b 44 24 68 8b 3c
38 89 7c 24 10 85 ff 74 3d 89 ee 8b 4c 24 44 49 78 08 ac <ae> 75 08 84 c0 75 f5
31 c0 eb 04 19 c0 0c 01 85 c0 75 20 b9 ff
<6>usb 3-2: new full speed USB device using uhci_hcd and address 2
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: LEXAR Model: DIGITAL FILM Rev: /W1.
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb 3-2: USB disconnect, address 2
