* Florian wrote: > Norbert Tretkowski wrote: > > Hmm... what's the output of 'lspci' on your system? > > Here it is: > > 0000:00:03.0 Ethernet controller: Digital Equipment Corporation DECchip > 21142/43 (rev 30) > 0000:00:07.0 ISA bridge: Contaq Microsystems 82c693 > 0000:00:07.1 IDE interface: Contaq Microsystems 82c693 > 0000:00:07.2 IDE interface: Contaq Microsystems 82c693 > 0000:00:07.3 USB Controller: Contaq Microsystems 82c693 > 0000:00:0b.0 VGA compatible controller: Digital Equipment Corporation PBXGB > [TGA2] (rev 22) > 0000:00:14.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) > 0000:01:04.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI > (rev 05) > > This is what 2.4.27 says.
Hmm... I'm wondering why qla1280 is included... For a workaround, replace 'qlogicisp' in /usr/sbin/mkinitrd with 'qla1280' and make sure qlogicisp is not listed in /etc/mkinitrd/modules and /etc/modules. Then run the following command: mkinitrd -o /boot/initrd-2.6.8-2-generic /lib/modules/2.6.8-2-generic Reboot the system, qlogicisp shouldn't get loaded from the initrd and the system should run fine. I'll try to modify mkinitrd accordingly ASAP. Norbert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
