On Wed, 23 Feb 2005, Horms wrote: Hello,
> On Wed, Feb 23, 2005 at 05:43:16AM +0100, Florian Reitmeir wrote: > > Package: kernel-image-2.6.8-2-686 > > Version: 2.6.8-13 > > Severity: normal > > > > > > Hi, > > > > since the last upgrade i get many "scsi: unknown opcode 0x80" from the > > kernel. > > > > My only SCSI device is a 3ware 7006 IDE Raid Adapter. I use the > > smartmontools to monitor the 2 ide disks. The System seems to act > > normal (I rebooted the machine to get sure its no a-reboot-gets-it-away > > error). > > First I tried to search in google for a clue about this message, but > > i didn't find _the_ answer. > Thanks, this might be caused by the new scsi ioctl whitelist > that was added around 2.6.8. Which kernel were you upgrading from. > Is there anything in dmesg relating to this? i looked over the boot-dmesg but there is no special line/error. here a snipplet of my syslog Feb 21 15:39:08 messecenter smartd[9755]: smartd version 5.32 Copyright (C) 2002-4 Bruce Allen Feb 21 15:39:08 messecenter smartd[9755]: Home page is http://smartmontools.sourceforge.net/ Feb 21 15:39:08 messecenter smartd[9755]: Opened configuration file /etc/smartd.conf Feb 21 15:39:08 messecenter smartd[9755]: Configuration file /etc/smartd.conf parsed. Feb 21 15:39:08 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_00], opened Feb 21 15:39:08 messecenter kernel: scsi: unknown opcode 0x80 Feb 21 15:39:08 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_00], found in smartd database. Feb 21 15:39:08 messecenter kernel: scsi: unknown opcode 0x80 Feb 21 15:39:09 messecenter last message repeated 4 times Feb 21 15:39:09 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_00], is SMART capable. Adding to "monitor" list. Feb 21 15:39:09 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_01], opened Feb 21 15:39:09 messecenter kernel: scsi: unknown opcode 0x80 Feb 21 15:39:09 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_01], found in smartd database. Feb 21 15:39:09 messecenter kernel: scsi: unknown opcode 0x80 Feb 21 15:39:09 messecenter last message repeated 4 times Feb 21 15:39:10 messecenter smartd[9755]: Device: /dev/sda [3ware_disk_01], is SMART capable. Adding to "monitor" list. Feb 21 15:39:10 messecenter smartd[9755]: Monitoring 2 ATA and 0 SCSI devices Feb 21 15:39:10 messecenter kernel: scsi: unknown opcode 0x80 Feb 21 15:39:11 messecenter last message repeated 5 times Feb 21 15:39:11 messecenter smartd[9758]: smartd has fork()ed into background mode. New PID=9758. Feb 21 15:39:11 messecenter smartd[9758]: file /var/run/smartd.pid written containing PID 9758 and yes, there are no "unknown opcode 0x80" before the smartmontools are started. kernel before: kernel-image-2.6.8-1-686 now: kernel-image-2.6.8-2-686 for upgrading i use the kernel-image-2.6-686 meta package. -- Dipl.-Inf. Univ. Florian Reitmeir http://net.multi24.com/ Josef-Schweinester-Str.1 Tel: +43 526 266166 6412 St. Georgen / Austria Fax: +43 526 266166 -10 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
