Hi,
Sven Luther writes:
> Can you provide a full serial log output ?
Sure. It's attached.
> Is the panic in question one happening because it doesn't find the
> initrd, or something else ?
It doesn't find the root filesystem if I omit the root option from the
kernel command line.
> How do you boot, and with what ? Where do you create the initrd ? On
> the same box or somewhere else ? what is the size of the initrd ?
> Could you try setting the initrd options to MODULES=most or
> something such ?
I don't believe any of this is related to the problem. Anyway. The
setup is exactly the same that Hollis described in his original
report. The only thing I do manually after installing a new kernel
image package is to dd the vmlinuz file onto the PReP boot partition.
> Yeah, but let's find out why this happens.
Please keep in mind that *my* PReP system is running fine now, after
numerous bugs that I reported have been fixed. I'd rather just set
that root option, the ideal way being the bootargs patch, and then
move on to more worthwhile things.
Such as getting my recently acquired R50 and the Thinkpad 860 running :)
Regards, Jens.
loaded at: 00480410 0079F004
relocated to: 00800000 00B1EBF4
zimage at: 00805A3C 0093743B
initrd at: 00938000 00B142FF
avail ram: 00400000 00800000
Linux/PPC load: console=ttyS0 root=/dev/sda2
Uncompressing Linux...done.
Now booting the kernel
Total memory = 64MB; using 128kB for hash table (at c02e0000)
Linux version 2.6.8-powerpc ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian
1:3.3.4-9)) #1 Fri Aug 27 18:02:26 CEST 2004
PReP architecture
IBM planar ID: 000000f5
Built 1 zonelists
Kernel command line: console=ttyS0
PID hash table entries: 512 (order 9: 4096 bytes)
time_init: decrementer frequency = 16.666666 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 59824k available (1720k kernel code, 1056k data, 164k init, 0k highmem)
Calibrating delay loop... 331.77 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1904k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
NCR 53c810 rev 1 detected, setting PCI class.
Setting PCI interrupts for a "IBM 7248, PowerSeries 830/850 (Carolina)"
PCI: Cannot allocate resource region 0 of device 0000:00:0c.0
PCI: Cannot allocate resource region 0 of device 0000:00:10.0
PCI: Cannot allocate resource region 0 of device 0000:00:16.0
Thermal assist unit not available
audit: initializing netlink socket (disabled)
audit(1094627149.008:0): initialized
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pmac_zilog: 0.6 (Benjamin Herrenschmidt <[EMAIL PROTECTED]>)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: Macintosh mouse button emulation
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 164k init 60k pmac 4k chrp 8k openfirmware
initrd-tools: 0.1.73
NET: Registered protocol family 1
SCSI subsystem initialized
PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
sym0: <810> rev 0x1 at pci 0000:00:10.0 irq 15
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
Vendor: IBM Model: CDRM00203 !K Rev: BZ26
Type: CD-ROM ANSI SCSI revision: 02
scsi(0:0:3:0): Beginning Domain Validation
sym0:3: FAST-10 SCSI 5.0 MB/s ST (200.0 ns, offset 8)
scsi(0:0:3:0): Domain Validation skipping write tests
scsi(0:0:3:0): Ending Domain Validation
sym0:6: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
Vendor: IBM Model: DFHSS2F !d Rev: 1717
Type: Direct-Access ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:6:0): Beginning Domain Validation
sym0:6: asynchronous.
sym0:6: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
scsi(0:0:6:0): Domain Validation skipping write tests
scsi(0:0:6:0): Ending Domain Validation
SCSI device sda: 4404489 512-byte hdwr sectors (2255 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target6/lun0: p1 p2 p3
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS: bad magic number
XFS: SB validate failed
cramfs: wrong magic
XFS: bad magic number
XFS: SB validate failed
cramfs: wrong magic
pivot_root: No sKernel panic: Attempted to kill init!
uch file or dire ctory
/sbin/ini<0>Rebooting in 180 seconds..t: 426: cannot open dev/console: No such
file
--
J'qbpbe, le m'en fquz pe j'qbpbe!
Le veux aimeb et mqubib panz je pézqbpbe je djuz tqtaj!
