Your message dated Sun, 29 Aug 2004 22:22:18 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Cannot configure network on sarge install
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--------------------------------------
Received: (at submit) by bugs.debian.org; 18 Nov 2003 19:56:42 +0000
>From [EMAIL PROTECTED] Tue Nov 18 13:56:39 2003
Return-path: <[EMAIL PROTECTED]>
Received: from extsendmail1.cingular.com (smtp.cingular.com) [170.35.241.101]
by master.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1AMBxn-0007GH-00; Tue, 18 Nov 2003 13:56:39 -0600
Received: from intsendmail1.bscc.bls.com (intsendmail1 [30.2.67.4])
by smtp.cingular.com (8.12.10/8.12.6) with ESMTP id hAIJucjm027194
for <[EMAIL PROTECTED]>; Tue, 18 Nov 2003 14:56:38 -0500 (EST)
Received: from S30342g017042 (s30342g017042.bscc.bls.com [30.3.4.103])
by intsendmail1.bscc.bls.com (8.12.10/8.12.6) with ESMTP id
hAIJucop012473
for <[EMAIL PROTECTED]>; Tue, 18 Nov 2003 14:56:38 -0500 (EST)
Received: from S30342G004100.bscc.bls.com ([30.3.4.119]) by 30.3.4.103 with
InterScan Messaging Security Suite; Tue, 18 Nov 2003 14:56:39 -0500
Received: by s30342g004100.bscc.bls.com with Internet Mail Service (5.5.2657.72)
id <W6TS7CAH>; Tue, 18 Nov 2003 14:56:37 -0500
Message-ID: <[EMAIL PROTECTED]>
From: "Seefried, Ken" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Subject: Cannot configure network on sarge install
Date: Tue, 18 Nov 2003 14:56:35 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2657.72)
Content-Type: multipart/alternative;
boundary="----_=_NextPart_001_01C3AE0E.1275A1A0"
Delivered-To: [EMAIL PROTECTED]
X-Spam-Status: No, hits=0.5 required=4.0
tests=HAS_PACKAGE,HTML_20_30,HTML_MESSAGE
version=2.53-bugs.debian.org_2003_11_15
X-Spam-Level:
X-Spam-Checker-Version: SpamAssassin 2.53-bugs.debian.org_2003_11_15
(1.174.2.15-2003-03-30-exp)
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C3AE0E.1275A1A0
Content-Type: text/plain;
charset="iso-8859-1"
Package: installation
Version: sarge/testing
Platform is Intel PR440FX, dual PPro 200/512, 2 x Intel i82557 ethernet
controllers.
1) Boot Sarge netinstall cd downloaded 11/18/2003.
2) Run through install screens through loading components of Debian
installer->detecting hardware->load modules.
3) Immediately after the load modules screen clears, I get a screen that
says "Feel free to retry" & "continue".
4) Hit continue. Trying to manually configure network either statically or
through DHCP results in "Feel free to retry".
Lsmod shows e100 module loaded: e100 40968 0 (unused)
Attempt to insmod e100 results in "A module named e100 already exists"
Ifconfig -a shows unconfigured eth0 & eth1 interfaces
Please find attached an lspci & dmesg from the Linux (non-Debian) install
currently on the box.
P.S. - The curses screen with the error is incorrectly draw as well. The
right side of the dialog box is broken.
-----
lspci -v -v
-----
00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ffbec000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ef80 [size=32]
Region 2: Memory at fed00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at ffa0 [size=16]
00:09.0 SCSI storage controller: Adaptec AIC-7880U
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at ffbed000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0b.0 RAID bus controller: Mylex Corporation DAC960PD (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 (1000ns min), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at fc80 [size=128]
Region 1: Memory at ffbefc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=32K]
00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (2000ns min, 14000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ffbee000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at ff80 [size=32]
Region 2: Memory at ff800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
00:11.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if
00 [VGA])
Subsystem: S3 Inc. ViRGE/DX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 40 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
-----
dmesg (from SuSE)
-----
Linux version 2.4.20-64GB-SMP ([EMAIL PROTECTED]) (gcc version 3.3
20030226 (prerelease) (SuSE Linux)) #1 SMP Wed Aug 6 18:30:02 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec09000 (reserved)
BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
0MB HIGHMEM available.
256MB LOWMEM available.
ACPI: have wakeup address 0xc0002000
found SMP MP-table at 000f7ef0
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 98 and too old
You can enable it with acpi=force
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: PR440FX APIC at: 0xFEC08000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #12 Pentium(tm) Pro APIC version 17
I/O APIC #13 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Building zonelist for node : 0
Kernel command line: root=/dev/rd/c0d0p3 vga=0x314 splash=silent showopts
bootsplash: silent mode.
Initializing CPU#0
Detected 198.669 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 396.49 BogoMIPS
Memory: 252392k/262144k available (1856k kernel code, 7188k reserved, 592k
data, 184k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
CPU0: Intel Pentium Pro stepping 07
per-CPU timeslice cutoff: 1467.70 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/12 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 396.49 BogoMIPS
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
CPU1: Intel Pentium Pro stepping 07
Total of 2 processors activated (792.98 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 13-0, 13-2, 13-10, 13-11, 13-13, 13-19, 13-20, 13-21,
13-22, 13-23 not connected.
..TIMER: vector=0x31 pin1=-1 pin2=0
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 17.
number of IO-APIC #13 registers: 24.
testing the IO APIC.......................
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 0 0 0 0 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 0 0 0 0 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 79
0d 000 00 1 0 0 0 0 0 0 00
0e 003 03 0 0 0 0 0 1 1 81
0f 003 03 0 0 0 0 0 1 1 89
10 003 03 1 1 0 1 0 1 1 91
11 003 03 1 1 0 1 0 1 1 99
12 003 03 1 1 0 1 0 1 1 A1
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 198.6570 MHz.
..... host bus clock speed is 66.2187 MHz.
cpu: 0, clocks: 662187, slice: 220729
CPU0<T0:662176,T1:441440,D:7,S:220729,C:662187>
cpu: 1, clocks: 662187, slice: 220729
CPU1<T0:662176,T1:220704,D:14,S:220729,C:662187>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
ACPI: Subsystem revision 20030228
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfda11, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI->APIC IRQ transform: (B0,I6,P0) -> 18
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I11,P0) -> 16
PCI->APIC IRQ transform: (B0,I15,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 18
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 16384
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xf8000000, mapped to 0xd080d000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:5b6a
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture... no good signature found.
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
hda: CRD-8320B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 549k freed
VFS: Mounted root (ext2 filesystem).
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.29
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
blk: queue c14ce618, I/O limit 4095Mb (mask 0xffffffff)
DAC960: ***** DAC960 RAID Driver Version 2.4.20aa1 of 4 December 2002 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <[EMAIL PROTECTED]>
DAC960#0: Configuring Mylex DAC960PL PCI RAID Controller
DAC960#0: Firmware Version: 3.52-0-02, Channels: 2, Memory Size: 16MB
DAC960#0: PCI Bus: 0, Device: 11, Function: 0, I/O Address: 0xFC80
DAC960#0: PCI Address: 0xFFBEFC00 mapped at 0xD0C10C00, IRQ Channel: 16
DAC960#0: Controller Queue Depth: 64, Maximum Blocks per Command: 128
DAC960#0: Driver Queue Depth: 63, Scatter/Gather Limit: 17 of 17 Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: SEAGATE Model: ST34573W Revision: 6244
DAC960#0: Serial Number: LN80937300007914HKCS
DAC960#0: Disk Status: Online, 8888320 blocks
DAC960#0: 1:1 Vendor: SEAGATE Model: ST34573W Revision: 6244
DAC960#0: Serial Number: LN80919600007922H612
DAC960#0: Disk Status: Online, 8888320 blocks
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-0, Online, 17776640 blocks, Write Thru
Partition check:
rd/c0d0: rd/c0d0p1 rd/c0d0p2 rd/c0d0p3
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (dac960(48,3)) for (dac960(48,3))
Warning, log replay starting on readonly filesystem
reiserfs: replayed 2 transactions in 3 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 184k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 658656k swap-space (priority 42)
Intel(R) PRO/100 Network Driver - version 2.1.29-k3
Copyright (c) 2002 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) 8255x-based Ethernet Adapter
e100: selftest OK.
e100: eth1: Intel(R) 8255x-based Ethernet Adapter
e100: eth0 NIC Link is Up 100 Mbps Half duplex
raw1394: /dev/raw1394 device initialized
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: Card 'CS4236B Audio'
isapnp: 1 Plug & Play card detected total
eth0: no IPv6 routers present
------_=_NextPart_001_01C3AE0E.1275A1A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3DUS-ASCII">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2653.12">
<TITLE>Cannot configure network on sarge install</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2>Package: installation</FONT>
<BR><FONT SIZE=3D2>Version: sarge/testing</FONT>
</P>
<P><FONT SIZE=3D2>Platform is Intel PR440FX, dual PPro 200/512, 2 x =
Intel i82557 ethernet controllers.</FONT>
</P>
<P><FONT SIZE=3D2>1) Boot Sarge netinstall cd downloaded =
11/18/2003.</FONT>
<BR><FONT SIZE=3D2>2) Run through install screens through loading =
components of Debian installer->detecting hardware->load =
modules.</FONT>
<BR><FONT SIZE=3D2>3) Immediately after the load modules screen clears, =
I get a screen that says "Feel free to retry" & =
"continue".</FONT>
<BR><FONT SIZE=3D2>4) Hit continue. Trying to manually configure =
network either statically or through DHCP results in "Feel free to =
retry".</FONT></P>
<P><FONT SIZE=3D2>Lsmod shows e100 module loaded: e100 40968 0 =
(unused)</FONT>
<BR><FONT SIZE=3D2>Attempt to insmod e100 results in "A module =
named e100 already exists"</FONT>
<BR><FONT SIZE=3D2>Ifconfig -a shows unconfigured eth0 & eth1 =
interfaces</FONT>
</P>
<P><FONT SIZE=3D2>Please find attached an lspci & dmesg from the =
Linux (non-Debian) install currently on the box.</FONT>
</P>
<P><FONT SIZE=3D2>P.S. - The curses screen with the error is =
incorrectly draw as well. The right side of the dialog box is =
broken.</FONT>
</P>
<P><FONT SIZE=3D2>-----</FONT>
</P>
<P><FONT SIZE=3D2>lspci -v -v</FONT>
</P>
<P><FONT SIZE=3D2>-----</FONT>
</P>
<P><FONT SIZE=3D2>00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC =
[Natoma] (rev 02)</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- =
SERR+ FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort+ >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
32</FONT>
</P>
<P><FONT SIZE=3D2>00:06.0 Ethernet controller: Intel Corp. 82557/8/9 =
[Ethernet Pro 100] (rev 02)</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- =
SERR+ FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
72 (2000ns min, 14000ns max)</FONT>
<BR> <FONT =
SIZE=3D2>Interrupt: pin A routed to IRQ 18</FONT>
<BR> <FONT SIZE=3D2>Region 0: =
Memory at ffbec000 (32-bit, prefetchable) [size=3D4K]</FONT>
<BR> <FONT SIZE=3D2>Region 1: =
I/O ports at ef80 [size=3D32]</FONT>
<BR> <FONT SIZE=3D2>Region 2: =
Memory at fed00000 (32-bit, non-prefetchable) [size=3D1M]</FONT>
<BR> <FONT SIZE=3D2>Expansion =
ROM at <unassigned> [disabled] [size=3D1M]</FONT>
</P>
<P><FONT SIZE=3D2>00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA =
[Natoma/Triton II] (rev 01)</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- =
SERR- FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
0</FONT>
</P>
<P><FONT SIZE=3D2>00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE =
[Natoma/Triton II] (prog-if 80 [Master])</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- =
SERR- FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
32</FONT>
<BR> <FONT SIZE=3D2>Region 4: =
I/O ports at ffa0 [size=3D16]</FONT>
</P>
<P><FONT SIZE=3D2>00:09.0 SCSI storage controller: Adaptec =
AIC-7880U</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- =
SERR+ FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
72 (2000ns min, 2000ns max), cache line size 08</FONT>
<BR> <FONT =
SIZE=3D2>Interrupt: pin A routed to IRQ 17</FONT>
<BR> <FONT SIZE=3D2>Region 0: =
I/O ports at f800 [disabled] [size=3D256]</FONT>
<BR> <FONT SIZE=3D2>Region 1: =
Memory at ffbed000 (32-bit, non-prefetchable) [size=3D4K]</FONT>
<BR> <FONT SIZE=3D2>Expansion =
ROM at <unassigned> [disabled] [size=3D64K]</FONT>
</P>
<P><FONT SIZE=3D2>00:0b.0 RAID bus controller: Mylex Corporation =
DAC960PD (rev 02)</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- =
SERR+ FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
40 (1000ns min), cache line size 08</FONT>
<BR> <FONT =
SIZE=3D2>Interrupt: pin A routed to IRQ 16</FONT>
<BR> <FONT SIZE=3D2>Region 0: =
I/O ports at fc80 [size=3D128]</FONT>
<BR> <FONT SIZE=3D2>Region 1: =
Memory at ffbefc00 (32-bit, non-prefetchable) [size=3D128]</FONT>
<BR> <FONT SIZE=3D2>Expansion =
ROM at <unassigned> [disabled] [size=3D32K]</FONT>
</P>
<P><FONT SIZE=3D2>00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 =
[Ethernet Pro 100] (rev 01)</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- =
SERR+ FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
72 (2000ns min, 14000ns max)</FONT>
<BR> <FONT =
SIZE=3D2>Interrupt: pin A routed to IRQ 17</FONT>
<BR> <FONT SIZE=3D2>Region 0: =
Memory at ffbee000 (32-bit, prefetchable) [size=3D4K]</FONT>
<BR> <FONT SIZE=3D2>Region 1: =
I/O ports at ff80 [size=3D32]</FONT>
<BR> <FONT SIZE=3D2>Region 2: =
Memory at ff800000 (32-bit, non-prefetchable) [size=3D1M]</FONT>
<BR> <FONT SIZE=3D2>Expansion =
ROM at <unassigned> [disabled] [size=3D1M]</FONT>
</P>
<P><FONT SIZE=3D2>00:11.0 VGA compatible controller: S3 Inc. ViRGE/DX =
or /GX (rev 01) (prog-if 00 [VGA])</FONT>
<BR> <FONT =
SIZE=3D2>Subsystem: S3 Inc. ViRGE/DX</FONT>
<BR> <FONT SIZE=3D2>Control: =
I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- =
SERR- FastB2B-</FONT>
<BR> <FONT SIZE=3D2>Status: =
Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- =
<TAbort- <MAbort- >SERR- <PERR-</FONT>
<BR> <FONT SIZE=3D2>Latency: =
40 (1000ns min, 63750ns max)</FONT>
<BR> <FONT =
SIZE=3D2>Interrupt: pin A routed to IRQ 18</FONT>
<BR> <FONT SIZE=3D2>Region 0: =
Memory at f8000000 (32-bit, non-prefetchable) [size=3D64M]</FONT>
<BR> <FONT SIZE=3D2>Expansion =
ROM at <unassigned> [disabled] [size=3D64K]</FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=3D2>-----</FONT>
</P>
<P><FONT SIZE=3D2>dmesg (from SuSE)</FONT>
</P>
<P><FONT SIZE=3D2>-----</FONT>
</P>
<P><FONT SIZE=3D2>Linux version 2.4.20-64GB-SMP ([EMAIL PROTECTED]) =
(gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 SMP Wed Aug 6 =
18:30:02 UTC 2003</FONT></P>
<P><FONT SIZE=3D2>BIOS-provided physical RAM map:</FONT>
<BR><FONT SIZE=3D2> BIOS-e820: 0000000000000000 - 000000000009fc00 =
(usable)</FONT>
<BR><FONT SIZE=3D2> BIOS-e820: 0000000000100000 - 0000000010000000 =
(usable)</FONT>
<BR><FONT SIZE=3D2> BIOS-e820: 00000000fec00000 - 00000000fec09000 =
(reserved)</FONT>
<BR><FONT SIZE=3D2> BIOS-e820: 00000000ffe80000 - 0000000100000000 =
(reserved)</FONT>
<BR><FONT SIZE=3D2>Scanning bios EBDA for MXT signature</FONT>
<BR><FONT SIZE=3D2>0MB HIGHMEM available.</FONT>
<BR><FONT SIZE=3D2>256MB LOWMEM available.</FONT>
<BR><FONT SIZE=3D2>ACPI: have wakeup address 0xc0002000</FONT>
<BR><FONT SIZE=3D2>found SMP MP-table at 000f7ef0</FONT>
<BR><FONT SIZE=3D2>hm, page 000f7000 reserved twice.</FONT>
<BR><FONT SIZE=3D2>hm, page 000f8000 reserved twice.</FONT>
<BR><FONT SIZE=3D2>hm, page 000f7000 reserved twice.</FONT>
<BR><FONT SIZE=3D2>hm, page 000f8000 reserved twice.</FONT>
<BR><FONT SIZE=3D2>On node 0 totalpages: 65536</FONT>
<BR><FONT SIZE=3D2>zone(0): 4096 pages.</FONT>
<BR><FONT SIZE=3D2>zone(1): 61440 pages.</FONT>
<BR><FONT SIZE=3D2>zone(2): 0 pages.</FONT>
<BR><FONT SIZE=3D2>ACPI disabled because your bios is from 98 and too =
old</FONT>
<BR><FONT SIZE=3D2>You can enable it with acpi=3Dforce</FONT>
<BR><FONT SIZE=3D2>Intel MultiProcessor Specification v1.4</FONT>
<BR><FONT SIZE=3D2> Virtual Wire compatibility =
mode.</FONT>
<BR><FONT SIZE=3D2>OEM ID: INTEL Product ID: =
PR440FX APIC at: 0xFEC08000</FONT>
<BR><FONT SIZE=3D2>Processor #0 Pentium(tm) Pro APIC version 17</FONT>
<BR><FONT SIZE=3D2>Processor #12 Pentium(tm) Pro APIC version 17</FONT>
<BR><FONT SIZE=3D2>I/O APIC #13 Version 17 at 0xFEC00000.</FONT>
<BR><FONT SIZE=3D2>Enabling APIC mode: =
Flat. Using 1 I/O APICs</FONT>
<BR><FONT SIZE=3D2>Processors: 2</FONT>
<BR><FONT SIZE=3D2>Building zonelist for node : 0</FONT>
<BR><FONT SIZE=3D2>Kernel command line: root=3D/dev/rd/c0d0p3 =
vga=3D0x314 splash=3Dsilent showopts</FONT>
<BR><FONT SIZE=3D2>bootsplash: silent mode.</FONT>
<BR><FONT SIZE=3D2>Initializing CPU#0</FONT>
<BR><FONT SIZE=3D2>Detected 198.669 MHz processor.</FONT>
<BR><FONT SIZE=3D2>Console: colour dummy device 80x25</FONT>
<BR><FONT SIZE=3D2>Calibrating delay loop... 396.49 BogoMIPS</FONT>
<BR><FONT SIZE=3D2>Memory: 252392k/262144k available (1856k kernel =
code, 7188k reserved, 592k data, 184k init, 0k highmem)</FONT>
<BR><FONT SIZE=3D2>Dentry cache hash table entries: 32768 (order: 6, =
262144 bytes)</FONT>
<BR><FONT SIZE=3D2>Inode cache hash table entries: 16384 (order: 5, =
131072 bytes)</FONT>
<BR><FONT SIZE=3D2>Mount cache hash table entries: 512 (order: 0, 4096 =
bytes)</FONT>
<BR><FONT SIZE=3D2>Buffer-cache hash table entries: 16384 (order: 4, =
65536 bytes)</FONT>
<BR><FONT SIZE=3D2>Page-cache hash table entries: 65536 (order: 6, =
262144 bytes)</FONT>
<BR><FONT SIZE=3D2>CPU: L1 I cache: 8K, L1 D cache: 8K</FONT>
<BR><FONT SIZE=3D2>CPU: L2 cache: 512K</FONT>
<BR><FONT SIZE=3D2>Intel machine check architecture supported.</FONT>
<BR><FONT SIZE=3D2>Intel machine check reporting enabled on =
CPU#0.</FONT>
<BR><FONT SIZE=3D2>CPU: After generic, caps: =
0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT =
SIZE=3D2>CPU:  =
; Common caps: 0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT SIZE=3D2>Checking 'hlt' instruction... OK.</FONT>
<BR><FONT SIZE=3D2>POSIX conformance testing by UNIFIX</FONT>
<BR><FONT SIZE=3D2>mtrr: v1.40 (20010327) Richard Gooch =
([EMAIL PROTECTED])</FONT>
<BR><FONT SIZE=3D2>mtrr: detected mtrr type: Intel</FONT>
<BR><FONT SIZE=3D2>CPU: L1 I cache: 8K, L1 D cache: 8K</FONT>
<BR><FONT SIZE=3D2>CPU: L2 cache: 512K</FONT>
<BR><FONT SIZE=3D2>Intel machine check reporting enabled on =
CPU#0.</FONT>
<BR><FONT SIZE=3D2>CPU: After generic, caps: =
0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT =
SIZE=3D2>CPU:  =
; Common caps: 0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT SIZE=3D2>CPU0: Intel Pentium Pro stepping 07</FONT>
<BR><FONT SIZE=3D2>per-CPU timeslice cutoff: 1467.70 usecs.</FONT>
<BR><FONT SIZE=3D2>task migration cache decay timeout: 10 msecs.</FONT>
<BR><FONT SIZE=3D2>enabled ExtINT on CPU#0</FONT>
<BR><FONT SIZE=3D2>ESR value before enabling vector: 00000040</FONT>
<BR><FONT SIZE=3D2>ESR value after enabling vector: 00000000</FONT>
<BR><FONT SIZE=3D2>Booting processor 1/12 eip 3000</FONT>
<BR><FONT SIZE=3D2>Initializing CPU#1</FONT>
<BR><FONT SIZE=3D2>masked ExtINT on CPU#1</FONT>
<BR><FONT SIZE=3D2>ESR value before enabling vector: 00000000</FONT>
<BR><FONT SIZE=3D2>ESR value after enabling vector: 00000000</FONT>
<BR><FONT SIZE=3D2>Calibrating delay loop... 396.49 BogoMIPS</FONT>
<BR><FONT SIZE=3D2>CPU: L1 I cache: 8K, L1 D cache: 8K</FONT>
<BR><FONT SIZE=3D2>CPU: L2 cache: 512K</FONT>
<BR><FONT SIZE=3D2>Intel machine check reporting enabled on =
CPU#1.</FONT>
<BR><FONT SIZE=3D2>CPU: After generic, caps: =
0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT =
SIZE=3D2>CPU:  =
; Common caps: 0000fbff 00000000 00000000 00000000</FONT>
<BR><FONT SIZE=3D2>CPU1: Intel Pentium Pro stepping 07</FONT>
<BR><FONT SIZE=3D2>Total of 2 processors activated (792.98 =
BogoMIPS).</FONT>
<BR><FONT SIZE=3D2>ENABLING IO-APIC IRQs</FONT>
<BR><FONT SIZE=3D2>Setting 13 in the phys_id_present_map</FONT>
<BR><FONT SIZE=3D2>...changing IO-APIC physical APIC ID to 13 ... =
ok.</FONT>
<BR><FONT SIZE=3D2>init IO_APIC IRQs</FONT>
<BR><FONT SIZE=3D2> IO-APIC (apicid-pin) 13-0, 13-2, 13-10, 13-11, =
13-13, 13-19, 13-20, 13-21, 13-22, 13-23 not connected.</FONT>
<BR><FONT SIZE=3D2>..TIMER: vector=3D0x31 pin1=3D-1 pin2=3D0</FONT>
<BR><FONT SIZE=3D2>...trying to set up timer (IRQ0) through the 8259A =
... </FONT>
<BR><FONT SIZE=3D2>..... (found pin 0) ...works.</FONT>
<BR><FONT SIZE=3D2>number of MP IRQ sources: 17.</FONT>
<BR><FONT SIZE=3D2>number of IO-APIC #13 registers: 24.</FONT>
<BR><FONT SIZE=3D2>testing the IO APIC.......................</FONT>
</P>
<P><FONT SIZE=3D2>IO APIC #13......</FONT>
<BR><FONT SIZE=3D2>.... register #00: 0D000000</FONT>
<BR><FONT SIZE=3D2>....... : physical APIC id: =
0D</FONT>
<BR><FONT SIZE=3D2>.... register #01: 00170011</FONT>
<BR><FONT SIZE=3D2>....... : max redirection =
entries: 0017</FONT>
<BR><FONT SIZE=3D2>....... : PRQ implemented: =
0</FONT>
<BR><FONT SIZE=3D2>....... : IO APIC version: =
0011</FONT>
<BR><FONT SIZE=3D2>.... register #02: 00000000</FONT>
<BR><FONT SIZE=3D2>....... : arbitration: =
00</FONT>
<BR><FONT SIZE=3D2>.... IRQ redirection table:</FONT>
<BR><FONT SIZE=3D2> NR Log Phy Mask Trig IRR Pol Stat Dest Deli =
Vect: </FONT>
<BR><FONT SIZE=3D2> 00 003 03 0 =
0 0 0 0 =
1 1 31</FONT>
<BR><FONT SIZE=3D2> 01 003 03 0 =
0 0 0 0 =
1 1 39</FONT>
<BR><FONT SIZE=3D2> 02 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 03 003 03 0 =
0 0 0 0 =
1 1 41</FONT>
<BR><FONT SIZE=3D2> 04 003 03 0 =
0 0 0 0 =
1 1 49</FONT>
<BR><FONT SIZE=3D2> 05 003 03 0 =
0 0 0 0 =
1 1 51</FONT>
<BR><FONT SIZE=3D2> 06 003 03 0 =
0 0 0 0 =
1 1 59</FONT>
<BR><FONT SIZE=3D2> 07 003 03 0 =
0 0 0 0 =
1 1 61</FONT>
<BR><FONT SIZE=3D2> 08 003 03 0 =
0 0 0 0 =
1 1 69</FONT>
<BR><FONT SIZE=3D2> 09 003 03 0 =
0 0 0 0 =
1 1 71</FONT>
<BR><FONT SIZE=3D2> 0a 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 0b 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 0c 003 03 0 =
0 0 0 0 =
1 1 79</FONT>
<BR><FONT SIZE=3D2> 0d 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 0e 003 03 0 =
0 0 0 0 =
1 1 81</FONT>
<BR><FONT SIZE=3D2> 0f 003 03 0 =
0 0 0 0 =
1 1 89</FONT>
<BR><FONT SIZE=3D2> 10 003 03 1 =
1 0 1 0 =
1 1 91</FONT>
<BR><FONT SIZE=3D2> 11 003 03 1 =
1 0 1 0 =
1 1 99</FONT>
<BR><FONT SIZE=3D2> 12 003 03 1 =
1 0 1 0 =
1 1 A1</FONT>
<BR><FONT SIZE=3D2> 13 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 14 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 15 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 16 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2> 17 000 00 1 =
0 0 0 0 =
0 0 00</FONT>
<BR><FONT SIZE=3D2>IRQ to pin mappings:</FONT>
<BR><FONT SIZE=3D2>IRQ0 -> 0:0</FONT>
<BR><FONT SIZE=3D2>IRQ1 -> 0:1</FONT>
<BR><FONT SIZE=3D2>IRQ3 -> 0:3</FONT>
<BR><FONT SIZE=3D2>IRQ4 -> 0:4</FONT>
<BR><FONT SIZE=3D2>IRQ5 -> 0:5</FONT>
<BR><FONT SIZE=3D2>IRQ6 -> 0:6</FONT>
<BR><FONT SIZE=3D2>IRQ7 -> 0:7</FONT>
<BR><FONT SIZE=3D2>IRQ8 -> 0:8</FONT>
<BR><FONT SIZE=3D2>IRQ9 -> 0:9</FONT>
<BR><FONT SIZE=3D2>IRQ12 -> 0:12</FONT>
<BR><FONT SIZE=3D2>IRQ14 -> 0:14</FONT>
<BR><FONT SIZE=3D2>IRQ15 -> 0:15</FONT>
<BR><FONT SIZE=3D2>IRQ16 -> 0:16</FONT>
<BR><FONT SIZE=3D2>IRQ17 -> 0:17</FONT>
<BR><FONT SIZE=3D2>IRQ18 -> 0:18</FONT>
<BR><FONT SIZE=3D2>.................................... done.</FONT>
<BR><FONT SIZE=3D2>Using local APIC timer interrupts.</FONT>
<BR><FONT SIZE=3D2>calibrating APIC timer ...</FONT>
<BR><FONT SIZE=3D2>..... CPU clock speed is 198.6570 MHz.</FONT>
<BR><FONT SIZE=3D2>..... host bus clock speed is 66.2187 MHz.</FONT>
<BR><FONT SIZE=3D2>cpu: 0, clocks: 662187, slice: 220729</FONT>
<BR><FONT =
SIZE=3D2>CPU0<T0:662176,T1:441440,D:7,S:220729,C:662187></FONT>
<BR><FONT SIZE=3D2>cpu: 1, clocks: 662187, slice: 220729</FONT>
<BR><FONT =
SIZE=3D2>CPU1<T0:662176,T1:220704,D:14,S:220729,C:662187></FONT>
<BR><FONT SIZE=3D2>checking TSC synchronization across CPUs: =
passed.</FONT>
<BR><FONT SIZE=3D2>migration_task 0 on cpu=3D0</FONT>
<BR><FONT SIZE=3D2>migration_task 1 on cpu=3D1</FONT>
<BR><FONT SIZE=3D2>ACPI: Subsystem revision 20030228</FONT>
<BR><FONT SIZE=3D2>ACPI: Disabled via command line (acpi=3Doff)</FONT>
<BR><FONT SIZE=3D2>PCI: PCI BIOS revision 2.10 entry at 0xfda11, last =
bus=3D0</FONT>
<BR><FONT SIZE=3D2>PCI: Using configuration type 1</FONT>
<BR><FONT SIZE=3D2>PCI: Probing PCI hardware</FONT>
<BR><FONT SIZE=3D2>PCI: ACPI tables contain no PCI IRQ routing =
entries</FONT>
<BR><FONT SIZE=3D2>PCI: Probing PCI hardware (bus 00)</FONT>
<BR><FONT SIZE=3D2>PCI->APIC IRQ transform: (B0,I6,P0) -> =
18</FONT>
<BR><FONT SIZE=3D2>PCI->APIC IRQ transform: (B0,I9,P0) -> =
17</FONT>
<BR><FONT SIZE=3D2>PCI->APIC IRQ transform: (B0,I11,P0) -> =
16</FONT>
<BR><FONT SIZE=3D2>PCI->APIC IRQ transform: (B0,I15,P0) -> =
17</FONT>
<BR><FONT SIZE=3D2>PCI->APIC IRQ transform: (B0,I17,P0) -> =
18</FONT>
<BR><FONT SIZE=3D2>Limiting direct PCI/PCI transfers.</FONT>
<BR><FONT SIZE=3D2>Activating ISA DMA hang workarounds.</FONT>
<BR><FONT SIZE=3D2>Linux NET4.0 for Linux 2.4</FONT>
<BR><FONT SIZE=3D2>Based upon Swansea University Computer Society =
NET3.039</FONT>
<BR><FONT SIZE=3D2>Initializing RT netlink socket</FONT>
<BR><FONT SIZE=3D2>apm: BIOS not found.</FONT>
<BR><FONT SIZE=3D2>mxt_scan_bios: enter</FONT>
<BR><FONT SIZE=3D2>Starting kswapd</FONT>
<BR><FONT SIZE=3D2>bigpage subsystem: allocated 0 bigpages =
(=3D0MB).</FONT>
<BR><FONT SIZE=3D2>kinoded started</FONT>
<BR><FONT SIZE=3D2>VFS: Disk quotas vdquot_6.5.1</FONT>
<BR><FONT SIZE=3D2>aio_setup: num_physpages =3D 16384</FONT>
<BR><FONT SIZE=3D2>aio_setup: sizeof(struct page) =3D 48</FONT>
<BR><FONT SIZE=3D2>vesafb: framebuffer at 0xf8000000, mapped to =
0xd080d000, size 4096k</FONT>
<BR><FONT SIZE=3D2>vesafb: mode is 800x600x16, linelength=3D1600, =
pages=3D3</FONT>
<BR><FONT SIZE=3D2>vesafb: protected mode interface info at =
c000:5b6a</FONT>
<BR><FONT SIZE=3D2>vesafb: scrolling: redraw</FONT>
<BR><FONT SIZE=3D2>vesafb: directcolor: size=3D0:5:6:5, =
shift=3D0:11:5:0</FONT>
<BR><FONT SIZE=3D2>Looking for splash picture... no good signature =
found.</FONT>
<BR><FONT SIZE=3D2>Console: switching to colour frame buffer device =
100x37</FONT>
<BR><FONT SIZE=3D2>fb0: VESA VGA frame buffer device</FONT>
<BR><FONT SIZE=3D2>pty: 256 Unix98 ptys configured</FONT>
<BR><FONT SIZE=3D2>Serial driver version 5.05c (2001-07-08) with HUB-6 =
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled</FONT>
<BR><FONT SIZE=3D2>ttyS00 at 0x03f8 (irq =3D 4) is a 16550A</FONT>
<BR><FONT SIZE=3D2>ttyS01 at 0x02f8 (irq =3D 3) is a 16550A</FONT>
<BR><FONT SIZE=3D2>Real Time Clock Driver v1.10e</FONT>
<BR><FONT SIZE=3D2>Floppy drive(s): fd0 is 1.44M</FONT>
<BR><FONT SIZE=3D2>FDC 0 is a National Semiconductor PC87306</FONT>
<BR><FONT SIZE=3D2>RAMDISK driver initialized: 16 RAM disks of 64000K =
size 1024 blocksize</FONT>
<BR><FONT SIZE=3D2>loop: loaded (max 16 devices)</FONT>
<BR><FONT SIZE=3D2>Uniform Multi-Platform E-IDE driver Revision: =
7.00beta-2.4</FONT>
<BR><FONT SIZE=3D2>ide: Assuming 33MHz system bus speed for PIO modes; =
override with idebus=3Dxx</FONT>
<BR><FONT SIZE=3D2>PIIX3: IDE controller at PCI slot 00:07.1</FONT>
<BR><FONT SIZE=3D2>PIIX3: chipset revision 0</FONT>
<BR><FONT SIZE=3D2>PIIX3: not 100% native mode: will probe irqs =
later</FONT>
<BR><FONT SIZE=3D2> ide0: BM-DMA at 0xffa0-0xffa7, =
BIOS settings: hda:DMA, hdb:pio</FONT>
<BR><FONT SIZE=3D2>hda: CRD-8320B, ATAPI CD/DVD-ROM drive</FONT>
<BR><FONT SIZE=3D2>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14</FONT>
<BR><FONT SIZE=3D2>ide-floppy driver 0.99.newide</FONT>
<BR><FONT SIZE=3D2>ide-floppy driver 0.99.newide</FONT>
<BR><FONT SIZE=3D2>SCSI subsystem driver Revision: 1.00</FONT>
<BR><FONT SIZE=3D2>kmod: failed to exec /sbin/modprobe -s -k =
scsi_hostadapter, errno =3D 2</FONT>
<BR><FONT SIZE=3D2>md: md driver 0.90.0 MAX_MD_DEVS=3D256, =
MD_SB_DISKS=3D27</FONT>
<BR><FONT SIZE=3D2>md: Autodetecting RAID arrays.</FONT>
<BR><FONT SIZE=3D2>md: autorun ...</FONT>
<BR><FONT SIZE=3D2>md: ... autorun DONE.</FONT>
<BR><FONT SIZE=3D2>NET4: Linux TCP/IP 1.0 for NET4.0</FONT>
<BR><FONT SIZE=3D2>IP Protocols: ICMP, UDP, TCP, IGMP</FONT>
<BR><FONT SIZE=3D2>IP: routing cache hash table of 2048 buckets, =
16Kbytes</FONT>
<BR><FONT SIZE=3D2>TCP: Hash tables configured (established 16384 bind =
16384)</FONT>
<BR><FONT SIZE=3D2>Linux IP multicast router 0.06 plus PIM-SM</FONT>
<BR><FONT SIZE=3D2>NET4: Unix domain sockets 1.0/SMP for Linux =
NET4.0.</FONT>
<BR><FONT SIZE=3D2>RAMDISK: Compressed image found at block 0</FONT>
<BR><FONT SIZE=3D2>Freeing initrd memory: 549k freed</FONT>
<BR><FONT SIZE=3D2>VFS: Mounted root (ext2 filesystem).</FONT>
<BR><FONT SIZE=3D2>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA =
DRIVER, Rev 6.2.29</FONT>
<BR><FONT SIZE=3D2> =
<Adaptec aic7880 Ultra SCSI adapter></FONT>
<BR><FONT SIZE=3D2> aic7880: =
Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs</FONT>
</P>
<P><FONT SIZE=3D2>blk: queue c14ce618, I/O limit 4095Mb (mask =
0xffffffff)</FONT>
<BR><FONT SIZE=3D2>DAC960: ***** DAC960 RAID Driver Version 2.4.20aa1 =
of 4 December 2002 *****</FONT>
<BR><FONT SIZE=3D2>DAC960: Copyright 1998-2001 by Leonard N. Zubkoff =
<[EMAIL PROTECTED]></FONT>
<BR><FONT SIZE=3D2>DAC960#0: Configuring Mylex DAC960PL PCI RAID =
Controller</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Firmware Version: 3.52-0-02, =
Channels: 2, Memory Size: 16MB</FONT>
<BR><FONT SIZE=3D2>DAC960#0: PCI Bus: 0, Device: 11, =
Function: 0, I/O Address: 0xFC80</FONT>
<BR><FONT SIZE=3D2>DAC960#0: PCI Address: 0xFFBEFC00 mapped =
at 0xD0C10C00, IRQ Channel: 16</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Controller Queue Depth: 64, =
Maximum Blocks per Command: 128</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Driver Queue Depth: 63, =
Scatter/Gather Limit: 17 of 17 Segments</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Stripe Size: 64KB, Segment =
Size: 8KB, BIOS Geometry: 255/63</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Physical Devices:</FONT>
<BR><FONT SIZE=3D2>DAC960#0: 0:0 Vendor: =
SEAGATE Model: =
ST34573W =
Revision: 6244</FONT>
<BR><FONT =
SIZE=3D2>DAC960#0: =
Serial Number: LN80937300007914HKCS</FONT>
<BR><FONT =
SIZE=3D2>DAC960#0: =
Disk Status: Online, 8888320 blocks</FONT>
<BR><FONT SIZE=3D2>DAC960#0: 1:1 Vendor: =
SEAGATE Model: =
ST34573W =
Revision: 6244</FONT>
<BR><FONT =
SIZE=3D2>DAC960#0: =
Serial Number: LN80919600007922H612</FONT>
<BR><FONT SIZE=3D2>DAC960#0: &n=
bsp; Disk Status: Online, 8888320 blocks</FONT>
<BR><FONT SIZE=3D2>DAC960#0: Logical Drives:</FONT>
<BR><FONT SIZE=3D2>DAC960#0: /dev/rd/c0d0: =
RAID-0, Online, 17776640 blocks, Write Thru</FONT>
<BR><FONT SIZE=3D2>Partition check:</FONT>
<BR><FONT SIZE=3D2> rd/c0d0: rd/c0d0p1 rd/c0d0p2 rd/c0d0p3</FONT>
<BR><FONT SIZE=3D2>reiserfs: found format "3.6" with standard =
journal</FONT>
<BR><FONT SIZE=3D2>reiserfs: enabling write barrier flush mode</FONT>
<BR><FONT SIZE=3D2>reiserfs: using ordered data mode</FONT>
<BR><FONT SIZE=3D2>reiserfs: checking transaction log (dac960(48,3)) =
for (dac960(48,3))</FONT>
<BR><FONT SIZE=3D2>Warning, log replay starting on readonly =
filesystem</FONT>
<BR><FONT SIZE=3D2>reiserfs: replayed 2 transactions in 3 =
seconds</FONT>
<BR><FONT SIZE=3D2>Using r5 hash to sort names</FONT>
<BR><FONT SIZE=3D2>VFS: Mounted root (reiserfs filesystem) =
readonly.</FONT>
<BR><FONT SIZE=3D2>Trying to move old root to /initrd ... failed</FONT>
<BR><FONT SIZE=3D2>Unmounting old root</FONT>
<BR><FONT SIZE=3D2>Trying to free ramdisk memory ... okay</FONT>
<BR><FONT SIZE=3D2>Freeing unused kernel memory: 184k freed</FONT>
<BR><FONT SIZE=3D2>md: Autodetecting RAID arrays.</FONT>
<BR><FONT SIZE=3D2>md: autorun ...</FONT>
<BR><FONT SIZE=3D2>md: ... autorun DONE.</FONT>
<BR><FONT SIZE=3D2>Adding Swap: 658656k swap-space (priority 42)</FONT>
<BR><FONT SIZE=3D2>Intel(R) PRO/100 Network Driver - version =
2.1.29-k3</FONT>
<BR><FONT SIZE=3D2>Copyright (c) 2002 Intel Corporation</FONT>
</P>
<P><FONT SIZE=3D2>e100: selftest OK.</FONT>
<BR><FONT SIZE=3D2>e100: eth0: Intel(R) 8255x-based Ethernet =
Adapter</FONT>
</P>
<P><FONT SIZE=3D2>e100: selftest OK.</FONT>
<BR><FONT SIZE=3D2>e100: eth1: Intel(R) 8255x-based Ethernet =
Adapter</FONT>
</P>
<P><FONT SIZE=3D2>e100: eth0 NIC Link is Up 100 Mbps Half duplex</FONT>
<BR><FONT SIZE=3D2>raw1394: /dev/raw1394 device initialized</FONT>
<BR><FONT SIZE=3D2>IPv6 v0.8 for NET4.0</FONT>
<BR><FONT SIZE=3D2>IPv6 over IPv4 tunneling driver</FONT>
<BR><FONT SIZE=3D2>isapnp: Scanning for PnP cards...</FONT>
<BR><FONT SIZE=3D2>isapnp: Card 'CS4236B Audio'</FONT>
<BR><FONT SIZE=3D2>isapnp: 1 Plug & Play card detected total</FONT>
<BR><FONT SIZE=3D2>eth0: no IPv6 routers present</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C3AE0E.1275A1A0--
---------------------------------------
Received: (at 221505-done) by bugs.debian.org; 29 Aug 2004 20:22:17 +0000
>From [EMAIL PROTECTED] Sun Aug 29 13:22:17 2004
Return-path: <[EMAIL PROTECTED]>
Received: from baikonur.stro.at [213.239.196.228]
by spohr.debian.org with esmtp (Exim 3.35 1 (Debian))
id 1C1WBt-0003MM-00; Sun, 29 Aug 2004 13:22:17 -0700
Received: from localhost (localhost [127.0.0.1])
by baikonur.stro.at (Postfix) with ESMTP id 714B85C00A
for <[EMAIL PROTECTED]>; Sun, 29 Aug 2004 22:22:15 +0200 (CEST)
Received: from baikonur.stro.at ([127.0.0.1])
by localhost (baikonur [127.0.0.1]) (amavisd-new, port 10024)
with ESMTP id 08327-10 for <[EMAIL PROTECTED]>;
Sun, 29 Aug 2004 22:22:15 +0200 (CEST)
Received: from sputnik (M856P025.adsl.highway.telekom.at [62.47.138.249])
by baikonur.stro.at (Postfix) with ESMTP id 02C0C5C008
for <[EMAIL PROTECTED]>; Sun, 29 Aug 2004 22:22:15 +0200 (CEST)
Received: from max by sputnik with local (Exim 4.34)
id 1C1WBu-0008Ra-2N
for [EMAIL PROTECTED]; Sun, 29 Aug 2004 22:22:18 +0200
Date: Sun, 29 Aug 2004 22:22:18 +0200
From: maks attems <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: RE: Cannot configure network on sarge install
Message-ID: <[EMAIL PROTECTED]>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.5.6+20040722i
Sender: maximilian attems <[EMAIL PROTECTED]>
X-Virus-Scanned: by Amavis (ClamAV) at stro.at
Delivered-To: [EMAIL PROTECTED]
X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2004_03_25
(1.212-2003-09-23-exp) on spohr.debian.org
X-Spam-Status: No, hits=-3.0 required=4.0 tests=BAYES_00 autolearn=no
version=2.60-bugs.debian.org_2004_03_25
X-Spam-Level:
hello,
sarge is about to be released,
your bug report refers to an _very_ old d-i version,
please try out newer debian installer:
http://www.debian.org/devel/debian-installer/
if you are still having above named problems (very unlikely),
as netcfg has been much improved since,
please reopen bug.
anyways thanks for your bug report.
--
maks
kernel janitor http://janitor.kernelnewbies.org/
