we are running Debian Sarge on a DELL PowerEdge 2650 with linux kernel
2.6.8-1-686-smp. For any purpose kacpid takes over all cpu time of one cpu.
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 15 61.0 0.0 0 0 ? S< 17:47 42:20 [kacpid]
There's nothing else running on that machina that might produce load.
What is going wrong? What do i have to configure to get rid of this? Is it a bug?
best regards, Tobias
-- Tobias Herziger CHIP Xonio Online GmbH, Poccistrasse 11, 80336 München |
Some verbose information:
[EMAIL PROTECTED]:~# ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1528 528 ? S 17:47 0:00 init [2]
root 2 0.0 0.0 0 0 ? S 17:47 0:00 [migration/0]
root 3 0.0 0.0 0 0 ? SN 17:47 0:00 [ksoftirqd/0]
root 4 0.0 0.0 0 0 ? S 17:47 0:00 [migration/1]
root 5 0.0 0.0 0 0 ? SN 17:47 0:00 [ksoftirqd/1]
root 6 0.0 0.0 0 0 ? S 17:47 0:00 [migration/2]
root 7 0.0 0.0 0 0 ? SN 17:47 0:00 [ksoftirqd/2]
root 8 0.0 0.0 0 0 ? S 17:47 0:00 [migration/3]
root 9 0.0 0.0 0 0 ? SN 17:47 0:00 [ksoftirqd/3]
root 10 0.0 0.0 0 0 ? S< 17:47 0:00 [events/0]
root 11 0.0 0.0 0 0 ? S< 17:47 0:00 [events/1]
root 12 0.0 0.0 0 0 ? S< 17:47 0:00 [events/2]
root 13 0.0 0.0 0 0 ? S< 17:47 0:00 [events/3]
root 14 0.0 0.0 0 0 ? S< 17:47 0:00 [khelper]
root 15 61.0 0.0 0 0 ? S< 17:47 46:59 [kacpid]
root 57 0.0 0.0 0 0 ? S< 17:47 0:00 [kblockd/0]
root 58 0.0 0.0 0 0 ? S< 17:47 0:00 [kblockd/1]
root 59 0.0 0.0 0 0 ? S< 17:47 0:00 [kblockd/2]
root 60 0.0 0.0 0 0 ? S< 17:47 0:00 [kblockd/3]
root 70 0.0 0.0 0 0 ? S 17:47 0:00 [pdflush]
root 71 0.0 0.0 0 0 ? S 17:47 0:00 [pdflush]
root 72 0.0 0.0 0 0 ? S 17:47 0:00 [kswapd0]
root 73 0.0 0.0 0 0 ? S< 17:47 0:00 [aio/0]
root 74 0.0 0.0 0 0 ? S< 17:47 0:00 [aio/1]
root 75 0.0 0.0 0 0 ? S< 17:47 0:00 [aio/2]
root 76 0.0 0.0 0 0 ? S< 17:47 0:00 [aio/3]
root 212 0.0 0.0 0 0 ? S 17:47 0:00 [kseriod]
root 228 0.0 0.0 0 0 ? S 17:47 0:00 [scsi_eh_0]
root 229 0.0 0.0 0 0 ? S 17:47 0:00 [aacraid]
root 276 0.0 0.0 0 0 ? S 17:47 0:00 [kjournald]
root 1393 0.0 0.0 0 0 ? S 17:48 0:00 [khubd]
root 1660 0.0 0.0 0 0 ? S 17:48 0:00 [pciehpd_event]
root 1680 0.0 0.0 0 0 ? S 17:48 0:00 [shpchpd_event]
root 1771 0.0 0.0 2400 876 ? Ss 17:48 0:00 dhclient -e -pf /var/run/dhclient.eth0.pid -lf /var/run/dhclient.eth0.lea
root 2117 0.0 0.0 2284 816 ? Ss 17:48 0:00 /sbin/syslogd
root 2120 0.0 0.0 2412 1476 ? Ss 17:48 0:00 /sbin/klogd
root 2173 0.0 0.0 1528 468 ? Ss 17:48 0:00 /usr/sbin/irqbalance
root 2256 0.0 0.0 3432 1448 ? Ss 17:48 0:00 /usr/sbin/sshd
daemon 2278 0.0 0.0 1724 636 ? Ss 17:48 0:00 /usr/sbin/atd
root 2281 0.0 0.0 1800 820 ? Ss 17:48 0:00 /usr/sbin/cron
root 2289 0.0 0.0 1532 488 tty3 Ss+ 17:48 0:00 /sbin/getty 38400 tty3
root 2290 0.0 0.0 1532 488 tty4 Ss+ 17:48 0:00 /sbin/getty 38400 tty4
root 2291 0.0 0.0 1532 488 tty5 Ss+ 17:48 0:00 /sbin/getty 38400 tty5
root 2292 0.0 0.0 1532 488 tty6 Ss+ 17:48 0:00 /sbin/getty 38400 tty6
root 2470 0.0 0.0 1528 484 tty1 Ss+ 17:53 0:00 /sbin/getty 38400 tty1
root 2511 0.0 0.0 1528 484 tty2 Ss+ 17:53 0:00 /sbin/getty 38400 tty2
root 2550 0.0 0.0 6340 2216 ? Ss 17:54 0:00 sshd: [EMAIL PROTECTED]/0
root 2552 0.0 0.0 3724 2248 pts/0 Ss+ 17:54 0:00 -bash
root 2568 0.0 0.0 6188 2148 ? Rs 17:59 0:00 sshd: [EMAIL PROTECTED]/1
root 2570 0.0 0.0 3720 2268 pts/1 Ss 17:59 0:00 -bash
root 2663 0.0 0.0 2536 856 pts/1 R+ 19:04 0:00 ps aux
[EMAIL PROTECTED]:~# lsmod
Module Size Used by
ipv6 281636 18
thermal 12912 0
fan 4204 0
button 6520 0
processor 17824 1 thermal
ac 5036 0
battery 9612 0
af_packet 23976 2
shpchp 102956 0
pciehp 99820 0
pci_hotplug 35708 2 shpchp,pciehp
ohci_hcd 22596 0
usbcore 122148 3 ohci_hcd
serverworks 13492 0
sworks_agp 9600 0
agpgart 35436 1 sworks_agp
pcspkr 3884 0
tsdev 7616 0
mousedev 10736 0
psmouse 20616 0
floppy 62608 0
evdev 9824 0
capability 4744 0
commoncap 7552 1 capability
ide_cd 43232 0
ide_core 142556 2 serverworks,ide_cd
cdrom 41148 1 ide_cd
rtc 14184 0
sd_mod 22144 4
unix 31092 4
font 8544 0
vesafb 6880 0
cfbcopyarea 4064 1 vesafb
cfbimgblt 3264 1 vesafb
cfbfillrect 4000 1 vesafb
e1000 86884 0
ext3 129640 1
jbd 70520 1 ext3
ext2 74504 1
mbcache 10340 2 ext3,ext2
aacraid 46800 3
scsi_mod 127972 2 sd_mod,aacraid
[EMAIL PROTECTED]:~# cat /var/log/dmesg
Linux version 2.6.8-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 SMP Thu Oct 7 01:53:29 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000effe0000 (usable)
BIOS-e820: 00000000effe0000 - 00000000effefc00 (ACPI data)
BIOS-e820: 00000000effefc00 - 00000000effff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000180000000 (usable)
Warning only 4GB will be used.
Use a PAE enabled kernel.
3200MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
On node 0 totalpages: 1048576
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 819200 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdc40
ACPI: RSDT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdc54
ACPI: FADT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdc84
ACPI: MADT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdcf8
ACPI: SPCR (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x000fdd80
ACPI: DSDT (v001 DELL PE2650 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 8
IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
IOAPIC[1]: Assigned apic_id 9
IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
IOAPIC[2]: Assigned apic_id 10
IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro noacpi
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2392.434 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3889236k/4194304k available (1653k kernel code, 41668k reserved, 762k data, 168k init, 3014528k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4734.97 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
per-CPU timeslice cutoff: 1462.89 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4767.74 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Booting processor 2/6 eip 3000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4767.74 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Booting processor 3/7 eip 3000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 4767.74 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
Total of 4 processors activated (19038.20 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 9-0, 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10,
10-11, 10-12, 10-13, 10-14, 10-15 not connected.
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2391.0817 MHz.
..... host bus clock speed is 99.0659 MHz.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
CPU0: online
domain 0: span 03
groups: 01 02
domain 1: span 0f
groups: 03 0c
CPU1: online
domain 0: span 03
groups: 02 01
domain 1: span 0f
groups: 03 0c
CPU2: online
domain 0: span 0c
groups: 04 08
domain 1: span 0f
groups: 0c 03
CPU3: online
domain 0: span 0c
groups: 08 04
domain 1: span 0f
groups: 0c 03
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4712k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc91e, last bus=5
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Root Bridge [PCI4] (00:04)
PCI: Probing PCI hardware (bus 04)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.ZION._PRT]
ACPI: PCI Root Bridge [PCI3] (00:03)
PCI: Probing PCI hardware (bus 03)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
ACPI: PCI Root Bridge [PCI2] (00:02)
PCI: Probing PCI hardware (bus 02)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 *11 12 14)
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 *10 11 12 14)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11 12 14)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 *5 6 7 10 11 12 14)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
PnPBIOS: Unknown tag '0x2', length '0'.
PnPBIOS: Unknown tag '0x0', length '1'.
PnPBIOS: Unknown tag '0x0', length '0'.
PnPBIOS: Unknown tag '0xc', length '2'.
PnPBIOS: Unknown tag '0x0', length '2'.
PnPBIOS: Unknown tag '0xc', length '5'.
pnp: 00:00: ioport range 0x800-0x890 has been reserved
pnp: 00:00: ioport range 0x8a0-0x8af has been reserved
pnp: 00:00: ioport range 0xb001-0xb001 has been reserved
pnp: 00:00: ioport range 0xca8-0xcaa has been reserved
pnp: 00:12: ioport range 0xc00-0xc01 has been reserved
pnp: 00:12: ioport range 0xc06-0xc08 has been reserved
pnp: 00:12: ioport range 0xc14-0xc14 has been reserved
pnp: 00:12: ioport range 0xc50-0xc51 has been reserved
pnp: 00:12: ioport range 0xc6f-0xc6f has been reserved
pnp: 00:12: ioport range 0xcd6-0xcd7 has been reserved
pnp: 00:12: ioport range 0xf50-0xf58 has been reserved
PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:04.1[B] -> GSI 23 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:04.2[C] -> GSI 27 (level, low) -> IRQ 193
ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:04:08.1[A] -> GSI 30 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 24 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:02:06.1[B] -> GSI 25 (level, low) -> IRQ 217
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 16.
number of IO-APIC #9 registers: 16.
number of IO-APIC #10 registers: 16.
testing the IO APIC.......................
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 00F 0F 0 0 0 0 0 1 1 31
01 00F 0F 0 0 0 0 0 1 1 39
02 00F 0F 1 0 0 0 0 1 1 41
03 00F 0F 0 0 0 0 0 1 1 49
04 00F 0F 0 0 0 0 0 1 1 51
05 00F 0F 0 0 0 0 0 1 1 59
06 00F 0F 0 0 0 0 0 1 1 61
07 00F 0F 0 0 0 0 0 1 1 69
08 00F 0F 0 0 0 0 0 1 1 71
09 00F 0F 0 1 0 1 0 1 1 79
0a 00F 0F 0 0 0 0 0 1 1 81
0b 00F 0F 1 1 0 1 0 1 1 89
0c 00F 0F 0 0 0 0 0 1 1 91
0d 00F 0F 0 0 0 0 0 1 1 99
0e 00F 0F 0 0 0 0 0 1 1 A1
0f 00F 0F 0 0 0 0 0 1 1 A9
IO APIC #9......
.... register #00: 09000000
....... : physical APIC id: 09
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 09000000
....... : arbitration: 09
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 00F 0F 1 1 0 1 0 1 1 B1
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 00F 0F 1 1 0 1 0 1 1 B9
08 00F 0F 1 1 0 1 0 1 1 D1
09 00F 0F 1 1 0 1 0 1 1 D9
0a 000 00 1 0 0 0 0 0 0 00
0b 00F 0F 1 1 0 1 0 1 1 C1
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 00F 0F 1 1 0 1 0 1 1 C9
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #10......
.... register #00: 0A000000
....... : physical APIC id: 0A
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0A000000
....... : arbitration: 0A
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ2 -> 0:2
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ177 -> 1:3
IRQ185 -> 1:7
IRQ209 -> 1:8
IRQ217 -> 1:9
IRQ193 -> 1:11
IRQ201 -> 1:14
.................................... done.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4712 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
SCSI subsystem initialized
Red Hat/Adaptec aacraid driver (1.1.2-lk2 Oct 7 2004)
ACPI: PCI interrupt 0000:04:08.1[A] -> GSI 30 (level, low) -> IRQ 201
AAC0: kernel 2.8.4 build 6089
AAC0: monitor 2.8.4 build 6089
AAC0: bios 2.8.0 build 6089
AAC0: serial 284010d3fafaf001
scsi0 : percraid
Using anticipatory io scheduler
Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 24 (level, low) -> IRQ 209
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:02:06.1[B] -> GSI 25 (level, low) -> IRQ 217
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI device sda: 142182912 512-byte hdwr sectors (72798 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: sda3: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 786529
ext3_orphan_cleanup: deleting unreferenced inode 786484
ext3_orphan_cleanup: deleting unreferenced inode 786483
EXT3-fs: sda3: 3 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1
EXT3 FS on sda3, internal journal
Real Time Clock Driver v1.12
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Capability LSM initialized
inserting floppy driver for 2.6.8-1-686-smp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:0f.2: ServerWorks OSB4/CSB5 OHCI USB Controller
ohci_hcd 0000:00:0f.2: irq 11, pci mem f8a3d000
ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: Address64 -------- Resource unparsed
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: Address64 -------- Resource unparsed
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
NET: Registered protocol family 17
