Package: kernel-image-2.6.8-1-686-smp
Version: 2.6.8-3
Severity: important
After upgrading from 2.6.7-1-686-smp the box did not boot.
Boot-Messages are attached from both kernels. Looks like the
scsi-driver is not included or does not get loaded at the
right time. The box uses Raid1 on sda1 and sdb1 as root-filesystem
and we are using udev with devfs-layout. Might be a bug in
initrd-tools for that (unusual?) configuration.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.7-1-686-smp
Locale: LANG=C, LC_CTYPE=de_DE
Versions of packages kernel-image-2.6.8-1-686-smp depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii fileutils 5.2.1-2 The GNU file management utilities
ii initrd-tools 0.1.74 tools to create initrd image for p
ii module-init-tools 3.1-pre5-7 tools for managing Linux kernel mo
-- no debconf information
boot:
Loading Linux...................................................................
..................................................
BIOS data check successful Linux version
2.6.8-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #1
SMP Mon Sep 13 23:02:39 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007ffffc00 (ACPI data)
BIOS-e820: 000000007ffffc00 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6900
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x000f6910
ACPI: RSDT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7fffa25c
ACPI: FADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffafa
ACPI: MADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffb6e
ACPI: BOOT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffbd8
ACPI: DSDT (v001 INTEL 024B 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x404
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 4
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: Assigned apic_id 5
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 31 low level)
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=900 console=ttyS1,57600
devfs=mount
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1000.117 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2070708k/2097088k available (1654k kernel code, 25248k reserved, 762k
data, 168k init, 1179584k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1966.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.00 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1994.75 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3960.83 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.0531 MHz.
..... host bus clock speed is 133.0270 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4764k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb57, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [IR1] (IRQs 5 10) *0
ACPI: PCI Interrupt Link [LN0E] (IRQs *14)
ACPI: PCI Interrupt Link [LN10] (IRQs *16)
ACPI: PCI Interrupt Link [LN11] (IRQs *17)
ACPI: PCI Interrupt Link [LN12] (IRQs *18)
ACPI: PCI Interrupt Link [LN13] (IRQs *19)
ACPI: PCI Interrupt Link [LN14] (IRQs *20)
ACPI: PCI Interrupt Link [LN15] (IRQs *21)
ACPI: PCI Interrupt Link [LN16] (IRQs *22)
ACPI: PCI Interrupt Link [LN17] (IRQs *23)
ACPI: PCI Interrupt Link [LN18] (IRQs *24)
ACPI: PCI Interrupt Link [LN19] (IRQs *25)
ACPI: PCI Interrupt Link [LN1A] (IRQs *26)
ACPI: PCI Interrupt Link [LN1B] (IRQs *27)
ACPI: PCI Interrupt Link [LN1C] (IRQs *28)
ACPI: PCI Interrupt Link [LN1D] (IRQs *29)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Embedded Controller [EC0] (gpe 4)
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f69c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa934, dseg 0x400
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0xcd6-0xcd7 has been reserved
pnp: 00:00: ioport range 0xfe00-0xfe3f has been reserved
pnp: 00:00: ioport range 0x580-0x58f has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 19 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 18 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:04.1[B] -> GSI 17 (level, low) -> IRQ 209
testing the IO APIC.......................
Using vector-based indexing
.................................... done.
Simple Boot Flag at 0x7d set to 0x1
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4764 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
initrd-tools: 0.1.74
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid1 personality registered as nr 3
SCSI subsystem initialized
md: md0 stopped.
mdadm: cannot open device /dev/scsi/host0/bus0/target0/lun0/part1: No such file
or directory
mdadm: /dev/scsi/host0/bus0/target0/lun0/part1 has wrong uuid.
mdadm: cannot open device /dev/scsi/host0/bus0/target1/lun0/part1: No such file
or directory
mdadm: /dev/scsi/host0/bus0/target1/lun0/part1 has wEXT3-fs: unable to read
superblock
rong uuid.
mdadcramfs: wrong magic
m: no devices found for /devfs/md/0
EXT3-fs: unable to read superblock
cramfs: wrong magic
mount: mount poiKernel panic: Attempted to kill init!
nt dev does not exist
pivot_roo
Linux version 2.6.7-1-686-smp ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian
1:3.3.4-2)) #1 SMP Thu Jul 8 06:08:37 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4400 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
BIOS-e820: 000000007fff0000 - 000000007ffffc00 (ACPI data).....................
BIOS-e820: 000000007ffffc00 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6900
On node 0 totalpages: 524272
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 294896 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x000f6910
ACPI: RSDT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7fffa25c
ACPI: FADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffafa
ACPI: MADT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffb6e
ACPI: BOOT (v001 INTEL 024B 0x00000001 PTL 0x00000000) @ 0x7ffffbd8
ACPI: DSDT (v001 INTEL 024B 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x404
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Processor #3 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 4
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] global_irq_base[0x10])
IOAPIC[1]: Assigned apic_id 5
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 31 low level)
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=LinuxOLD ro root=900 console=ttyS1,57600
devfs=mount
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 1000.051 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 2071668k/2097088k available (1628k kernel code, 24288k reserved, 688k
data, 168k init, 1179584k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1966.08 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.00 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1994.75 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3960.83 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.0533 MHz.
..... host bus clock speed is 133.0271 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4680k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb57, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [IR1] (IRQs 5 10) *0
ACPI: PCI Interrupt Link [LN0E] (IRQs *14)
ACPI: PCI Interrupt Link [LN10] (IRQs *16)
ACPI: PCI Interrupt Link [LN11] (IRQs *17)
ACPI: PCI Interrupt Link [LN12] (IRQs *18)
ACPI: PCI Interrupt Link [LN13] (IRQs *19)
ACPI: PCI Interrupt Link [LN14] (IRQs *20)
ACPI: PCI Interrupt Link [LN15] (IRQs *21)
ACPI: PCI Interrupt Link [LN16] (IRQs *22)
ACPI: PCI Interrupt Link [LN17] (IRQs *23)
ACPI: PCI Interrupt Link [LN18] (IRQs *24)
ACPI: PCI Interrupt Link [LN19] (IRQs *25)
ACPI: PCI Interrupt Link [LN1A] (IRQs *26)
ACPI: PCI Interrupt Link [LN1B] (IRQs *27)
ACPI: PCI Interrupt Link [LN1C] (IRQs *28)
ACPI: PCI Interrupt Link [LN1D] (IRQs *29)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Embedded Controller [EC0] (gpe 4)
ACPI: PCI Root Bridge [PCI1] (00:01)
PCI: Probing PCI hardware (bus 01)
ACPI: Power Resource [FN10] (off)
ACPI: Power Resource [FN11] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f69c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa934, dseg 0x400
pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:00: ioport range 0xcd6-0xcd7 has been reserved
pnp: 00:00: ioport range 0xfe00-0xfe3f has been reserved
pnp: 00:00: ioport range 0x580-0x58f has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
ACPI: PCI Interrupt Link [IR1] enabled at IRQ 10
testing the IO APIC.......................
.................................... done.
PCI: Using ACPI for IRQ routing
Simple Boot Flag at 0x7d set to 0x1
Starting balanced_irq
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4680 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Mounted devfs on /dev
Freeing unused kernel memory: 168k freed
initrd-tools: 0.1.71
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid1 personality registered as nr 3
SCSI subsystem initialized
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Using anticipatory io scheduler
(scsi0:A:0): 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
(scsi0:A:1): 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0764
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:0:0: Tagged Queuing enabled. Depth 8
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:1:0: Tagged Queuing enabled. Depth 8
Vendor: ESG-SHV Model: SCA HSBP M10 Rev: 0.06
Type: Processor ANSI SCSI revision: 02
scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7899 Ultra160 SCSI adapter>
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 8386733 512-byte hdwr sectors (4294 MB)
SCSI device sdb: drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1 p2
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
mdadm: /devfs/md/0 has been started with 2 drives.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.86 booting
