Selon Horms <[EMAIL PROTECTED]>: > On Wed, Jan 05, 2005 at 09:50:17PM +0100, Peter Egli wrote: > > I also had problems on my debian (testing) since I did > > upgrade my kernel from 2.4.26 to 2.4.27 (was yesterday). > > > > Not with a palm, but with an other package that accesses > > temperature sensors over the serial interface > > (ttySx --> package digitemp) > > > > In the bug report of digitemp > > (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=287982) > > i found the following link: > > > > https://lists.brianlane.com/pipermail/dt-general/2004-December/000096.html > > > > where you can follow the reason for the problems on > > serial interfaces with kernel-image-2.4.27 for the > > digitemp package. > > > > The workaround that solved my problem with digitemp: > > --> downgrade kernel from 2.4.27 --> 2.4.26 > > > > maybe, this solves also your problem with the palm ! > > > > hope this helps.... > > Actually, I don't think these problems are related. > > Mr gpe92, does the synchronisation with the palm require any > special kernel devices, or does it just use a regular serial device. > > Some other people have reported problems with slow modem speeds > on 2.4.27, perhaps these problems are related. > > -- > Horms >
No special module is required. It uses only /dev/ttySx. The problem is related to the kernel 2.4.27. It doesn't exist on 2.4.26, 2.6.8 and 2.6.9 Debian kernel. I have a problem with xtel too. It uses a ttySx too. With the 2.4.27 It's necessary to launch xtel twice before it goes well.
