Marco Valli scriveva:
> Una domanda per coloro che usano Sarge col kernel 2.6.8: riuscite a
> masterizzare cdaudio con k3b?
> saluti
>
Incuriosito da quanto gia` scritto da Franco Vite a proposito di
questo strano problema, ho fatto una prova (una simulazione) e la
risposta e` si`, col kernel 2.6.8-2-k7 sul mio mobile AMD Athlon(tm)
XP 1500+.
Ecco una sintesi del log relativo alla simulazione che ho appena
effettuato con successo:
---------------------------------------------------------------------
Devices
-----------------------
MATSHITA UJDA730 DVD/CDRW 1.00 (/dev/hdc, ) at /media/cdrom [CD-R;
CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; DVD-RAM; CD-ROM; CD-R; CD-RW] [SAO;
TAO; RAW; RAW/R96R]
System
-----------------------
K3b Version: 0.11.20
KDE Version: 3.3.2
QT Version: 3.3.4
Kernel: 2.6.8-2-k7
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.8-2-k7
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and
newer. /usr/bin/cdrecord: If you have unexpected problems, please try
Linux-2.4 or Solaris. /usr/bin/cdrecord: Warning: Linux-2.6.8
introduced incompatible interface changes. /usr/bin/cdrecord: Warning:
SCSI transport does no longer work for suid root programs.
/usr/bin/cdrecord: Warning: if cdrecord fails, try to run it from a
root account. scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling NOTE: this version of cdrecord is an inofficial
(modified) release of cdrecord and thus may have bugs that are
not present in the original version. Please send bug reports and
support requests to <[EMAIL PROTECTED]>. The original
author should not be bothered with problems of this version. TOC Type:
1 = CD-ROM Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identifikation : 'UJDA730 DVD/CDRW'
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0012
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1638400 = 1600 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 201 MB
Total size: 231 MB (22:53.48) = 103011 sectors
Lout start: 231 MB (22:55/36) = 103011 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11524 (97:28/26)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 13
Manufacturer: Multi Media Masters & Machinary SA
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 256838
Starting to write CD/DVD at speed 8 in dummy TAO mode for single
session. Last chance to quit, starting dummy write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer
ready. BURN-Free is OFF.
Turning BURN-Free on
Starting new track at sector: 0
Track 01: 0 of 201 MB written.
Track 01: 1 of 201 MB written (fifo 90%) [buf 84%] 3.4x.
Track 01: 2 of 201 MB written (fifo 100%) [buf 99%] 4.0x.
[CUT]
Track 01: 201 of 201 MB written (fifo 100%) [buf 99%] 8.4x.
Track 01: Total bytes read/written: 210962432/210962432 (103009
sectors). Writing time: 174.590s
Average write speed 7.9x.
Min drive buffer fill was 99%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.006s
/usr/bin/cdrecord: fifo had 3323 puts and 3323 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 3224 times full, min
fill was 87%. BURN-Free was never needed.
cdrecord comand:
-----------------------
/usr/bin/cdrecord.mmap -v gracetime=2 dev=/dev/hdc speed=8 -tao -dummy
driveropts=burnfree -eject -data -tsize=103009s -
mkisofs
-----------------------
103009
INFO: ISO-8859-15 character encoding detected by locale settings.
Assuming ISO-8859-15 encoded filenames on source filesystem,
use -input-charset to override.
0.50% done, estimate finish Mon Oct 3 12:17:39 2005
0.99% done, estimate finish Mon Oct 3 12:12:46 2005
1.47% done, estimate finish Mon Oct 3 12:09:59 2005
[CUT]
99.51% done, estimate finish Mon Oct 3 12:07:14 2005
Total translation table size: 0
Total rockridge attributes bytes: 7622
Total directory bytes: 14336
Path table size(bytes): 72
Max brk space used 21000
103009 extents written (201 MB)
mkisofs comand:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset
-appid K3B THE CD KREATOR VERSION 0.11.20 (C) 2003 SEBASTIAN TRUEG AND
THE K3B TEAM -publisher -preparer K3b - versione 0.11.20 -sysid LINUX
-volset-size 1 -volset-seqno 1 -sort /tmp/kde-peterpunk/k3blA73Ma.tmp
-rational-rock -hide-list /tmp/kde-peterpunk/k3bAvNC5a.tmp
-full-iso9660-filenames -iso-level 2 -path-list
/tmp/kde-peterpunk/k3bkqfobb.tmp
/home/peterpunk/.kde/share/apps/k3b/temp/dummydir0/
---------------------------------------------------------------------
Saluti,
peterpunk
--
,= ,-_-. =.
((_/)o o(\_))
`-'(. .)`-'
\_/ printf("Mai un giorno senza una riga\n");
