Questo messaggio segue quello del 26-1-05
Ho provato ad installare il kernel 2.4.27 s al posto del 2.4.18 sul mio
portatile Asus M2N, ma di leggere la memoria USB non se ne parla proprio.
Questo e' il dmesg:
debian:~# dmesg|less
Linux version 2.4.27-2-686 ([EMAIL PROTECTED]) (gcc version
3.3.5 (Debian 1:3.3.5-6)) #1 Thu Jan 20 11:10:41 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f740000 (usable)
BIOS-e820: 000000000f740000 - 000000000f750000 (ACPI data)
BIOS-e820: 000000000f750000 - 000000000f800000 (ACPI NVS)
0MB HIGHMEM available.
247MB LOWMEM available.
On node 0 totalpages: 63296
zone(0): 4096 pages.
zone(1): 59200 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f4b60
ACPI: RSDT (v001 A M I OEMRSDT 0x03000408 MSFT 0x00000097) @ 0x0f740000
ACPI: FADT (v002 A M I OEMFACP 0x03000408 MSFT 0x00000097) @ 0x0f740200
ACPI: OEMB (v001 A M I OEMBIOS 0x03000408 MSFT 0x00000097) @ 0x0f750040
ACPI: DSDT (v001 0ABBD 0ABBD001 0x00000001 MSFT 0x02000001) @ 0x00000000
Kernel command line: BOOT_IMAGE=Linux2.4.27 ro root=307 hdc=ide-scsi
max_scsi_luns=1
Found and enabled local APIC!
Initializing CPU#0
Detected 1400.085 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 243728k/253184k available (1197k kernel code, 9068k reserved, 451k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: a7e9fbbf 00000000 00000000 00000000
CPU: Common caps: a7e9fbbf 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1400.0411 MHz.
..... host bus clock speed is 100.0028 MHz.
cpu: 0, clocks: 1000028, slice: 500014
CPU0<T0:1000016,T1:500000,D:2,S:500014,C:1000028>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router default [8086/24cc] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using
pci=biosirq.
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4020 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 4020k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
ide_setup: hdc=ide-scsi
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ide: late registration of driver.
ICH4: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N040ATCS04-0, ATA DISK drive
blk: queue d0024ce0, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHS=77520/16/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [4864/255/63] p1 p2 < p5 p6 p7 >
Journalled Block Device driver loaded
ext3: No journal on filesystem on ide0(3,7)
Adding Swap: 530104k swap-space (priority -1)
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:16:14 Jan 20 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd480, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd880, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
hermes.c: 4 Dec 2002 David Gibson <[EMAIL PROTECTED]>
orinoco.c 0.13d (David Gibson <[EMAIL PROTECTED]> and others)
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1708
Type: CD-ROM ANSI SCSI revision: 02
scsi1 : scsi_debug, Version: 0.61 (20020815), num_devs=1, dev_size_mb=8,
opts=0x0
Vendor: Linux Model: scsi_debug Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
/dev/scsi/host1/bus0/target0/lun0: unknown partition table
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 0, lun 1
Attached scsi CD-ROM sr2 at scsi0, channel 0, id 0, lun 2
Attached scsi CD-ROM sr3 at scsi0, channel 0, id 0, lun 3
Attached scsi CD-ROM sr4 at scsi0, channel 0, id 0, lun 4
Attached scsi CD-ROM sr5 at scsi0, channel 0, id 0, lun 5
Attached scsi CD-ROM sr6 at scsi0, channel 0, id 0, lun 6
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr3: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr4: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr5: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr6: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xc800, 00:0c:6e:e4:f2:52, IRQ 5
eth0: Identified 8139 chip type 'RTL-8101'
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
ds: no socket drivers loaded!
questo lsmod:
debian:~# lsmod
Module Size Used by Not tainted
soundcore 3940 0 (autoclean)
pcmcia_core 46372 0
apm 9964 2 (autoclean)
af_packet 13000 1 (autoclean)
nls_cp437 4348 4 (autoclean)
vfat 10540 2 (autoclean)
8139too 14792 1
mii 2464 0 [8139too]
crc32 2912 0 [8139too]
msdos 5708 0 (unused)
fat 31960 0 [vfat msdos]
cpuid 840 0 (unused)
usb-storage 65088 0 (unused)
sr_mod 13912 0 (unused)
sg 31932 0 (unused)
sd_mod 11756 0 (unused)
scsi_debug 20032 0 (unused)
ide-scsi 10032 0
scsi_mod 95108 5 [usb-storage sr_mod sg sd_mod scsi_debug
ide-scsi]
orinoco 34548 0 (unused)
hermes 6020 0 [orinoco]
ide-cd 31296 0
cdrom 29828 0 [sr_mod ide-cd]
keybdev 2084 0 (unused)
usbkbd 3096 0 (unused)
input 3648 0 [keybdev usbkbd]
usb-uhci 23344 0 (unused)
usbcore 62924 0 [usb-storage usbkbd usb-uhci]
rtc 6440 0 (autoclean)
ext2 49516 1 (autoclean)
ext3 81068 0 (autoclean)
jbd 42468 0 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
piix 9096 1 (autoclean)
ide-disk 16800 4 (autoclean)
unix 14960 87 (autoclean)
ide-core 108600 4 (autoclean) [usb-storage ide-scsi ide-cd
ide-detect piix ide-disk]
e questo il mount:
debian:~# mount -t vfat /dev/sda1 /usbst
mount: /dev/sda1 is not a valid block device
non so piu' che cosa fare.
Un saluto... speranzoso.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
