I don't know is it make any sense but I've compiled
bridge as integrated, not as module.
And I don't state any line in "interfaces" file about
bridged interfaces; Only br0 exists.
Also I'm using br0 as external interface.
------------------------
gw11:/etc#
gw11:/etc# cat network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo
iface lo inet loopback
#
# Ayrintili bilgi ve diger parametreler icin:
# /usr/share/doc/bridge-utils/README.Debian
#
auto br0
iface br0 inet static
address 212.156.128.21
network 212.156.128.0
netmask 255.255.255.0
broadcast 212.156.128.255
bridge_ports eth0 eth1
bridge_stp on
bridge_fd 5
gateway 212.156.128.18
# UNUSED
# auto eth2
# iface eth2 inet static
# auto eth3
# iface eth3 inet static
gw11:/etc# free
total used free shared buffers cached
Mem: 257064 211444 45620 0 5276 159648
-/+ buffers/cache: 46520 210544
Swap: 128516 1604 126912
gw11:/etc#
gw11:/etc# lsmod
Module Size Used by Not tainted
shaper 3004 0 (unused)
tulip 36928 0 (unused)
eepro100 16816 0 (unused)
3c59x 24712 2
gw11:/etc#
------------------------
