On Fri, 11 Jan 2002 18:13, Anders Gjære wrote: > The machine is running 2.2 kernel > > I don't think zebra is supported on 2.4.x kernels
What problem does it have with 2.4.x? > # Side note, the RealTek and StarTech NICs at a local store > # were being bought > # at $14, and resold for $50. The 3Com NICs were being bought > # at $55, and > # resold at $65. I've seen NE2000 clones do more than 25% of the bandwidth of 100baseT. I really doubt that this is the entire problem, or even a significant part of it. > # Secondly, try your motherboard -- if the PCI bus speed is > # only 66Mb/s, then > # you'll only be able to do about 60Mbps -- you'll *never* hit 100Mbps, > # because your motherboard just physically can't handle it. This is totally wrong. There are two speeds for PCI, 33MHz and 66MHz, which come in both 32bit and 64bit variants. 32bit * 33MHz can do 132MB/s in burst mode, doing 10MB/s is no great challenge. > # Note that the > # ISA bus speed is usually slower than PCI, so you'll get even > # slower throughput. You just don't want to use ISA at all if you want performance. -- http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark http://www.coker.com.au/postal/ Postal SMTP/POP benchmark http://www.coker.com.au/projects.html Projects I am working on http://www.coker.com.au/~russell/ My home page
