Hi there,
I am new with portslave, and I cannot resolv a problem :((
I have a Cyclades PC400 pri isdn card. I want to telnet from my windows machine to my linux+portslave box, and get the prompt of my pc400 like if I use "cu -l /dev/ttyCM31", that is, configure portslave like a console server, is it?.
This is my config:
all.loc_host 10.213.1.18
all.locallogins yes
all.syslog
all.facility 2
all.filterdir /etc/portslave/filters
all.debug 1
all.authtype none
all.radnullpass yes
all.authhost1 localhost
all.accthost1 localhost
all.radtimeout 3
all.secret testing123
all.protocol socket_server
all.rem_host 192.168.42.65+
all.netmask 255.255.255.255
all.mtu 1500
all.socket_port 7001+
all.issue \n\
Portslave Internet Services\n\
\n\
Welcome to terminal server %h port S%p \n\
\n
all.syswtmp yes
all.porttype async
all.speed 9600
all.initchat TIMEOUT 10 \
ABORT "NO CARRIER" \
ABORT VOICE \
"" \d\l\dATZ \
OK\r\n-ATZ-OK\r\n "\c" \
TIMEOUT 3600 \
RING "\c" \
STATUS Incoming %p:I.HANDSHAKE \
"" ATA \
TIMEOUT 75 \
CONNECT@ "\c" \
STATUS Connected %p:I.HANDSHAKE
all.flow none
all.dcd yes
all.autoppp proxyarp modem asyncmap 0 %i: \
noipx noccp login auth require-pap refuse-chap \
mtu %t mru %t \
ms-dns 192.168.1.1 ms-dns 192.168.1.2 \
plugin /usr/lib/libpsr.so
all.pppopt proxyarp modem asyncmap 0 %i:%j \
noipx noccp \
mtu %t mru %t \
netmask %m idle %I maxconnect %T \
ms-dns 192.168.1.1 ms-dns 192.168.1.2 \
plugin /usr/lib/libpsr.so
s1.tty ttyCM31
s1.authtype none
when I do a telnet, I get this message:
telnet localhost 7001
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
portslave: standard input is not a tty
Connection closed by foreign host.
Any ideas??
thx in advance.
Javier.
Javier Castillo Alcíbar - [EMAIL PROTECTED]
Alhambra Systems, S.A. - www.alhsys.com
c/Albasanz 14, 28037 Madrid
Tel.: +34 91 787 23 00
Fax.: +34 91 787 23 01
