REPLY Nick Jennings wrote:
~~~~~~~~~~~~~~~~~~~~~~~~~~
Hi!
This is the best resolution !
pit:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
iface lo inet loopback
# The first network card - this entry was created during the Debian
installation# (network, broadcast and gateway are optional)
iface eth1 inet static
address 10.0.0.2
netmask 255.0.0.0
network 10.0.0.0
broadcast 10.255.255.255
iface eth0 inet static
address 10.0.0.1
netmask 255.0.0.0
network 10.0.0.0
broadcast 10.255.255.255
and:
1.
~~~~~~~~
(Point to Point Protocolt).
pit:~# cd /usr/src/linux/
pit:/usr/src/linux# make menuconfig
Network device support --->
<M> PPP (point-to-point) support
2.
~~~~~~~~
apt-get install pppoe
3.
~~~~~~~
/etc/ppp/pap-secrets
[EMAIL PROTECTED] somebody.org password
4.
~~~~~~~
The end of /etc/init.d/network file, write this:
ifconfig eth0 up
5.
~~~~~~~
Edit /etc/ppp/peers/dsl-provider file.
user [EMAIL PROTECTED]
6.
~~~~~~~
Edit /etc/init.d/ppp file, search the 'start' section.
search
pppd call provider
update
pppd call dsl-provider
7.
~~~~~~~
If you like the DSL connect start up at boot time type this !
touch /etc/ppp/ppp_on_boot
8.
~~~~~~~
/etc/init.d/ppp start - dsl connect
/etc/init.d/ppp stop - dsl disconnect :)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
if U like some masquerading :) --> I have some good tips :)
byte PiT
--
~~~~~--== WH.HU ==--~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ICQ :18353877
E-mail: mailto:[EMAIL PROTECTED]
URL: http://www.wh.hu P|T
