Helber, Your setup seems correct. Just two things to do.
1 On the Intranet, set up all machines' TCP/IP to use 172.16.0.10 as a "gateway". For win9x machines, use the "Network_Neighbourhood->Properties->TCP->Gateway". For Unix machines, add a route, or edit /etc/defaultroute, or whatever. 2 On your Linux box, enable "IP Forwarding". You may need to recompile the kernel, and in 2.1.late / 2.2, you also need to do a echo 1 > /proc/net/some_place_which_I_don't_recall But you are on the right track. ----- Original Message ----- From: Helber <[EMAIL PROTECTED]> To: <debian-isp@lists.debian.org> Sent: Tuesday, May 09, 2000 8:05 AM Subject: Seting a Gateway > Hi all, > > I´m having a hard time trying to understand routing or buildind agate > between two networks > > I need that a machine with two lan interfaces eth0 and eth1, each one > connected to a different net worked like a gateway, Conecting the nets. > > At eth0 I have an ip from internet and at eth1 I have an ip from intranet > 172.16.0.10. > From the internet I can access the server at eth0, and from the internet I > can access the same server but now at eth1. > What must I do to have access to the internet from a host in the intranet? > > The router table is as followed: > > Destination Router Genmask > Flags MSS Windown irtt Iface > 200.255.205.138 * 255.255.255.255 UH > 0 0 0 eth0 > 172.16.0.10 * 255.255.255.255 UH > 0 0 0 eth1 > 200.255.205.128 200.255.205.138 255.255.255.192 UG 0 > 0 0 eth0 > 200.255.205.128 * 255.255.255.192 U > 0 0 0 eth0 > 172.16.0.0 172.16.0.10 255.255.255.192 UG > 0 0 0 eth1 > 172.16.0.0 * 255.255.255.192 U > 0 0 0 eth1 > 127.0.0.0 * 255.0.0.0 > U 0 0 0 lo > default 0.0.0.0 > UG 0 0 0 eth0 > > > thanx for any advice. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
