- Intel XEON 3GHz - 2GB RAM - Intel SRCU42L RAID Controller SCSI - 3 Fujitsu u320 SCSI discs in a RAID-5 array
We've installed Debian Sarge.
The problem is, that we've been running hdparm on the RAID device with these result:
----
hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 138 MB in 3.04 seconds = 45.39 MB/sec
----
The result is not looking good.
At home I use a SATA HD, the hdparm result is about 60MB/sec.
I would be very thankful for any suggestion for solving these problems
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
