Dear all, we have done trials with the Peppercon ROL-F card, which offers a remote hardware reset. This is a Realtec based 10/100 Ethernet card at about EUR 70 that you use as a usual network card. You wire the Reset button cable to the card, and from the card to the Motherboard. After enabling the feature once, you can send a magic MAC layer packet to it (no need to configure an IP address, you simply use the MAC address) and it performs a hardware reset.
This, together with a serial cable routed towards a terminal server, should allow us to remotely manage our machines. Regards, Sebastian Wangnick -- Dipl.-Inform. Sebastian <dot> Wangnick <at eurocontrol dot int> Team Leader ENG/OPE/HMI Eurocontrol Maastricht UAC, Horsterweg 11, NL-6199AC Maastricht-Airport, +31-43-3661-370 ____ This message and any files transmitted with it are legally privileged and intended for the sole use of the individual(s) or entity to whom they are addressed. If you are not the intended recipient, please notify the sender by reply and delete the message and any attachments from your system. Any unauthorised use or disclosure of the content of this message is strictly prohibited and may be unlawful. Nothing in this e-mail message amounts to a contractual or legal commitment on the part of EUROCONTROL unless it is confirmed by appropriately signed hard copy. Any views expressed in this message are those of the sender. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
