Ainsi parla Prashanth Venkatesh le 057ème jour de l'an 2004:
> Hi,
>
> I installed debian woody on the server. On booting only one ethernet
> is active. The second one is not being detected. Both ethernets are
> onboard. eepro100 is the driver used. Following shows the details:
>
> Detected:
> --------------
> 02:08.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
> 10)
> Subsystem: Intel Corp.: Unknown device 1040
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR-
> Latency: 66 (2000ns min, 14000ns max), cache line size 10
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at f4122000 (32-bit, non-prefetchable)
> [size=4K] Region 1: I/O ports at 2400 [size=64]
> Region 2: Memory at f4100000 (32-bit, non-prefetchable)
> [size=128K] Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable-
> DSel=0 DScale=2 PME-
>
> Not Detected:
> -------------------
>
> 00:0b.0 Ethernet controller: Intel Corp.: Unknown device 100f (rev 01)
> Subsystem: Intel Corp.: Unknown device 1001
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF-
> FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR-
> Latency: 64 (63750ns min), cache line size 10
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at f4000000 (32-bit, non-prefetchable)
> [size=128K] Region 2: I/O ports at 1000 [size=64]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable-
> DSel=0 DScale=1 PME-
> Capabilities: [e4] #07 [0002]
> Capabilities: [f0] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
>
> Can anyone please provide me some hints on making the second ethernet
> active.
Any clue about the brand of the second card ? If not, please provide the
output of the following command:
#### cut here ####
lspci -n | grep "Class 0200"
#### cut here ####
--
Nicolas Rueff · Montbéliard · France · http://rueff.homelinux.org
(^> [EMAIL PROTECTED] · GPG 0xDD44DAB4
/v\ Jabber [EMAIL PROTECTED] · ICQ 97700474
<__/ « We are Penguin. Resistance is futile. You will be assimilated. »
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
