I tried Chris' approach below and that didn't seem to work either. But following Dale's suggestion of using * instead of localhost. Just for the future googlers, here's what I added to the top of my routers section to store and forward for exim 3:
store_and_forward: driver = domainlist transport = remote_smtp route_list = "* smtp.myisp.net" thanks for the help! Adam On Thu, 20 Nov 2003, Dale E Martin wrote: > > If you don't want to upgrade to version 4, then try adding the > > following as the very last router: > > > > smart_route: > > driver = domainlist > > transport = remote_smtp > > route_list = * smtp.myisp.net bydns_a > > If you make it the very last router, then you need to comment out the > direct_remote: one that is (probably) currently the last one. Basically > what the original poster had was OK except that their route_list specified > to use that route only for "localhost", not "*" iirc. > > Take care, > Dale > -- > Dale E. Martin, Clifton Labs, Inc. > Senior Computer Engineer > [EMAIL PROTECTED] > http://www.cliftonlabs.com > pgp key available > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
