Hello, Am 17:20 2003-03-05 +0100 hat Burner geschrieben:
>I've read some iptables and iproute2 howtos, but i realy do not know where to >begin, i dont even know if the hardware will be sufficient. P3/800 128Mb ram >and two good NIC's. Hmmm, do you like to root an OC3 with heavy traffic ??? I have a client with a 34 MBit and the Roter is an old K5 166 with 32 MByte of memory... The monthly middle is arround 1.3 MByte/Second >We don't need any advanced routing like bandwith balancing etc. I just need >to block most ports from public access and allow the servers (win) to update >from the internet. Can be done with a 486/100 and LRP <http://www.linuxrouter.org> which is based on Debian. >Maybe i should configure the linux router with all the external IP's on one >NIC, and give the protected servers local IP addresses. then NAT the public >IP/ports to the servers using iptables, this is a way to do it, but is it i >good way? I have done this before, blocked all ports and have done Portforwarding to the Servers. Never I have had problems... >I would be happy to recive any hints from someone who has done anything like >this before. > >//Burner Michelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
