Hello, first, i'm not on this list, so please cc me if you think you know what my problem is.
I have a dlink DI-804 switch/DSL-Router and want to use it without it's integrated DHCP funktionality. So i disabled DHCP. I can ping it, use it's web-interface to configure it or do this via it's telnet-interface - no problem so far. 192.168.1.0 is my net. 192.168.1.100 is the IP of my PC. 192.168.1.254 is the IP of the dlink. I have no problem using the DSL-Modem via PPPOE directly - everything works fine. But when i try to use the dlink between my PC and the modem - problems arise. The dlink immediately opens a DSL-connection - so this is ok. He has the IP and an external gateway. But i just can't reach any websites - no matter what kind of address. ping www.debian.de ping: unknown host www.debian.de ping 145.253.2.171 PING 145.253.2.171 (145.253.2.171) from 192.168.1.100 : 56(84) bytes of data. ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted --- 145.253.2.171 ping statistics --- 2 packets transmitted, 0 received, 100% loss, time 1020ms These are my routes: route Kernel IP Routentabelle Ziel Router Genmask Flags Metric Ref Use Iface 192.168.1.254 * 255.255.255.255 UH 0 0 0 eth0 192.168.2.0 * 255.255.255.0 U 0 0 0 vmnet8 localnet * 255.255.255.0 U 0 0 0 eth0 localnet * 255.255.255.0 U 0 0 0 irda0 default 192.168.1.254 0.0.0.0 UG 0 0 0 eth0 My resolv.conf: cat /etc/resolv.conf nameserver 145.253.2.171 nameserver 145.253.2.203 With resolv.conf, there is another interesting thing. I don't know what it means. The nameserver addresses that i got from my provider are different. When i insert them again, next time i use pppd they change to the ones i send you now. I don't know if the dlink can do this, too. But it seems not to be the problem, right? This is what my dlink says: WAN MAC Address : 00-05-5D-DB-9B-32 Current IP : 213.23.6.138 Current IP Mask : 255.255.255.0 Current Gateway : 145.253.1.223 Current DNS1 : 145.253.2.11 Current DNS2 : 145.253.2.75 LAN MAC Address : 00-05-5D-DB-9B-31 Current IP : 192.168.1.254 Current Subnet Mask : 255.255.255.0 DHCP : Disable Starting IP Address : 192.168.0.100 Number of IP Addresses : 100 Can you help me? What am I doing wrong? Thanks, Markus Lechner -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]