Hi On Thu, Dec 20, 2001 at 03:59:58PM +1100, Jeff Waugh wrote: > Hi all, > > Having some troubles with freeradius as packaged in woody. I'm > doing a very quick auth migration for a PM3, taking usernames > and crypted passwords from an old Qube, and putting them ni > various files for service authentication. > > FreeRADIUS is not cooperating. ;)
I suspect you'll get more answers if you ask on the FreeRADIUS mailing lists. See http://www.freeradius.org/ > Here's an example of what I have in the fast_users file: > > [EMAIL PROTECTED] Auth-Type := Crypt-Local, Password == "6IVIw" > garry Auth-Type := Crypt-Local, Password == "6IVIw" I haven't tried FreeRADIUS, so I may be talking nonsense, but that password does not look crypted. It should look something like this: X.SldLTDxGIGU or abB.3AxASd29. etc. i.e. 13 characters from the set (a-zA-Z0-9./). > Many of those. I'm getting this error upon running radtest with: radtest > garry blah localhost localhost pants > > Sending Access-Request of id 74 to 127.0.0.1:1812 > User-Name = "garry" > Password = "W)\204\310\316yvi\237\023(\013\027\316\336\225" > NAS-IP-Address = whale > NAS-Port-Id = "localhost" > rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=74, length=20 > > > The logs say: > > modcall: entering group authorize > modcall[authorize]: module "preprocess" returns ok > rlm_fastusers: checking defaults > rlm_fastusers: user not found > modcall[authorize]: module "fastusers" returns notfound This looks to me like it didn't find the user in the file. Are you sure you have the stuff in the right file? :) Are you sure you have the syntax correct? > modcall: group authorize returns ok > auth: No Auth-Type configuration for the request, rejecting the user > auth: Failed to validate the user. > Login incorrect: [garry] (from nas local port 0) > Sending Access-Reject of id 74 to 127.0.0.1:32773 > > > Anyone have pointers? I hope that helps. -- Michael Wood <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
