Package: general
Severity: critical
Justification: breaks unrelated software
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
I was watching a movie online, using VLC media player and it just
stopped playing. I lost my internet connectivity, so I checked with my mobile
phone and figured the internet connection is just fine. The debian was
completely cut off of the internet. Ping couldn't resolve any host, ifconfig
reported nothing unusual, /etc/init.d/networking restart didn't help, so I
checked in /var/log/messages and found this:
Feb 7 02:04:47 djuro-desktop kernel: [100141.008038] ------------[ cut here
]------------
Feb 7 02:04:47 djuro-desktop kernel: [100141.008054] WARNING: at
/build/buildd-linux-2.6_3.1.8-2-i386-3fqT1n/linux-2.6-3.1.8/debian/build/source_i386_none/net/sched/sch_generic.c:255
dev_watchdog+0xb1/0x104()
Feb 7 02:04:47 djuro-desktop kernel: [100141.008060] Hardware name: To Be
Filled By O.E.M.
Feb 7 02:04:47 djuro-desktop kernel: [100141.008063] NETDEV WATCHDOG: eth0
(skge): transmit queue 0 timed out
Feb 7 02:04:47 djuro-desktop kernel: [100141.008066] Modules linked in:
snd_seq_dummy ppdev lp bnep rfcomm snd_hrtimer fuse loop snd_usb_audio
snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm
snd_hwdep snd_usbmidi_lib radeon snd_seq_midi snd_seq_midi_event snd_seq ttm
drm_kms_helper cryptd drm aes_i586 joydev aes_generic snd_rawmidi snd_timer
snd_seq_device i2c_algo_bit uvcvideo power_supply ecb videodev usbhid media hid
snd iTCO_wdt btusb iTCO_vendor_support i2c_i801 i2c_core bluetooth soundcore
shpchp pci_hotplug snd_page_alloc rfkill crc16 rng_core evdev pcspkr parport_pc
parport processor button thermal_sys ext3 jbd mbcache sd_mod sr_mod crc_t10dif
cdrom ata_generic ata_piix libata scsi_mod skge uhci_hcd ehci_hcd usbcore [last
unloaded: scsi_wait_scan]
Feb 7 02:04:47 djuro-desktop kernel: [100141.008160] Pid: 0, comm: swapper Not
tainted 3.1.0-1-686-pae #1
Feb 7 02:04:47 djuro-desktop kernel: [100141.008163] Call Trace:
Feb 7 02:04:47 djuro-desktop kernel: [100141.008175] [<c1037698>] ?
warn_slowpath_common+0x68/0x79
Feb 7 02:04:47 djuro-desktop kernel: [100141.008181] [<c121f799>] ?
dev_watchdog+0xb1/0x104
Feb 7 02:04:47 djuro-desktop kernel: [100141.008188] [<c1037711>] ?
warn_slowpath_fmt+0x29/0x2d
Feb 7 02:04:47 djuro-desktop kernel: [100141.008193] [<c121f799>] ?
dev_watchdog+0xb1/0x104
Feb 7 02:04:47 djuro-desktop kernel: [100141.008213] [<c103c091>] ?
local_bh_enable+0x2/0x2
Feb 7 02:04:47 djuro-desktop kernel: [100141.008218] [<c1041bd0>] ?
run_timer_softirq+0x150/0x1f3
Feb 7 02:04:47 djuro-desktop kernel: [100141.008223] [<c121f6e8>] ?
netif_tx_unlock+0x3a/0x3a
Feb 7 02:04:47 djuro-desktop kernel: [100141.008228] [<c103c091>] ?
local_bh_enable+0x2/0x2
Feb 7 02:04:47 djuro-desktop kernel: [100141.008232] [<c103c125>] ?
__do_softirq+0x94/0x12f
Feb 7 02:04:47 djuro-desktop kernel: [100141.008236] [<c103c091>] ?
local_bh_enable+0x2/0x2
Feb 7 02:04:47 djuro-desktop kernel: [100141.008239] <IRQ> [<c103c316>] ?
irq_exit+0x32/0x80
Feb 7 02:04:47 djuro-desktop kernel: [100141.008250] [<c101dbc0>] ?
smp_apic_timer_interrupt+0x5b/0x65
Feb 7 02:04:47 djuro-desktop kernel: [100141.008257] [<c12af179>] ?
apic_timer_interrupt+0x31/0x38
Feb 7 02:04:47 djuro-desktop kernel: [100141.008265] [<c1023888>] ?
native_safe_halt+0x2/0x3
Feb 7 02:04:47 djuro-desktop kernel: [100141.008271] [<c101081e>] ?
default_idle+0x52/0x87
Feb 7 02:04:47 djuro-desktop kernel: [100141.008278] [<c100aefb>] ?
cpu_idle+0x90/0xaa
Feb 7 02:04:47 djuro-desktop kernel: [100141.008284] [<c1440708>] ?
start_kernel+0x32a/0x32f
Feb 7 02:04:47 djuro-desktop kernel: [100141.008288] ---[ end trace
42a84afd9f63b42e ]---
Feb 7 02:07:25 djuro-desktop kernel: [100298.542668] skge 0000:02:05.0: eth0:
disabling interface
Feb 7 02:07:28 djuro-desktop kernel: [100301.964099] skge 0000:02:05.0: eth0:
enabling interface
Feb 7 02:07:28 djuro-desktop kernel: [100301.974534] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Feb 7 02:07:30 djuro-desktop kernel: [100303.633003] skge 0000:02:05.0: eth0:
Link is up at 100 Mbps, full duplex, flow control both
Feb 7 02:07:30 djuro-desktop kernel: [100303.633212] ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Feb 7 02:10:10 djuro-desktop kernel: [100464.364951] skge 0000:02:05.0: eth0:
disabling interface
Feb 7 02:11:32 djuro-desktop kernel: [100545.631764] skge 0000:02:05.0: eth0:
enabling interface
Feb 7 02:11:32 djuro-desktop kernel: [100545.648744] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Feb 7 02:11:33 djuro-desktop kernel: [100547.337820] skge 0000:02:05.0: eth0:
Link is up at 100 Mbps, full duplex, flow control both
Feb 7 02:11:33 djuro-desktop kernel: [100547.338015] ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Feb 7 02:16:38 djuro-desktop kernel: [100852.047167] skge 0000:02:05.0: eth0:
Link is down
Feb 7 02:16:46 djuro-desktop kernel: [100859.942215] skge 0000:02:05.0: eth0:
Link is up at 100 Mbps, full duplex, flow control both
Feb 7 02:16:46 djuro-desktop kernel: [100859.942414] ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
* What exactly did you do (or not do) that was effective (or
ineffective)?
I described above. After that, I restarted my home router and then I
was able to ping it and log into it over the web interface, but nothing after
the router could be accessed, until the reboot.
* What was the outcome of this action?
I had to reboot the situation, because there was no other way to make
my machine connect to the internet again.
* What outcome did you expect instead?
The internet to work :)
*** End of the template - remove these lines ***
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.1.0-1-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
--
To UNSUBSCRIBE, email to debian-devel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20120207014107.2746.86924.reportbug@djuro-desktop
