Timo Juhani Lindfors <timo.lindf...@iki.fi> writes:
> I'd be interested in seeing real-life ifupdown configurations that
> handle these.
Here's an example from one of my servers that handles _some_ of them.
(Addresses rewritten to rfc3330 space, and no explicit IPv6 config):
* Two bonded ethernet interfaces for redundant layer two networking to
distinct switches. (miimon vs arp_ip_target is another discussion).
* Interfaces are added to bonding device when discovered.
* Two extra VLAN interfaces.
,----
| auto eth0 eth1 bond0 vlan101 vlan102
|
| iface eth0 inet manual
| bond-master bond0
| bond-primary eth0 eth1
|
| iface eth1 inet manual
| bond-master bond0
| bond-primary eth0 eth1
|
| iface bond0 inet static
| bond_slaves none
| bond_mode active-backup
| bond_miimon 100
| address 192.0.2.2
| netmask 255.255.255.248
| gateway 192.0.2.1
|
| iface vlan101 inet static
| vlan-raw-device bond0
| address 192.0.2.162
| netmask 255.255.255.248
|
| iface vlan102 inet static
| vlan-raw-device bond0
| address 192.0.2.170
| netmask 255.255.255.248
`----
My major gripe with ifupdown is the lack of CIDR in "address", but I can
live with that. :)
--
Stig Sandbeck Mathisen
ooo, shiny!
--
To UNSUBSCRIBE, email to debian-devel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/87sjtjmxsp....@mavis.fnord.no
