My first message was refused because it was to long. Another try...
Bastian Blank schreef:
> > On Thu, Sep 18, 2008 at 11:52:09AM +0200, Paul van der Vlis wrote:
>> >> I have it running on my amd64 machine!
> >
> > Okay.
I use now the try4 packages (amd64) on the dom0. I did not have problems
with the try3-packages.
>> >> - the VM's do not start automatically, but they start with "xm
create".
> >
> > Hmm. Please show the xend log (/var/log/xen/xend.log) from before the
> > manual start.
When I start a VM once with "xm create", the next time it starts
automatically.
>> >> - I can ping and SSH the VM from the dom0, not from the internet.
> >
> > Please use wireshark/tshark/tcpdump to find the interface where is gets
> > lost.
My problem is that I don't have a xenbr-device:
[2008-09-22 10:49:20 3031] INFO (XendNetwork:114) Not recreating missing
unmanaged network xenbr1
Special on my machine is that I use eth1 and not eth0:
------
xen:/var/log/xen# ifconfig
eth1 Link encap:Ethernet HWaddr 00:30:48:93:50:3d
inet addr:91.198.178.10 Bcast:91.198.178.255 Mask:255.255.255.0
inet6 addr: fe80::230:48ff:fe93:503d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12572 errors:0 dropped:0 overruns:0 frame:0
TX packets:7291 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9428884 (8.9 MiB) TX bytes:738404 (721.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:48 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4365 (4.2 KiB) TX bytes:4365 (4.2 KiB)
peth1 Link encap:Ethernet HWaddr 00:30:48:93:50:3d
inet6 addr: fe80::230:48ff:fe93:503d/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:12757 errors:0 dropped:0 overruns:0 frame:0
TX packets:7343 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:9626551 (9.1 MiB) TX bytes:739319 (721.9 KiB)
Memory:e8200000-e8220000
vif1.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:615 errors:0 dropped:0 overruns:0 frame:0
TX packets:2619 errors:0 dropped:8 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:37966 (37.0 KiB) TX bytes:168744 (164.7 KiB)
vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:2534 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:28 (28.0 B) TX bytes:162432 (158.6 KiB)
vif3.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:2530 errors:0 dropped:6 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:28 (28.0 B) TX bytes:162200 (158.3 KiB)
-----
> > Please make sure that the domains are restarted and not only
> > restored.
I rebooted the machine, is that enough?
> > Also please show the output of xm dmesg and dmesg.
My message became too long. You can see them here:
http://www.vandervlis.nl/log
With regards,
Paul van der Vlis.
--
http://www.vandervlis.nl/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
