I want to have a server with two Ethernet links in a redundant configuration, and to bridge it as the primary interface. So far the below is the only configuration in /etc/network/interfaces that I can get to work.
It would be cleaner and clearer if I could have a separate bond0 device specified in the interfaces file, but according to my experiments so far this seems impossible. Any advice? auto xenbr0 iface xenbr0 inet static pre-up brctl addbr xenbr0 post-down brctl delbr xenbr0 address 10.0.0.123 netmask 255.255.255.0 gateway 10.0.0.1 up modprobe bond0 up ifconfig bond0 hw ether 00:02:55:E1:36:32 up ifconfig bond0 up up ifenslave bond0 eth0 eth1 up brctl addif xenbr0 bond0 up brctl stp xenbr0 on post-down ifconfig bond0 down post-down ifenslave -d bond0 eth0 eth1 PS Please CC me as I'm a bit behind in reading my list mail. -- [EMAIL PROTECTED] http://etbe.coker.com.au/ My Blog http://www.coker.com.au/sponsorship.html Sponsoring Free Software development -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
