Hi, I am trying to use a USB-to-UART (8 port) converter. I expected it to get recognized and create device names like /dev/ttyUSB0, /dev/ttyUSB1 ...../dev/ttyUSB7. However, this did not happen.
[Surprisingly, the single USB-to-UART (1 port) converter works fine and /dev/ttyUSB0 is available for my use] I did # dmesg | tail and found the following output... ---------------------------------------------------------- hub.c: USB hub found hub.c: 4 ports detected hub.c: new USB device 00:1d.1-1.1, assigned address 3 usb.c: USB device 3 (vend/prod 0x403/0x6010) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.2, assigned address 4 usb.c: USB device 4 (vend/prod 0x403/0x6010) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.3, assigned address 5 usb.c: USB device 5 (vend/prod 0x403/0x6010) is not claimed by any active driver. hub.c: new USB device 00:1d.1-1.4, assigned address 6 usb.c: USB device 6 (vend/prod 0x403/0x6010) is not claimed by any active driver. --------------------------------------------------------------- Does anyone know what this means? Can anybody help me with getting my USB-to-UART working? The converter that I am using is from "vscom". I downloaded some driver from their website for linux. But, these drivers does not build. Has anyone faced similar problem? with regards, - KOS -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
