wqinian rao 提到: >好不容易把nvidia装上，结果安装x的时候（以前什么X都没有装）现在才开始装X包，比如task-x-window-system-core >等， >但是安装task-x-window-system却要把xfree86等删了才能装那两个rstart >and rstartd，但是装了后再装task-x-window-system >的时候又要xfree86等，又要把rstart and >rstartd删了。如此反复 >不知道如何装了。我就没有装task-x-window-system,用 >dpkg-reconfigure > I never like the virtual package like task-x-window-system. To much dependence problem. If you are using sid, I know the x-window-system package work.
>xserver-xfree86，应该配置没有错吧，选那个什么的时候我选nvidia没有错吧？安装完，我运行startx的时候却说Failed >to initialize the Nvdriver kernel module，和 >XIO:fatal 20 error 104(Connection reset by peer) on >Xserver ":0:0"after 0 request (0 know processed) with 0 events remainiy >如果运行XFree86就出现Failed to initialize the Nvdriver >kernel module和Fatal server error no screens found >请问是哪里出错了？？我在dpkg-reconfigure的时候，好象问了个显卡的bus吧，我没有写，因为lspci没有显示那格式啊，比如 >pic:xx:xx:xx只有最开始显示01:00.0，我这样输进去，结果却 > after you install the module for nvdriver did you load it? run $>lsmod see you loaded it, if not $>modconf and load that. if you have kernel-module loaded and X wouldn't start the X driver may not work with the kernel-module. run $>XFree86 -configure as root, that will give you a config file in root home, match and see the different with your /etc/X11/XF86Config-4 file. Usually it will get the pci scan done for you also. Good luck Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- | This message was re-posted from debian-chinese-big5@lists.debian.org | and converted from big5 to gb2312 by an automatic gateway. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
