Hi,
You are noted as the last translator of the debconf translation for
grub2.
GRUB 2 package templates are likely to be important ones for Squeeze because
of issues related to upgrading from GRUB legacy.
Indeed, they're important enough for being counted as part of "D-I level 2"
even though not strictly related to D-I.
I issue this specific call for translaiton updates because technical issues
prevent
us from including grub2 package debconf statistics in the standard D-I
statistics and pages.
I would be grateful if you could take the time and update it.
Please send the updated file as a wishlist bug
against grub2. PLEASE AVOID SENDING IT DIRECTLY TO ME.
There is no strict deadline for receiving the updated translation.
Thanks in advance,
# Copyright (C) 2009 Tetralet
# This file is distributed under the same license as the grub2 package.
#
msgid ""
msgstr ""
"Project-Id-Version: grub2\n"
"Report-Msgid-Bugs-To: gr...@packages.debian.org\n"
"POT-Creation-Date: 2010-07-02 12:55+0100\n"
"PO-Revision-Date: 2009-02-02 12:05+0800\n"
"Last-Translator: Tetralet <tetra...@gmail.com>\n"
"Language-Team: Debian-user in Chinese [Big5] <debian-chinese-b...@lists."
"debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "是否使用來自 menu.list 的 chainload 項目？"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr "GRUB 昇級程式已在 /boot/grub 裡找到了 GRUB 的 Legacy 設定。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to chainload GRUB 2 from "
"your existing GRUB Legacy setup. This step may be automaticaly performed "
"now."
msgstr ""
"為了要能取代您系統上 Legacy 版的 GRUB，建議能修改 /boot/grub/menu.lst 來讓您"
"原本的 GRUB Legacy 設定能以 chainload 的方式啟動 GRUB 2。現在將要自動進行這個"
"步驟。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that your new GRUB 2 setup is functional for you, before you install "
"it directly to your MBR (Master Boot Record)."
msgstr ""
"在直接將 GRUB 2 安裝到 MBR（主要開機記錄）之前，建議您能同意在 menu.lst 裡先"
"以 chainload 的方式啟動 GRUB 2，來確認您新的 GRUB 2 設定的能正常運作。"
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In either case, whenever you want GRUB 2 to be loaded directly from MBR, you "
"can do so by issuing (as root) the following command:"
msgstr ""
"不管您要採取何種方式，當您想讓 GRUB 2 可以由 MBR 直接啟動的話，您可以（以 "
"root 身份）執行以下的指令："
#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB, ${MODEL})"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "GRUB installation failed. Continue?"
msgstr ""
#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway? If you do, your computer may not start up "
"properly."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid "GRUB installation failed. Try again?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device. Otherwise, the upgrade "
"from GRUB Legacy will be cancelled."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"You chose not to install GRUB to any devices. If you continue, the boot "
"loader may not be properly configured, and when your computer next starts up "
"it will use whatever was previously in the boot sector. If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"If you are already running a different boot loader and want to carry on "
"doing so, or if this is a special environment where you do not need a boot "
"loader, then you should continue anyway. Otherwise, you should install GRUB "
"somewhere."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files. If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""
#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Linux 命令列："
#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"以下的 Linux 命令列是由 /etc/default/grub，或是由 GRUB Legacy 的 menu.lst 中"
"的 `kopt' 參數所擷取出來的。請確認它是否正確，若有必要請加以修改。"
#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Linux 預設命令列："
#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr ""
"以下的字串將會用在預設的選單項目中做為 Linux 參數，但不會用於回復模式。"
#. Type: string
#. Description
#: ../templates.in:3001
msgid "kFreeBSD command line:"
msgstr "kFreeBSD 命令列："
#. Type: string
#. Description
#: ../templates.in:3001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst. Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"以下的 kFreeBSD 命令列是由 /etc/default/grub，或是由 GRUB Legacy 的 menu.lst "
"中的 `kopt' 參數所擷取出來的。請確認它是否正確，若有必要請加以修改。"
#. Type: string
#. Description
#: ../templates.in:4001
msgid "kFreeBSD default command line:"
msgstr "kFreeBSD 預設命令列："
#. Type: string
#. Description
#: ../templates.in:4001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr ""
"以下的字串將會用在預設的選單項目中做為 kFreeBSD 參數，但不會用於回復模式。"
#. Type: note
#. Description
#: ../templates.in:5001
msgid "/boot/grub/device.map has been regenerated"
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"The file /boot/grub/device.map has been rewritten to use stable device "
"names. In most cases, this should significantly reduce the need to change "
"it in future, and boot menu entries generated by GRUB should not be affected."
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"However, since you have more than one disk in your system, it is possible "
"that you were depending on the old device map. Please check whether you "
"have any custom boot menu entries that rely on GRUB's (hdN) drive numbering, "
"and update them if necessary."
msgstr ""
#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"If you do not understand this message, or if you do not have any custom boot "
"menu entries, you can ignore this message."
msgstr ""
