--- Alex Lau <[EMAIL PROTECTED]> 的正文：> wqinian rao 提到: > >好不容易把nvidia裝上，結果安裝x的時候（以前什麼X都沒有裝）現在才開始裝X包，比如task-x-window-system-core > >等， > >但是安裝task-x-window-system卻要把xfree86等刪了才能裝那兩個rstart > >and rstartd，但是裝了後再裝task-x-window-system > >的時候又要xfree86等，又要把rstart and > >rstartd刪了。如此反復 > >不知道如何裝了。我就沒有裝task-x-window-system,用 > >dpkg-reconfigure > > > I never like the virtual package like > task-x-window-system. > To much dependence problem. If you are using sid, I > know the > x-window-system package work. > > >xserver-xfree86，應該配置沒有錯吧，選那個什麼的時候我選nvidia沒有錯吧？安裝完，我運行startx的時候卻說Failed > >to initialize the Nvdriver kernel module，和 > >XIO:fatal 20 error 104(Connection reset by peer) on > >Xserver ":0:0"after 0 request (0 know processed) > with 0 events remainiy > >如果運行XFree86就出現Failed to initialize the > Nvdriver > >kernel module和Fatal server error no screens found > >請問是哪裡出錯了？？我在dpkg-reconfigure的時候，好象問了個顯卡的bus吧，我沒有寫，因為lspci沒有顯示那格式啊，比如 > >pic:xx:xx:xx只有最開始顯示01:00.0，我這樣輸進去，結果卻 > > > after you install the module for nvdriver did you > load it? > run $>lsmod see you loaded it, if not $>modconf and > load that. > if you have kernel-module loaded and X wouldn't > start > the X driver may not work with the kernel-module. > run $>XFree86 -configure as root, that will give you > a config file > in root home, match and see the different with your > /etc/X11/XF86Config-4 file. > Usually it will get the pci scan done for you also. > Good luck > Alex
您好： 我也照你這樣做了，lsmod的確沒有看見nvidia有關的，但是用modconf也沒有找到啊，用XFree86 -configure 是給我了配置文件，但是執行這個命令的時候說mouse有問題，又說能找 到mouse，我ln -s /dev/psaux /dev/mouse是對的吧。。 請問到底我哪裡出錯了呢？？ _________________________________________________________ Do You Yahoo!? 體壇明星嘯聚繽紛賽場 精彩時刻盡在雅虎體育 http://cn.sports.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- | This message was re-posted from [email protected] | and converted from gb2312 to big5 by an automatic gateway. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
