Package: installation-reports Boot method: USB stick Image version: https://cdimage.debian.org/cdimage/weekly-builds/ppc64el/iso-dvd/debian-testing-ppc64el-DVD-1.iso (2023-01-02 07:30) Date: 2023-01-05 22H00
Machine: Tyan TN71-BP012 Processor: ppc64el POWER8 (raw), altivec supported Memory: 133598MB Partitions: <df -Tl will do; the raw partition table is preferred> Sys. de fichiers Type blocs de 1K Utilisé Disponible Uti% Monté sur udev devtmpfs 63413824 0 63413824 0% /dev tmpfs tmpfs 13358656 16896 13341760 1% /run /dev/sda2 ext4 238263032 3936368 222150744 2% / tmpfs tmpfs 66793024 0 66793024 0% /dev/shm tmpfs tmpfs 5120 0 5120 0% /run/lock tmpfs tmpfs 13358592 768 13357824 1% /run/user/1000 Output of lspci -knn (or lspci -nn): 0000:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc] 0001:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc] 0001:01:00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:01.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:02.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:08.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:09.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:0a.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:10.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:02:11.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] (rev ca) Subsystem: PLX Technology, Inc. PEX 8748 48-Lane, 12-Port PCI Express Gen 3 (8 GT/s) Switch, 27 x 27mm FCBGA [10b5:8748] 0001:03:00.0 Ethernet controller [0200]: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:1007] Subsystem: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:0050] Kernel driver in use: mlx4_core Kernel modules: mlx4_core 0001:04:00.0 Ethernet controller [0200]: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:1007] Subsystem: Mellanox Technologies MT27520 Family [ConnectX-3 Pro] [15b3:0050] Kernel driver in use: mlx4_core Kernel modules: mlx4_core 0001:05:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] (rev 11) Subsystem: Marvell Technology Group Ltd. 88SE9235 PCIe 2.0 x2 4-port SATA 6 Gb/s Controller [1b4b:9235] Kernel driver in use: ahci Kernel modules: ahci 0001:06:00.0 USB controller [0c03]: Texas Instruments TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller [104c:8241] (rev 02) Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 0001:07:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03) Subsystem: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] 0001:08:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30) Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] Kernel driver in use: ast Kernel modules: ast 0002:00:00.0 PCI bridge [0604]: IBM POWER8 Host Bridge (PHB3) [1014:03dc] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect media: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] *poweroff don't stop the computer Comments/Problems: On installed system poweroff don't work. When installing the system reboot work fine but, on installed system the system is unable to poweroff the computer, try: systemctl poweroff (with logged user on the computer from keyboard on the computer in terminal under XFCE) get on serial port: [ OK ] Stopped Set Up Additional Binary Formats. [ OK ] Stopped Network Time Synchronization. [ OK ] Unset automount Arbitrary …s File System Automount Point. [ OK ] Stopped Record System Boot/Shutdown in UTMP. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting /run/credentials/systemd-sysusers.service... Unmounting /run/credential…temd-tmpfiles-setup.service... Unmounting /run/credential…-tmpfiles-setup-dev.service... [ OK ] Unmounted /run/credentials/systemd-sysusers.service. [ OK ] Unmounted /run/credentials…md-tmpfiles-setup-dev.service. [ OK ] Unmounted /run/credentials…ystemd-tmpfiles-setup.service. [ OK ] Stopped target Preparation for Local File Systems. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target System Shutdown. [ OK ] Reached target Late Shutdown Services. [ OK ] Finished System Power Off. [ OK ] Reached target System Power Off. [ 325.849610] systemd-shutdown[1]: Syncing filesystems and block devices. [ 325.869592] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 325.889810] systemd-journald[723]: Received SIGTERM from PID 1 (systemd-shutdow). [ 325.913699] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 325.933782] systemd-shutdown[1]: Unmounting file systems. [ 325.934436] [2108]: Remounting '/' read-only with options 'errors=remount-ro'. [ 325.944300] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 325.946959] systemd-shutdown[1]: All filesystems unmounted. [ 325.946989] systemd-shutdown[1]: Deactivating swaps. [ 325.947049] systemd-shutdown[1]: All swaps deactivated. [ 325.947075] systemd-shutdown[1]: Detaching loop devices. [ 325.947311] systemd-shutdown[1]: All loop devices detached. [ 325.947339] systemd-shutdown[1]: Stopping MD devices. [ 325.947592] systemd-shutdown[1]: All MD devices stopped. [ 325.947618] systemd-shutdown[1]: Detaching DM devices. [ 325.947760] systemd-shutdown[1]: All DM devices detached. [ 325.947786] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. [ 325.949711] systemd-shutdown[1]: Syncing filesystems and block devices. [ 325.950059] systemd-shutdown[1]: Powering off. on screen: Brodcast message from user@debian on pts/0 (Thu 2023-01-05 23:03:40 CET): The system will power off now! But the system don't stop Via Megarac SP: Power Off Server - Orderly Shutdown Don't work with: Performing soft power off failed. This may be because the host OS is taking unusual long time to gracefully shut down. Via Megarac SP: Power Off Server - Immediate Work to power off the computer. Pressing power button for 10 second work too. Was working as excepted under Debian 11.6 and before. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1027848 Feel free to ask if more information needed, Best regards Olivier
