I unsubscribed from these two lists four days back. I sent a mail to [EMAIL PROTECTED] with the word "unsubscribe" in subject line. Received a mail for confirmation, which I did. And the mails didnot stop. So I carried out the same process all over again. No change. Exactly the same happened with [EMAIL PROTECTED]
I mailed [EMAIL PROTECTED] with this... and NO help. Now I have decided to annoy the lists by this mail until someone unsubscribes me off... either debian-xxx-request or listmaster. Only related parties to reply please. ***** NO THIRD PARTY COMMENTS PLEASE ***** -----Original Message----- From: Hans [mailto:[EMAIL PROTECTED] Sent: 22 April 2003 15:34 To: debian-boot@lists.debian.org Subject: Please help ! Hello dear install-team, I have a problem with my installation (Debian 3.0) and although I read all the documentation, I couldnt find the answer. You are my last chance ! The problem is the following: In my servers (Siemens, Prymergy L200) there are two SCSI-controllers, one is a Symbios , the other is an Adaptec 2840. When I want to start, the Symbios controller is been found, and the Adaptec not. But, on the connected at the Adaptec controllers are the diskdrives. Either kernel bf24, vanilla, compact, pci ore anything else will load the modules for the controllers at boot. And that is , where the problem is: I cannot install the System, as there are no drives to be seen by the installation system. Also it is not possible to load the required module manually. The system refuses to load the module. Okay, what did I do ? I made the driverdisks as described in the howtos. But, system refused to mount the floppy-drive (/dev/fd0) Now, my suggested solution is, to create a install-kernel with Adaptec-controller built in. Do you have another solution ? Maybe it is possible to create a rescuedisk with selfmade-kernel ??? Can you help me ? If not, please transfer this mail to someone you know he can ! Thank you very much in advance ! Sincerley Hans-J. Ullrich [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] This mail has originated outside your organization, either from an external partner or the Global Internet. Keep this in mind if you answer this message. This e-mail is intended only for the above addressee. It may contain privileged information. If you are not the addressee you must not copy, distribute, disclose or use any of the information in it. If you have received it in error please delete it and immediately notify the sender. Security Notice: all e-mail, sent to or from this address, may be accessed by someone other than the recipient, for system management and security reasons. This access is controlled under Regulation of Investigatory Powers Act 2000, Lawful Business Practises.
