|
Hi debian-cd,
I had a debian 2.2r3 i386 installed and updated to 2.2r5 and 2.2r6 (no problems, debian upgrading is amazing !)
I wanted to change also the kernel So from cd 1_NONUS I typed apt-get install kernel-image-2.2.19 (or something ...)
Everything seemed OK /vmlinuz -> /boot/vmlinuz-2.2.19 /vmlinuz.old -> /boot/vmlinuz-2.2.19pre17 booting from lilo for both new and old kernels is OK. (lilo fine thanks ; dmesg stored in files lilo1 and lilo2) booting from cd 1 2.2r3 (and type rescue root=/dev/sda2 vga=6) is OK (file dmesg_cd1_2.2r3)
booting from cd 1_NONUS 2.2r6 (and type rescue root=/dev/sda2 vga=6) is not OK (file dmesg_cd1_2.2r6) lots of messages kind : insmod: /lib/modules/2.2.19/misc/unix.o: insmod net-pf-1 failed depmod: *** unresolved symbols in /lib/modules/2.2.19/usb/* (15 lines following ...) depmod: /ntfs.0
I checked dmesg files and it seems version dates are differents for this new kernel ;
so, what’s goes wrong ? is it the proper kernel ? what must I do ? mayday !
thank you
M.B. |
Linux version 2.2.19 (herbert@gondolin) (gcc version 2.7.2.3) #1 Wed Mar 20 19:41:41
EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0feec000 @ 00100000 (usable)
Detected 1333438 kHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 2660.76 BogoMIPS
Memory: 256800k/262064k available (1744k kernel code, 416k reserved, 2948k data, 156k
init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0d40
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
hda: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/11/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1008
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
Vendor: HP Model: HP35470A Rev: 4 09
Type: Sequential-Access ANSI SCSI revision: 02
scsi : detected 3 SCSI cdroms 1 SCSI disk total.
(scsi0:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Uniform CD-ROM driver Revision: 3.11
(scsi0:0:3:0) Synchronous at 20.0 Mbyte/sec, offset 16.
sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
(scsi0:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 16.
sr2: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
(scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
hda: hda1 hda2 hda3 < hda5 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 156k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 289128k swap-space (priority -1)
NTFS version 000607
Linux version 2.2.19pre17 (herbert@arnor) (gcc version 2.7.2.3) #1 Tue Mar 13 22:37:59
EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0feec000 @ 00100000 (usable)
Detected 1333408 kHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 2660.76 BogoMIPS
Memory: 256808k/262064k available (1744k kernel code, 412k reserved, 2944k data, 156k
init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0d40
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
hda: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/11/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:1) Synchronous at 160.0 Mbyte/sec, offset 63.
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
(scsi0:0:2:1) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1008
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
(scsi0:0:3:1) Synchronous at 20.0 Mbyte/sec, offset 16.
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
(scsi0:0:5:1) Synchronous at 20.0 Mbyte/sec, offset 16.
Vendor: HP Model: HP35470A Rev: 4 09
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:0:6:1) Synchronous at 5.0 Mbyte/sec, offset 8.
scsi : detected 3 SCSI cdroms 1 SCSI disk total.
Uniform CD-ROM driver Revision: 3.11
sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
hda: hda1 hda2 hda3 < hda5 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 156k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 289128k swap-space (priority -1)
NTFS version 000607
Linux version 2.2.19 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Jun 9 13:04:06
EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0feec000 @ 00100000 (usable)
Detected 1333438 kHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 2660.76 BogoMIPS
Memory: 256808k/262064k available (1744k kernel code, 412k reserved, 2944k data, 156k
init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0d40
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
hda: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/11/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1008
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
Vendor: HP Model: HP35470A Rev: 4 09
Type: Sequential-Access ANSI SCSI revision: 02
scsi : detected 3 SCSI cdroms 1 SCSI disk total.
(scsi0:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Uniform CD-ROM driver Revision: 3.11
(scsi0:0:3:0) Synchronous at 20.0 Mbyte/sec, offset 16.
sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
(scsi0:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 16.
sr2: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
(scsi0:0:0:0) Synchronous at 160.0 Mbyte/sec, offset 63.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
hda: hda1 hda2 hda3 < hda5 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 156k freed
kmod: runaway modprobe loop assumed and stopped
Adding Swap: 289128k swap-space (priority -1)
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
Linux version 2.2.19pre17 (herbert@arnor) (gcc version 2.7.2.3) #1 Tue Mar 13 22:37:59
EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0feec000 @ 00100000 (usable)
Detected 1333396 kHz processor.
Console: colour VGA+ 80x60
Calibrating delay loop... 2660.76 BogoMIPS
Memory: 256808k/262064k available (1744k kernel code, 412k reserved, 2944k data, 156k
init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0d40
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
hda: IC35L040AVER07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 0/11/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 396 instructions downloaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:1) Synchronous at 160.0 Mbyte/sec, offset 63.
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
(scsi0:0:2:1) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1008
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
(scsi0:0:3:1) Synchronous at 20.0 Mbyte/sec, offset 16.
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
(scsi0:0:5:1) Synchronous at 20.0 Mbyte/sec, offset 16.
Vendor: HP Model: HP35470A Rev: 4 09
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:0:6:1) Synchronous at 5.0 Mbyte/sec, offset 8.
scsi : detected 3 SCSI cdroms 1 SCSI disk total.
Uniform CD-ROM driver Revision: 3.11
sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
sr2: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
hda: hda1 hda2 hda3 < hda5 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 156k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 289128k swap-space (priority -1)
NTFS version 000607
