Your message dated Tue, 27 Mar 2007 10:32:03 +0000
with message-id <[EMAIL PROTECTED]>
and subject line Bug#416231: fixed in libapache2-mod-perl2 2.0.2-2.4
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: apache2
Version: 2.2.3-3.3
Severity: serious
Apache's behavior on upgrades from Sarge is quite ugly. It initially does
get stopped correctly, but after that there are two more attempts to stop
it with quite scary messages.
And then it fails to start when the new packages are being set up.
Starting apache manually (/etc/init.d/apache2 start) after the upgrade is
completed does succeed without problems.
I have tested this in vmware with a totally default Sarge installation
with all server tasks selected; no additional custom apache configuration
was done.
A full log of the upgrade with the problem spots marked is available at:
http://people.debian.org/~fjp/tmp/upgrade_server.html
The most relevant section is also attached.
[...]
Preparing to replace libapache2-mod-perl2 1.999.21-1 (using .../libapache2-mod-perl2_2.0.2-2.3_i386.deb) ...
Unpacking replacement libapache2-mod-perl2 ...
dpkg: apache2-common: dependency problems, but removing anyway as you request:
apache2-mpm-prefork depends on apache2-common (= 2.0.54-5sarge1); however:
Package apache2-common is to be removed.
(Reading database ... 47277 files and directories currently installed.)
Removing apache2-common ...
Stopping web server: Apache2.
(Reading database ... 46905 files and directories currently installed.)
Preparing to replace apache2-mpm-prefork 2.0.54-5sarge1 (using .../apache2-mpm-prefork_2.2.3-3.3_i386.deb) ...
Stopping web server: Apache2 ... failed!
You may still have some apache2 processes running. There are
processes named 'apache2' which do not match your pid file,
and in the name of safety, we've left them alone. Please review
the situation by hand.
.
Stopping web server: Apache2 ... failed!
You may still have some apache2 processes running. There are
processes named 'apache2' which do not match your pid file,
and in the name of safety, we've left them alone. Please review
the situation by hand.
.
Unpacking replacement apache2-mpm-prefork ...
Preparing to replace sed 4.1.2-8 (using .../archives/sed_4.1.5-1_i386.deb) ...
Unpacking replacement sed ...
Setting up sed (4.1.5-1) ...
(Reading database ... 46908 files and directories currently installed.)
Preparing to replace libapache2-mod-php4 4:4.3.10-19 (using .../libapache2-mod-php4_6%3a4.4.4-8+etch1_i386.deb) ...
Unpacking replacement libapache2-mod-php4 ...
Preparing to replace php4-common 4:4.3.10-19 (using .../php4-common_6%3a4.4.4-8+etch1_i386.deb) ...
Unpacking replacement php4-common ...
Preparing to replace apache2-utils 2.0.54-5sarge1 (using .../apache2-utils_2.2.3-3.3_i386.deb) ...
Unpacking replacement apache2-utils ...
Selecting previously deselected package apache2.2-common.
Unpacking apache2.2-common (from .../apache2.2-common_2.2.3-3.3_i386.deb) ...
Stopping web server: Apache2 ... failed!
You may still have some apache2 processes running. There are
processes named 'apache2' which do not match your pid file,
and in the name of safety, we've left them alone. Please review
the situation by hand.
.
[...]
Setting up apache2-utils (2.2.3-3.3) ...
Setting up apache2.2-common (2.2.3-3.3) ...
Installing new version of config file /etc/apache2/envvars ...
Installing new version of config file /etc/apache2/apache2.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy.load ...
Installing new version of config file /etc/apache2/mods-available/proxy_connect.load ...
Installing new version of config file /etc/apache2/mods-available/mem_cache.load ...
Installing new version of config file /etc/apache2/mods-available/dav_fs.conf ...
Installing new version of config file /etc/apache2/mods-available/disk_cache.load ...
Installing new version of config file /etc/apache2/mods-available/ssl.conf ...
Installing new version of config file /etc/apache2/mods-available/dav_fs.load ...
Installing new version of config file /etc/apache2/mods-available/userdir.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy_ftp.load ...
Installing new version of config file /etc/apache2/mods-available/proxy_http.load ...
Installing new version of config file /etc/apache2/mods-available/mime_magic.conf ...
Installing new version of config file /etc/apache2/mods-available/file_cache.load ...
Installing new version of config file /etc/apache2/mods-available/cgid.conf ...
Installing new version of config file /etc/apache2/mods-available/proxy.conf ...
Installing new version of config file /etc/apache2/sites-available/default ...
Installing new version of config file /etc/init.d/apache2 ...
Module alias installed; run /etc/init.d/apache2 force-reload to enable.
Module autoindex installed; run /etc/init.d/apache2 force-reload to enable.
Module dir installed; run /etc/init.d/apache2 force-reload to enable.
Module env installed; run /etc/init.d/apache2 force-reload to enable.
Module mime installed; run /etc/init.d/apache2 force-reload to enable.
Module negotiation installed; run /etc/init.d/apache2 force-reload to enable.
Module setenvif installed; run /etc/init.d/apache2 force-reload to enable.
Module status installed; run /etc/init.d/apache2 force-reload to enable.
Module auth_basic installed; run /etc/init.d/apache2 force-reload to enable.
Module authz_default installed; run /etc/init.d/apache2 force-reload to enable.
Module authz_user installed; run /etc/init.d/apache2 force-reload to enable.
Module authz_groupfile installed; run /etc/init.d/apache2 force-reload to enable.
Module authn_file installed; run /etc/init.d/apache2 force-reload to enable.
Module authz_host installed; run /etc/init.d/apache2 force-reload to enable.
Setting up apache2-mpm-prefork (2.2.3-3.3) ...
Starting web server (apache2)... failed!
invoke-rc.d: initscript apache2, action "start" failed.
Setting up apache2 (2.2.3-3.3) ...
Setting up libapache2-mod-python (3.2.10-4) ...
[...]
pgpE3UHNGNalR.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
Source: libapache2-mod-perl2
Source-Version: 2.0.2-2.4
We believe that the bug you reported is fixed in the latest version of
libapache2-mod-perl2, which is due to be installed in the Debian FTP archive:
libapache2-mod-perl2-dev_2.0.2-2.4_i386.deb
to
pool/main/liba/libapache2-mod-perl2/libapache2-mod-perl2-dev_2.0.2-2.4_i386.deb
libapache2-mod-perl2-doc_2.0.2-2.4_i386.deb
to
pool/main/liba/libapache2-mod-perl2/libapache2-mod-perl2-doc_2.0.2-2.4_i386.deb
libapache2-mod-perl2_2.0.2-2.4.diff.gz
to pool/main/liba/libapache2-mod-perl2/libapache2-mod-perl2_2.0.2-2.4.diff.gz
libapache2-mod-perl2_2.0.2-2.4.dsc
to pool/main/liba/libapache2-mod-perl2/libapache2-mod-perl2_2.0.2-2.4.dsc
libapache2-mod-perl2_2.0.2-2.4_i386.deb
to pool/main/liba/libapache2-mod-perl2/libapache2-mod-perl2_2.0.2-2.4_i386.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Steve Langasek <[EMAIL PROTECTED]> (supplier of updated libapache2-mod-perl2
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Tue, 27 Mar 2007 01:48:55 -0700
Source: libapache2-mod-perl2
Binary: libapache2-mod-perl2 libapache2-mod-perl2-doc libapache2-mod-perl2-dev
Architecture: source i386
Version: 2.0.2-2.4
Distribution: unstable
Urgency: high
Maintainer: Thom May <[EMAIL PROTECTED]>
Changed-By: Steve Langasek <[EMAIL PROTECTED]>
Description:
libapache2-mod-perl2 - Integration of perl with the Apache2 web server
libapache2-mod-perl2-dev - Integration of perl with the Apache2 web server -
development fil
libapache2-mod-perl2-doc - Integration of perl with the Apache2 web server -
documentation
Closes: 416231
Changes:
libapache2-mod-perl2 (2.0.2-2.4) unstable; urgency=high
.
* Non-maintainer upload.
* High-urgency upload for RC bugfix.
* Drop /etc/apache2/mods-available/perl.conf as a conffile, since it no
longer contains anything of relevance; instead, manually remove the file
on purge if present, and in the preinst handle upgrading it to remove the
automatically created bits that conflict with apache2.2 so that this
conversion is done in time for the apache2.2-mpm-* configuration to run.
Closes: #416231.
Files:
a02fc28db47b42bf226ed7a4e80d5469 970 web optional
libapache2-mod-perl2_2.0.2-2.4.dsc
30f35f2eb1c21faa8ea4e86f8adb5196 9974 web optional
libapache2-mod-perl2_2.0.2-2.4.diff.gz
8bb293af9a0543273a67dc0147519869 1081602 web optional
libapache2-mod-perl2_2.0.2-2.4_i386.deb
41d535ee054c6faece6f413d9c771ec1 75624 web optional
libapache2-mod-perl2-dev_2.0.2-2.4_i386.deb
98912365ebec068606303ab7d1aa92ef 3107530 web optional
libapache2-mod-perl2-doc_2.0.2-2.4_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFGCOf0KN6ufymYLloRAuOqAJ9iwbZRvb/IFjArQTbnbF17unDd9QCgynab
4VsI/+GEu9tpcA7t9OJThwY=
=1u2j
-----END PGP SIGNATURE-----
--- End Message ---
