Your message dated Sat, 10 Feb 2007 10:02:29 +0000
with message-id <[EMAIL PROTECTED]>
and subject line Bug#395858: fixed in libfile-homedir-perl 0.64-1
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: libfile-homedir-perl
Version: 0.56-1
Severity: serious
Hello,
There was a problem while autobuilding your package:
> Automatic build of libfile-homedir-perl_0.56-1 on avidan by sbuild/i386 98
> Build started at 20061028-0017
> ******************************************************************************
> Checking available source versions...
> Fetching source files...
> Reading package lists...
> Building dependency tree...
> Need to get 33.6kB of source archives.
> Get:1 http://ftp.fr.debian.org sid/main libfile-homedir-perl 0.56-1 (dsc)
> [677B]
> Get:2 http://ftp.fr.debian.org sid/main libfile-homedir-perl 0.56-1 (tar)
> [31.3kB]
> Get:3 http://ftp.fr.debian.org sid/main libfile-homedir-perl 0.56-1 (diff)
> [1616B]
> Fetched 33.6kB in 0s (112kB/s)
> Download complete and in download only mode
> ** Using build dependencies supplied by package:
> Build-Depends: debhelper (>= 4.0.0)
> Build-Depends-Indep: perl (>= 5.8.0-7), libtest-pod-perl
> Checking for already installed source dependencies...
> debhelper: missing
> perl: already installed (5.8.8-6.1 >= 5.8.0-7 is satisfied)
> libtest-pod-perl: missing
> Checking for source dependency conflicts...
> /usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install
> debhelper libtest-pod-perl
> Reading package lists...
> Building dependency tree...
> The following extra packages will be installed:
> file gettext gettext-base html2text intltool-debian libio-stringy-perl
> libmagic1 libpod-escapes-perl libpod-simple-perl po-debconf
> Suggested packages:
> dh-make cvs gettext-doc
> Recommended packages:
> curl wget lynx libmail-sendmail-perl libcompress-zlib-perl
> The following NEW packages will be installed:
> debhelper file gettext gettext-base html2text intltool-debian
> libio-stringy-perl libmagic1 libpod-escapes-perl libpod-simple-perl
> libtest-pod-perl po-debconf
> 0 upgraded, 12 newly installed, 0 to remove and 0 not upgraded.
> Need to get 0B/3497kB of archives.
> After unpacking 11.1MB of additional disk space will be used.
> Selecting previously deselected package gettext-base.
> (Reading database ... 9958 files and directories currently installed.)
> Unpacking gettext-base (from .../gettext-base_0.15-2_i386.deb) ...
> Selecting previously deselected package libmagic1.
> Unpacking libmagic1 (from .../libmagic1_4.17-4_i386.deb) ...
> Selecting previously deselected package file.
> Unpacking file (from .../archives/file_4.17-4_i386.deb) ...
> Selecting previously deselected package html2text.
> Unpacking html2text (from .../html2text_1.3.2a-3_i386.deb) ...
> Selecting previously deselected package gettext.
> Unpacking gettext (from .../gettext_0.15-2_i386.deb) ...
> Selecting previously deselected package intltool-debian.
> Unpacking intltool-debian (from
> .../intltool-debian_0.35.0+20060710.1_all.deb) ...
> Selecting previously deselected package po-debconf.
> Unpacking po-debconf (from .../po-debconf_1.0.7_all.deb) ...
> Selecting previously deselected package debhelper.
> Unpacking debhelper (from .../debhelper_5.0.40_all.deb) ...
> Selecting previously deselected package libio-stringy-perl.
> Unpacking libio-stringy-perl (from .../libio-stringy-perl_2.110-1_all.deb) ...
> Selecting previously deselected package libpod-escapes-perl.
> Unpacking libpod-escapes-perl (from .../libpod-escapes-perl_1.04-1_all.deb)
> ...
> Selecting previously deselected package libpod-simple-perl.
> Unpacking libpod-simple-perl (from .../libpod-simple-perl_3.04-1_all.deb) ...
> Selecting previously deselected package libtest-pod-perl.
> Unpacking libtest-pod-perl (from .../libtest-pod-perl_1.24-1_all.deb) ...
> Setting up gettext-base (0.15-2) ...
>
> Setting up libmagic1 (4.17-4) ...
>
> Setting up file (4.17-4) ...
> Setting up html2text (1.3.2a-3) ...
>
> Setting up gettext (0.15-2) ...
>
> Setting up intltool-debian (0.35.0+20060710.1) ...
> Setting up po-debconf (1.0.7) ...
> Setting up debhelper (5.0.40) ...
> Setting up libio-stringy-perl (2.110-1) ...
>
> Setting up libpod-escapes-perl (1.04-1) ...
> Setting up libpod-simple-perl (3.04-1) ...
> Setting up libtest-pod-perl (1.24-1) ...
> Checking correctness of source dependencies...
> Toolchain package versions: libc6-dev_2.3.6.ds1-7
> linux-kernel-headers_2.6.18-6 gcc-4.1_4.1.1-17 g++-4.1_4.1.1-17
> binutils_2.17-3 libstdc++6-4.1-dev_4.1.1-17 libstdc++6_4.1.1-17
> ------------------------------------------------------------------------------
> gpg: Signature made Wed Mar 22 23:09:19 2006 CET using DSA key ID 5D64F870
> gpg: Can't check signature: public key not found
> dpkg-source: extracting libfile-homedir-perl in libfile-homedir-perl-0.56
> dpkg-source: unpacking libfile-homedir-perl_0.56.orig.tar.gz
> dpkg-source: applying /home/buildd/build/libfile-homedir-perl_0.56-1.diff.gz
> dpkg-buildpackage: source package is libfile-homedir-perl
> dpkg-buildpackage: source version is 0.56-1
> dpkg-buildpackage: host architecture i386
> dpkg-buildpackage: source version without epoch 0.56-1
> /usr/bin/fakeroot debian/rules clean
> dh_testdir
> dh_testroot
> rm -f build-stamp
> [ ! -f Makefile ] || /usr/bin/make realclean
> dh_clean
> debian/rules build
> dh_testdir
> /usr/bin/perl Makefile.PL INSTALLDIRS=vendor
> *** Module::AutoInstall version 1.02
> *** Checking for Perl dependencies...
> [Core Features]
> - Test::More ...loaded. (0.62 >= 0.47)
> - File::Spec ...loaded. (3.12 >= 0.80)
> *** Module::AutoInstall configuration finished.
> Checking if your kit is complete...
> Looks good
> Writing Makefile for File::HomeDir
> /usr/bin/make OPTIMIZE="-O2 -g -Wall"
> make[1]: Entering directory `/build/buildd/libfile-homedir-perl-0.56'
> cp lib/File/HomeDir/Darwin.pm blib/lib/File/HomeDir/Darwin.pm
> cp lib/File/HomeDir.pm blib/lib/File/HomeDir.pm
> cp lib/File/HomeDir/Unix.pm blib/lib/File/HomeDir/Unix.pm
> cp lib/File/HomeDir/MacOS9.pm blib/lib/File/HomeDir/MacOS9.pm
> cp lib/File/HomeDir/Windows.pm blib/lib/File/HomeDir/Windows.pm
> Manifying blib/man3/File::HomeDir.3pm
> make[1]: Leaving directory `/build/buildd/libfile-homedir-perl-0.56'
> /usr/bin/make test
> make[1]: Entering directory `/build/buildd/libfile-homedir-perl-0.56'
> PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e"
> "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/01_compile.t t/02_main.t
> t/99_pod.t
> t/01_compile....ok
> t/02_main.......
> # Failed test 'Our home directory exists'
> # in t/02_main.t at line 25.
>
> # Failed test 'Our home directory exists'
> # in t/02_main.t at line 30.
>
> # Failed test 'Our home directory exists'
> # in t/02_main.t at line 33.
>
> # Failed test 'Our documents directory exists'
> # in t/02_main.t at line 38.
>
> # Failed test 'Our documents directory exists'
> # in t/02_main.t at line 41.
>
> # Failed test 'Our local data directory exists'
> # in t/02_main.t at line 46.
>
> # Failed test 'Our local data directory exists'
> # in t/02_main.t at line 49.
> # Looks like you failed 7 tests of 23.
> dubious
> Test returned status 7 (wstat 1792, 0x700)
> DIED. FAILED tests 2, 4, 6, 8, 10, 12, 14
> Failed 7/23 tests, 69.57% okay (less 4 skipped tests: 12 okay, 52.17%)
> t/99_pod........ok
> Failed Test Stat Wstat Total Fail Failed List of Failed
> -------------------------------------------------------------------------------
> t/02_main.t 7 1792 23 7 30.43% 2 4 6 8 10 12 14
> 4 subtests skipped.
> Failed 1/3 test scripts, 66.67% okay. 7/35 subtests failed, 80.00% okay.
> make[1]: *** [test_dynamic] Error 255
> make[1]: Leaving directory `/build/buildd/libfile-homedir-perl-0.56'
> make: *** [build-stamp] Error 2
> ******************************************************************************
> Build finished at 20061028-0018
> FAILED [dpkg-buildpackage died]
> Purging chroot-unstable/build/buildd/libfile-homedir-perl-0.56
> ------------------------------------------------------------------------------
> /usr/bin/sudo dpkg --root=/home/buildd/build/chroot-unstable --purge
> intltool-debian libpod-simple-perl libtest-pod-perl gettext file html2text
> gettext-base debhelper libio-stringy-perl po-debconf libmagic1
> libpod-escapes-perl
> (Reading database ... 10702 files and directories currently installed.)
> Removing libtest-pod-perl ...
> Removing debhelper ...
> Removing libio-stringy-perl ...
> Removing po-debconf ...
> Removing intltool-debian ...
> Removing libpod-simple-perl ...
> Removing gettext ...
> Removing file ...
> Purging configuration files for file ...
> Removing html2text ...
> Purging configuration files for html2text ...
> Removing gettext-base ...
> Removing libmagic1 ...
> Purging configuration files for libmagic1 ...
> Removing libpod-escapes-perl ...
> ******************************************************************************
> Finished at 20061028-0018
> Build needed 00:00:08, 340k disk space
--
Julien Danjou
.''`. Debian Developer
: :' : http://julien.danjou.info
`. `' http://people.debian.org/~acid
`- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD
signature.asc
Description: Digital signature
--- End Message ---
--- Begin Message ---
Source: libfile-homedir-perl
Source-Version: 0.64-1
We believe that the bug you reported is fixed in the latest version of
libfile-homedir-perl, which is due to be installed in the Debian FTP archive:
libfile-homedir-perl_0.64-1.diff.gz
to pool/main/libf/libfile-homedir-perl/libfile-homedir-perl_0.64-1.diff.gz
libfile-homedir-perl_0.64-1.dsc
to pool/main/libf/libfile-homedir-perl/libfile-homedir-perl_0.64-1.dsc
libfile-homedir-perl_0.64-1_all.deb
to pool/main/libf/libfile-homedir-perl/libfile-homedir-perl_0.64-1_all.deb
libfile-homedir-perl_0.64.orig.tar.gz
to pool/main/libf/libfile-homedir-perl/libfile-homedir-perl_0.64.orig.tar.gz
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Jonas Genannt <[EMAIL PROTECTED]> (supplier of updated libfile-homedir-perl
package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Fri, 9 Feb 2007 14:35:34 +0100
Source: libfile-homedir-perl
Binary: libfile-homedir-perl
Architecture: source all
Version: 0.64-1
Distribution: unstable
Urgency: low
Maintainer: Jonas Genannt <[EMAIL PROTECTED]>
Changed-By: Jonas Genannt <[EMAIL PROTECTED]>
Description:
libfile-homedir-perl - Get the home directory for yourself or other users in
Perl
Closes: 395858
Changes:
libfile-homedir-perl (0.64-1) unstable; urgency=low
.
* New Upstream Release
* bumped Standards-Version to 3.7.2 (no changes needed)
* removed make test from build (Closes: #395858)
Files:
0f83b0496c4ad8bba4e426a7fca1ed6a 675 perl optional
libfile-homedir-perl_0.64-1.dsc
6fc8be36a3f5e04c39530f150593e520 35370 perl optional
libfile-homedir-perl_0.64.orig.tar.gz
eadb8fd7c8ddc721b53664310abddd88 1829 perl optional
libfile-homedir-perl_0.64-1.diff.gz
ca8e6cc1fdc68c918821917419565108 27080 perl optional
libfile-homedir-perl_0.64-1_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFFzZSs+C5cwEsrK54RAmyPAJsFIs/LrBS7KnsbirXCnw/LICBy3QCgyPwu
vtElnajdApYhDfuViPyTGnU=
=cvIg
-----END PGP SIGNATURE-----
--- End Message ---
