Bug#1123160: marked as done (pint-xarray: FTBFS: dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.14 3.13" returned exit code 13)

Sun, 08 Feb 2026 13:27:26 -0800 

Your message dated Sun, 08 Feb 2026 21:24:11 +0000
with message-id <[email protected]>
and subject line Bug#1123160: fixed in pint-xarray 0.6.0-3
has caused the Debian Bug report #1123160,
regarding pint-xarray: FTBFS: dh_auto_test: error: pybuild --test --test-pytest 
-i python{version} -p "3.14 3.13" returned exit code 13
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
1123160: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1123160
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message --- 
Package: src:pint-xarray
Version: 0.6.0-2
Severity: serious
Tags: ftbfs forky sid

Dear maintainer:

During a rebuild of all packages in unstable, this package failed to build.

Below you will find the last part of the build log (probably the most
relevant part, but not necessarily). If required, the full build log
is available here:

https://people.debian.org/~sanvila/build-logs/202512/

About the archive rebuild: The build was made on virtual machines from AWS,
using sbuild and a reduced chroot with only build-essential packages.

If you cannot reproduce the bug please contact me privately, as I
am willing to provide ssh access to a virtual machine where the bug is
fully reproducible.

If this is really a bug in one of the build-depends, please use
reassign and add an affects on src:pint-xarray, so that this is still
visible in the BTS web page for this package.

Thanks.

--------------------------------------------------------------------------------
[...]
 debian/rules clean
dh clean --buildsystem=pybuild
   dh_auto_clean -O--buildsystem=pybuild
   dh_autoreconf_clean -O--buildsystem=pybuild
   dh_clean -O--buildsystem=pybuild
 debian/rules binary
dh binary --buildsystem=pybuild
   dh_update_autotools_config -O--buildsystem=pybuild
   dh_autoreconf -O--buildsystem=pybuild
   dh_auto_configure -O--buildsystem=pybuild
   dh_auto_build -O--buildsystem=pybuild
I: pybuild plugin_pyproject:131: Building wheel for python3.14 with "build" 
module
I: pybuild base:317: python3.14 -m build --skip-dependency-check --no-isolation 
--wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_pint_xarray  
* Building wheel...
running bdist_wheel
running build
running build_py
creating build/lib/pint_xarray
copying pint_xarray/accessors.py -> build/lib/pint_xarray
copying pint_xarray/conversion.py -> build/lib/pint_xarray
copying pint_xarray/index.py -> build/lib/pint_xarray
copying pint_xarray/testing.py -> build/lib/pint_xarray
copying pint_xarray/errors.py -> build/lib/pint_xarray
copying pint_xarray/formatting.py -> build/lib/pint_xarray
copying pint_xarray/_expects.py -> build/lib/pint_xarray
copying pint_xarray/compat.py -> build/lib/pint_xarray
copying pint_xarray/itertools.py -> build/lib/pint_xarray
copying pint_xarray/__init__.py -> build/lib/pint_xarray
creating build/lib/pint_xarray/tests
copying pint_xarray/tests/test_expects.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_formatting.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_accessors.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_conversion.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_itertools.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/utils.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_index.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/test_testing.py -> build/lib/pint_xarray/tests
copying pint_xarray/tests/__init__.py -> build/lib/pint_xarray/tests
running egg_info
creating pint_xarray.egg-info
writing pint_xarray.egg-info/PKG-INFO
writing dependency_links to pint_xarray.egg-info/dependency_links.txt
writing requirements to pint_xarray.egg-info/requires.txt
writing top-level names to pint_xarray.egg-info/top_level.txt
writing manifest file 'pint_xarray.egg-info/SOURCES.txt'
reading manifest file 'pint_xarray.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'pint_xarray.egg-info/SOURCES.txt'
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/pint_xarray
copying build/lib/pint_xarray/accessors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/conversion.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/index.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/testing.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/errors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/formatting.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
creating build/bdist.linux-x86_64/wheel/pint_xarray/tests
copying build/lib/pint_xarray/tests/test_expects.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_formatting.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_accessors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_conversion.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_itertools.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/utils.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_index.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_testing.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/__init__.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/_expects.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/compat.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/itertools.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/__init__.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
running install_egg_info
Copying pint_xarray.egg-info to 
build/bdist.linux-x86_64/wheel/./pint_xarray-0.6.0.egg-info
running install_scripts
creating build/bdist.linux-x86_64/wheel/pint_xarray-0.6.0.dist-info/WHEEL
creating 
'/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_pint_xarray/.tmp-ic30qsjy/pint_xarray-0.6.0-py3-none-any.whl'
 and adding 'build/bdist.linux-x86_64/wheel' to it
adding 'pint_xarray/__init__.py'
adding 'pint_xarray/_expects.py'
adding 'pint_xarray/accessors.py'
adding 'pint_xarray/compat.py'
adding 'pint_xarray/conversion.py'
adding 'pint_xarray/errors.py'
adding 'pint_xarray/formatting.py'
adding 'pint_xarray/index.py'
adding 'pint_xarray/itertools.py'
adding 'pint_xarray/testing.py'
adding 'pint_xarray/tests/__init__.py'
adding 'pint_xarray/tests/test_accessors.py'
adding 'pint_xarray/tests/test_conversion.py'
adding 'pint_xarray/tests/test_expects.py'
adding 'pint_xarray/tests/test_formatting.py'
adding 'pint_xarray/tests/test_index.py'
adding 'pint_xarray/tests/test_itertools.py'
adding 'pint_xarray/tests/test_testing.py'
adding 'pint_xarray/tests/utils.py'
adding 'pint_xarray-0.6.0.dist-info/licenses/LICENSE'
adding 'pint_xarray-0.6.0.dist-info/METADATA'
adding 'pint_xarray-0.6.0.dist-info/WHEEL'
adding 'pint_xarray-0.6.0.dist-info/top_level.txt'
adding 'pint_xarray-0.6.0.dist-info/RECORD'
removing build/bdist.linux-x86_64/wheel
Successfully built pint_xarray-0.6.0-py3-none-any.whl
I: pybuild plugin_pyproject:155: Unpacking wheel built for python3.14 with 
"installer" module
I: pybuild plugin_pyproject:131: Building wheel for python3.13 with "build" 
module
I: pybuild base:317: python3.13 -m build --skip-dependency-check --no-isolation 
--wheel --outdir /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_pint_xarray  
* Building wheel...
running bdist_wheel
running build
running build_py
running egg_info
writing pint_xarray.egg-info/PKG-INFO
writing dependency_links to pint_xarray.egg-info/dependency_links.txt
writing requirements to pint_xarray.egg-info/requires.txt
writing top-level names to pint_xarray.egg-info/top_level.txt
reading manifest file 'pint_xarray.egg-info/SOURCES.txt'
adding license file 'LICENSE'
writing manifest file 'pint_xarray.egg-info/SOURCES.txt'
installing to build/bdist.linux-x86_64/wheel
running install
running install_lib
creating build/bdist.linux-x86_64/wheel
creating build/bdist.linux-x86_64/wheel/pint_xarray
copying build/lib/pint_xarray/accessors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/conversion.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/index.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/testing.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/errors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/formatting.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
creating build/bdist.linux-x86_64/wheel/pint_xarray/tests
copying build/lib/pint_xarray/tests/test_expects.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_formatting.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_accessors.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_conversion.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_itertools.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/utils.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_index.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/test_testing.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/tests/__init__.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray/tests
copying build/lib/pint_xarray/_expects.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/compat.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/itertools.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
copying build/lib/pint_xarray/__init__.py -> 
build/bdist.linux-x86_64/wheel/./pint_xarray
running install_egg_info
Copying pint_xarray.egg-info to 
build/bdist.linux-x86_64/wheel/./pint_xarray-0.6.0.egg-info
running install_scripts
creating build/bdist.linux-x86_64/wheel/pint_xarray-0.6.0.dist-info/WHEEL
creating 
'/<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_pint_xarray/.tmp-ecoexqj3/pint_xarray-0.6.0-py3-none-any.whl'
 and adding 'build/bdist.linux-x86_64/wheel' to it
adding 'pint_xarray/__init__.py'
adding 'pint_xarray/_expects.py'
adding 'pint_xarray/accessors.py'
adding 'pint_xarray/compat.py'
adding 'pint_xarray/conversion.py'
adding 'pint_xarray/errors.py'
adding 'pint_xarray/formatting.py'
adding 'pint_xarray/index.py'
adding 'pint_xarray/itertools.py'
adding 'pint_xarray/testing.py'
adding 'pint_xarray/tests/__init__.py'
adding 'pint_xarray/tests/test_accessors.py'
adding 'pint_xarray/tests/test_conversion.py'
adding 'pint_xarray/tests/test_expects.py'
adding 'pint_xarray/tests/test_formatting.py'
adding 'pint_xarray/tests/test_index.py'
adding 'pint_xarray/tests/test_itertools.py'
adding 'pint_xarray/tests/test_testing.py'
adding 'pint_xarray/tests/utils.py'
adding 'pint_xarray-0.6.0.dist-info/licenses/LICENSE'
adding 'pint_xarray-0.6.0.dist-info/METADATA'
adding 'pint_xarray-0.6.0.dist-info/WHEEL'
adding 'pint_xarray-0.6.0.dist-info/top_level.txt'
adding 'pint_xarray-0.6.0.dist-info/RECORD'
removing build/bdist.linux-x86_64/wheel
Successfully built pint_xarray-0.6.0-py3-none-any.whl
I: pybuild plugin_pyproject:155: Unpacking wheel built for python3.13 with 
"installer" module
   dh_auto_test -O--buildsystem=pybuild
I: pybuild base:317: cd 
/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_pint_xarray/build; python3.14 -m pytest 
--pyargs pint_xarray
============================= test session starts ==============================
platform linux -- Python 3.14.2, pytest-9.0.2, pluggy-1.6.0
rootdir: /<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_pint_xarray/build
configfile: pyproject.toml
plugins: typeguard-4.4.4
collected 342 items

pint_xarray/tests/test_accessors.py .................................... [ 10%]
........................................................................ [ 31%]
................................                                         [ 40%]
pint_xarray/tests/test_conversion.py ................................... [ 51%]
........................................................................ [ 72%]
.....                                                                    [ 73%]
pint_xarray/tests/test_expects.py ..F.........F...............           [ 81%]
pint_xarray/tests/test_formatting.py .....                               [ 83%]
pint_xarray/tests/test_index.py ........................................ [ 95%]
..                                                                       [ 95%]
pint_xarray/tests/test_itertools.py .........                            [ 98%]
pint_xarray/tests/test_testing.py ......                                 [100%]

=================================== FAILURES ===================================
_______________ TestExpects.test_args[values2-units2-expected2] ________________

self = <pint_xarray.tests.test_expects.TestExpects object at 0x7f020e77e060>
values = (<xarray.DataArray ()> Size: 8B
<Quantity(4, 'kilometer')>, 2)
units = ('m', None, None), expected = <xarray.DataArray ()> Size: 8B
array(2000)

    @pytest.mark.parametrize(
        ["values", "units", "expected"],
        (
            ((ureg.Quantity(1, "m"), 2), ("mm", None, None), 500),
            ((ureg.Quantity(1, "m"), ureg.Quantity(0.5, "s")), ("mm", "ms", 
None), 2),
            (
                (xr.DataArray(4).pint.quantify("km"), 2),
                ("m", None, None),
                xr.DataArray(2000),
            ),
            (
                (
                    xr.DataArray([4, 2, 0]).pint.quantify("cm"),
                    xr.DataArray([4, 2, 1]).pint.quantify("mg"),
                ),
                ("m", "g", None),
                xr.DataArray([10, 10, 0]),
            ),
            (
                (ureg.Quantity(16, "m"), 2, ureg.Quantity(4, "s")),
                ("mm", None, "ms"),
                2,
            ),
        ),
    )
    def test_args(self, values, units, expected):
        @pint_xarray.expects(*units)
        def func(a, b, c=1):
            return a / (b * c)
    
        actual = func(*values)
    
        if isinstance(actual, xr.DataArray):
>           xr.testing.assert_identical(actual, expected)
E           AssertionError: Left and right DataArray objects are not identical
E           Attributes only on the left object:
E               units: meter

pint_xarray/tests/test_expects.py:47: AssertionError
______________ TestExpects.test_kwargs[values3-units3-expected3] _______________

self = <pint_xarray.tests.test_expects.TestExpects object at 0x7f020e762f90>
values = {'a': <xarray.DataArray ()> Size: 8B
<Quantity(4, 'kilometer')>, 'b': 2}
units = {'a': 'm', 'b': None, 'c': None}
expected = <xarray.DataArray ()> Size: 8B
array(4000)

    @pytest.mark.parametrize(
        ["values", "units", "expected"],
        (
            (
                {"a": ureg.Quantity(1, "m"), "b": 2},
                {"a": "mm", "b": None, "c": None},
                1000,
            ),
            (
                {"a": 2, "b": ureg.Quantity(100, "cm")},
                {"a": None, "b": "m", "c": None},
                4,
            ),
            (
                {"a": ureg.Quantity(1, "m"), "b": ureg.Quantity(0.5, "s")},
                {"a": "mm", "b": "ms", "c": None},
                4,
            ),
            (
                {"a": xr.DataArray(4).pint.quantify("km"), "b": 2},
                {"a": "m", "b": None, "c": None},
                xr.DataArray(4000),
            ),
            (
                {
                    "a": xr.DataArray([4, 2, 0]).pint.quantify("cm"),
                    "b": xr.DataArray([4, 2, 1]).pint.quantify("mg"),
                },
                {"a": "m", "b": "g", "c": None},
                xr.DataArray([20, 20, 0]),
            ),
        ),
    )
    def test_kwargs(self, values, units, expected):
        @pint_xarray.expects(**units)
        def func(a, b, c=2):
            return a / b * c
    
        actual = func(**values)
    
        if isinstance(actual, xr.DataArray):
>           xr.testing.assert_identical(actual, expected)
E           AssertionError: Left and right DataArray objects are not identical
E           Attributes only on the left object:
E               units: meter

pint_xarray/tests/test_expects.py:149: AssertionError
=========================== short test summary info ============================
FAILED 
pint_xarray/tests/test_expects.py::TestExpects::test_args[values2-units2-expected2]
FAILED 
pint_xarray/tests/test_expects.py::TestExpects::test_kwargs[values3-units3-expected3]
======================== 2 failed, 340 passed in 1.67s =========================
E: pybuild pybuild:389: test: plugin pyproject failed with: exit code=1: cd 
/<<PKGBUILDDIR>>/.pybuild/cpython3_3.14_pint_xarray/build; python3.14 -m pytest 
--pyargs pint_xarray
I: pybuild base:317: cd 
/<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_pint_xarray/build; python3.13 -m pytest 
--pyargs pint_xarray
============================= test session starts ==============================
platform linux -- Python 3.13.11, pytest-9.0.2, pluggy-1.6.0
rootdir: /<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_pint_xarray/build
configfile: pyproject.toml
plugins: typeguard-4.4.4
collected 342 items

pint_xarray/tests/test_accessors.py .................................... [ 10%]
........................................................................ [ 31%]
................................                                         [ 40%]
pint_xarray/tests/test_conversion.py ................................... [ 51%]
........................................................................ [ 72%]
.....                                                                    [ 73%]
pint_xarray/tests/test_expects.py ..F.........F...............           [ 81%]
pint_xarray/tests/test_formatting.py .....                               [ 83%]
pint_xarray/tests/test_index.py ........................................ [ 95%]
..                                                                       [ 95%]
pint_xarray/tests/test_itertools.py .........                            [ 98%]
pint_xarray/tests/test_testing.py ......                                 [100%]

=================================== FAILURES ===================================
_______________ TestExpects.test_args[values2-units2-expected2] ________________

self = <pint_xarray.tests.test_expects.TestExpects object at 0x7fde57d02fd0>
values = (<xarray.DataArray ()> Size: 8B
<Quantity(4, 'kilometer')>, 2)
units = ('m', None, None), expected = <xarray.DataArray ()> Size: 8B
array(2000)

    @pytest.mark.parametrize(
        ["values", "units", "expected"],
        (
            ((ureg.Quantity(1, "m"), 2), ("mm", None, None), 500),
            ((ureg.Quantity(1, "m"), ureg.Quantity(0.5, "s")), ("mm", "ms", 
None), 2),
            (
                (xr.DataArray(4).pint.quantify("km"), 2),
                ("m", None, None),
                xr.DataArray(2000),
            ),
            (
                (
                    xr.DataArray([4, 2, 0]).pint.quantify("cm"),
                    xr.DataArray([4, 2, 1]).pint.quantify("mg"),
                ),
                ("m", "g", None),
                xr.DataArray([10, 10, 0]),
            ),
            (
                (ureg.Quantity(16, "m"), 2, ureg.Quantity(4, "s")),
                ("mm", None, "ms"),
                2,
            ),
        ),
    )
    def test_args(self, values, units, expected):
        @pint_xarray.expects(*units)
        def func(a, b, c=1):
            return a / (b * c)
    
        actual = func(*values)
    
        if isinstance(actual, xr.DataArray):
>           xr.testing.assert_identical(actual, expected)
E           AssertionError: Left and right DataArray objects are not identical
E           Attributes only on the left object:
E               units: meter

pint_xarray/tests/test_expects.py:47: AssertionError
______________ TestExpects.test_kwargs[values3-units3-expected3] _______________

self = <pint_xarray.tests.test_expects.TestExpects object at 0x7fde57868f30>
values = {'a': <xarray.DataArray ()> Size: 8B
<Quantity(4, 'kilometer')>, 'b': 2}
units = {'a': 'm', 'b': None, 'c': None}
expected = <xarray.DataArray ()> Size: 8B
array(4000)

    @pytest.mark.parametrize(
        ["values", "units", "expected"],
        (
            (
                {"a": ureg.Quantity(1, "m"), "b": 2},
                {"a": "mm", "b": None, "c": None},
                1000,
            ),
            (
                {"a": 2, "b": ureg.Quantity(100, "cm")},
                {"a": None, "b": "m", "c": None},
                4,
            ),
            (
                {"a": ureg.Quantity(1, "m"), "b": ureg.Quantity(0.5, "s")},
                {"a": "mm", "b": "ms", "c": None},
                4,
            ),
            (
                {"a": xr.DataArray(4).pint.quantify("km"), "b": 2},
                {"a": "m", "b": None, "c": None},
                xr.DataArray(4000),
            ),
            (
                {
                    "a": xr.DataArray([4, 2, 0]).pint.quantify("cm"),
                    "b": xr.DataArray([4, 2, 1]).pint.quantify("mg"),
                },
                {"a": "m", "b": "g", "c": None},
                xr.DataArray([20, 20, 0]),
            ),
        ),
    )
    def test_kwargs(self, values, units, expected):
        @pint_xarray.expects(**units)
        def func(a, b, c=2):
            return a / b * c
    
        actual = func(**values)
    
        if isinstance(actual, xr.DataArray):
>           xr.testing.assert_identical(actual, expected)
E           AssertionError: Left and right DataArray objects are not identical
E           Attributes only on the left object:
E               units: meter

pint_xarray/tests/test_expects.py:149: AssertionError
=========================== short test summary info ============================
FAILED 
pint_xarray/tests/test_expects.py::TestExpects::test_args[values2-units2-expected2]
FAILED 
pint_xarray/tests/test_expects.py::TestExpects::test_kwargs[values3-units3-expected3]
======================== 2 failed, 340 passed in 1.71s =========================
E: pybuild pybuild:389: test: plugin pyproject failed with: exit code=1: cd 
/<<PKGBUILDDIR>>/.pybuild/cpython3_3.13_pint_xarray/build; python3.13 -m pytest 
--pyargs pint_xarray
dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.14 
3.13" returned exit code 13
make: *** [debian/rules:9: binary] Error 25
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
--------------------------------------------------------------------------------

--- End Message ---
--- Begin Message --- 
Source: pint-xarray
Source-Version: 0.6.0-3
Done: Antonio Valentino <[email protected]>

We believe that the bug you reported is fixed in the latest version of
pint-xarray, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Antonio Valentino <[email protected]> (supplier of updated 
pint-xarray package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Sun, 08 Feb 2026 20:16:59 +0000
Source: pint-xarray
Architecture: source
Version: 0.6.0-3
Distribution: unstable
Urgency: medium
Maintainer: Debian GIS Project <[email protected]>
Changed-By: Antonio Valentino <[email protected]>
Closes: 1123160
Changes:
 pint-xarray (0.6.0-3) unstable; urgency=medium
 .
   [ Bas Couwenberg ]
   * Update lintian overrides.
   * Drop Rules-Requires-Root: no, default since dpkg 1.22.13.
   * Use test-build-validate-cleanup instead of test-build-twice.
   * Drop Priority: optional, default since dpkg 1.22.13.
   * Bump Standards-Version to 4.7.3, changes: priority.
 .
   [ Antonio Valentino ]
   * debian/patches:
     - New 0001-Strip-instead-of-dequalifying.patch and
       0002-Ensure-index-units-are-attached-and-converted-correc.patch.
       Closes: #1123160.
     - Update dates in d/copyright.
Checksums-Sha1:
 92ff48a569f4a4f26947009882237bccfcd5d5dc 2622 pint-xarray_0.6.0-3.dsc
 babdd5ac410fb61be208e2f0f0edd4bd9560cd1d 4300 pint-xarray_0.6.0-3.debian.tar.xz
 5eaef41464cf66e16476e73bf967679618ca7f5c 8263 
pint-xarray_0.6.0-3_amd64.buildinfo
Checksums-Sha256:
 d20201843302d079e59e928d1b71d5ae5c04c9f34ba630ed370c78a7ae6aec81 2622 
pint-xarray_0.6.0-3.dsc
 40d8be962bfec6a1e1ce6d593f665c5b907b13e3d4d6dc432d20bd8e24f3e242 4300 
pint-xarray_0.6.0-3.debian.tar.xz
 6ff1f0a768b62778a08dba8132d574be6bb3e273862ff6e10edcb63c8cc7d796 8263 
pint-xarray_0.6.0-3_amd64.buildinfo
Files:
 c4c25f257df53cd97bd2fca47bd038bf 2622 python optional pint-xarray_0.6.0-3.dsc
 b47929604aa984852f0a15eb5f2eaa49 4300 python optional 
pint-xarray_0.6.0-3.debian.tar.xz
 deccbf0102c4e3ae9f86d788e69b5406 8263 python optional 
pint-xarray_0.6.0-3_amd64.buildinfo

-----BEGIN PGP SIGNATURE-----

iQJRBAEBCgA7FiEEO3DyCaX/1okDxHLF6/SKslePmBIFAmmI88gdHGFudG9uaW8u
dmFsZW50aW5vQHRpc2NhbGkuaXQACgkQ6/SKslePmBITOhAAs1U+sAbeYx3otY85
WYes3BVgqFlH1FdflUNNEp5nJTNwS11e0g1zWT+PdFvBJZ9i/tahHOp68w2E9ov+
ZYMh5eZmz5/4HDsH4A71t7fXiDPtUdA+tdNEzaE8IB/FXM9nVM/jViAujcQRds99
ciSGsF2QxH089eJGPwb4iSCz55BMpVi3hXTBU0z9V/Kum7fPeUR/VPG28IvZ9Bnf
cGwaY13iCzcqwHr02nULSU39lCisd3LyvogBoxGH0/zD/N/80EqHZA5S+bSzeFUV
iTYm45lSg4o83K5RhsEEKjA6j6p9udjtckbKqWGpAFDY1JqcW4zB4whNecOklh3n
FiHcA3ivMJCcGlWUhSQ7KF+Gwi5pMiV4QZPu++qZ0/jvg/leFKsAP2E3K41RDGyP
RrPZqzRrvql8tVoQGblug/0BciSN+sHlnRjhnLKRJmYXIPpGtoWKHJUXik/f2w1V
7NoWzcJSwlkEqoSxMQf0xT6IvAQRiz8vEUUx9Z9mfLAkCApJCCnG2F78DomfLvI/
M2lLJyONeTtZih+5Xfetf9woQVfBX/uzXpgcp0e3R+hc8FFJg1wpqzzM9Dvf1Wej
sAl4aXXDR+z74bWCUihe6OnIybZPI0H+1jkRH0JXwXe6IOIB7jmsgr8QPh8fmuty
1o7y+RMDKt2ezlXiXvP7n3+r6CY=
=ZDht
-----END PGP SIGNATURE-----

Attachment: pgpiURL0I3Hj6.pgp
Description: PGP signature


--- End Message ---

Reply via email to