Hi, Just doing a simplistic test in schroot, I don't see the same problem with just python3-pkg-resources. Standard sbuild environment, installed just python3-pkg-resources, changed apt source & update, upgrade without errors. (Was also able to then do dist-upgrade). Same version of python3-pkg-resources as this bug.
However, adding python3-joblib to the chroot immediately provoked the
bug in a clean repeat of the check.
I'm attaching the full log of the run with python3-joblib showing the
bug.
If, after the bug shows up, I purge python3-joblib with dpkg -P, apt
upgrade completes normally.
After the removal:
apt-cache policy python3-joblib
python3-joblib:
Installed: (none)
Candidate: 0.17.0-2
Version table:
0.17.0-2 500
500 http://deb.debian.org/debian bullseye/main amd64 Packages
So it's the same version of python3-joblib as in the bug report.
Should this bug be reassigned to python3-joblib?
--
Neil Williams
=============
http://www.linux.codehelp.co.uk/
(buster-amd64-sbuild)root@sylvester:/home# apt install python3-joblib python3-pkg-resources Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: file libblas3 libexpat1 libgfortran5 libgpm2 liblapack3 libmagic-mgc libmagic1 libmpdec2 libncurses6 libprocps7 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib libreadline7 libsqlite3-0 libssl1.1 lsb-base mime-support procps psmisc python3 python3-atomicwrites python3-attr python3-minimal python3-more-itertools python3-numpy python3-pluggy python3-psutil python3-py python3-pytest python3-simplejson python3-six python3.7 python3.7-minimal readline-common Suggested packages: gpm python3-doc python3-tk python3-venv python-attr-doc gfortran python-numpy-doc python3-dev python3-numpy-dbg python3-setuptools python-psutil-doc subversion python3.7-venv python3.7-doc binfmt-support readline-doc The following NEW packages will be installed: file libblas3 libexpat1 libgfortran5 libgpm2 liblapack3 libmagic-mgc libmagic1 libmpdec2 libncurses6 libprocps7 libpython3-stdlib libpython3.7-minimal libpython3.7-stdlib libreadline7 libsqlite3-0 libssl1.1 lsb-base mime-support procps psmisc python3 python3-atomicwrites python3-attr python3-joblib python3-minimal python3-more-itertools python3-numpy python3-pkg-resources python3-pluggy python3-psutil python3-py python3-pytest python3-simplejson python3-six python3.7 python3.7-minimal readline-common 0 upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 14.2 MB of archives. After this operation, 63.9 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://deb.debian.org/debian buster/main amd64 libssl1.1 amd64 1.1.1d-0+deb10u5 [1539 kB] Get:2 http://deb.debian.org/debian buster/main amd64 libpython3.7-minimal amd64 3.7.3-2+deb10u3 [589 kB] Get:3 http://deb.debian.org/debian buster/main amd64 libexpat1 amd64 2.2.6-2+deb10u1 [106 kB] Get:4 http://deb.debian.org/debian buster/main amd64 python3.7-minimal amd64 3.7.3-2+deb10u3 [1737 kB] Get:5 http://deb.debian.org/debian buster/main amd64 python3-minimal amd64 3.7.3-1 [36.6 kB] Get:6 http://deb.debian.org/debian buster/main amd64 mime-support all 3.62 [37.2 kB] Get:7 http://deb.debian.org/debian buster/main amd64 libmpdec2 amd64 2.4.2-2 [87.2 kB] Get:8 http://deb.debian.org/debian buster/main amd64 readline-common all 7.0-5 [70.6 kB] Get:9 http://deb.debian.org/debian buster/main amd64 libreadline7 amd64 7.0-5 [151 kB] Get:10 http://deb.debian.org/debian buster/main amd64 libsqlite3-0 amd64 3.27.2-3+deb10u1 [641 kB] Get:11 http://deb.debian.org/debian buster/main amd64 libpython3.7-stdlib amd64 3.7.3-2+deb10u3 [1734 kB] Get:12 http://deb.debian.org/debian buster/main amd64 python3.7 amd64 3.7.3-2+deb10u3 [330 kB] Get:13 http://deb.debian.org/debian buster/main amd64 libpython3-stdlib amd64 3.7.3-1 [20.0 kB] Get:14 http://deb.debian.org/debian buster/main amd64 python3 amd64 3.7.3-1 [61.5 kB] Get:15 http://deb.debian.org/debian buster/main amd64 libncurses6 amd64 6.1+20181013-2+deb10u2 [102 kB] Get:16 http://deb.debian.org/debian buster/main amd64 libprocps7 amd64 2:3.3.15-2 [61.7 kB] Get:17 http://deb.debian.org/debian buster/main amd64 lsb-base all 10.2019051400 [28.4 kB] Get:18 http://deb.debian.org/debian buster/main amd64 procps amd64 2:3.3.15-2 [259 kB] Get:19 http://deb.debian.org/debian buster/main amd64 libmagic-mgc amd64 1:5.35-4+deb10u2 [242 kB] Get:20 http://deb.debian.org/debian buster/main amd64 libmagic1 amd64 1:5.35-4+deb10u2 [118 kB] Get:21 http://deb.debian.org/debian buster/main amd64 file amd64 1:5.35-4+deb10u2 [66.4 kB] Get:22 http://deb.debian.org/debian buster/main amd64 libgfortran5 amd64 8.3.0-6 [581 kB] Get:23 http://deb.debian.org/debian buster/main amd64 libblas3 amd64 3.8.0-2 [148 kB] Get:24 http://deb.debian.org/debian buster/main amd64 libgpm2 amd64 1.20.7-5 [35.1 kB] Get:25 http://deb.debian.org/debian buster/main amd64 liblapack3 amd64 3.8.0-2 [2110 kB] Get:26 http://deb.debian.org/debian buster/main amd64 psmisc amd64 23.2-1 [126 kB] Get:27 http://deb.debian.org/debian buster/main amd64 python3-atomicwrites all 1.1.5-2 [6892 B] Get:28 http://deb.debian.org/debian buster/main amd64 python3-attr all 18.2.0-1 [37.3 kB] Get:29 http://deb.debian.org/debian buster/main amd64 python3-joblib all 0.13.0-2 [187 kB] Get:30 http://deb.debian.org/debian buster/main amd64 python3-six all 1.12.0-1 [15.7 kB] Get:31 http://deb.debian.org/debian buster/main amd64 python3-more-itertools all 4.2.0-1 [42.2 kB] Get:32 http://deb.debian.org/debian buster/main amd64 python3-pkg-resources all 40.8.0-1 [153 kB] Get:33 http://deb.debian.org/debian buster/main amd64 python3-numpy amd64 1:1.16.2-1 [2119 kB] Get:34 http://deb.debian.org/debian buster/main amd64 python3-pluggy all 0.8.0-1 [20.6 kB] Get:35 http://deb.debian.org/debian buster/main amd64 python3-psutil amd64 5.5.1-1 [166 kB] Get:36 http://deb.debian.org/debian buster/main amd64 python3-py all 1.7.0-2 [86.6 kB] Get:37 http://deb.debian.org/debian buster/main amd64 python3-pytest all 3.10.1-2 [243 kB] Get:38 http://deb.debian.org/debian buster/main amd64 python3-simplejson amd64 3.16.0-1 [60.7 kB] Fetched 14.2 MB in 2s (5792 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package libssl1.1:amd64. (Reading database ... 11941 files and directories currently installed.) Preparing to unpack .../libssl1.1_1.1.1d-0+deb10u5_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.1d-0+deb10u5) ... Selecting previously unselected package libpython3.7-minimal:amd64. Preparing to unpack .../libpython3.7-minimal_3.7.3-2+deb10u3_amd64.deb ... Unpacking libpython3.7-minimal:amd64 (3.7.3-2+deb10u3) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../libexpat1_2.2.6-2+deb10u1_amd64.deb ... Unpacking libexpat1:amd64 (2.2.6-2+deb10u1) ... Selecting previously unselected package python3.7-minimal. Preparing to unpack .../python3.7-minimal_3.7.3-2+deb10u3_amd64.deb ... Unpacking python3.7-minimal (3.7.3-2+deb10u3) ... Setting up libssl1.1:amd64 (1.1.1d-0+deb10u5) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Setting up libpython3.7-minimal:amd64 (3.7.3-2+deb10u3) ... Setting up libexpat1:amd64 (2.2.6-2+deb10u1) ... Setting up python3.7-minimal (3.7.3-2+deb10u3) ... Selecting previously unselected package python3-minimal. (Reading database ... 12202 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.7.3-1_amd64.deb ... Unpacking python3-minimal (3.7.3-1) ... Selecting previously unselected package mime-support. Preparing to unpack .../1-mime-support_3.62_all.deb ... Unpacking mime-support (3.62) ... Selecting previously unselected package libmpdec2:amd64. Preparing to unpack .../2-libmpdec2_2.4.2-2_amd64.deb ... Unpacking libmpdec2:amd64 (2.4.2-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_7.0-5_all.deb ... Unpacking readline-common (7.0-5) ... Selecting previously unselected package libreadline7:amd64. Preparing to unpack .../4-libreadline7_7.0-5_amd64.deb ... Unpacking libreadline7:amd64 (7.0-5) ... Selecting previously unselected package libsqlite3-0:amd64. Preparing to unpack .../5-libsqlite3-0_3.27.2-3+deb10u1_amd64.deb ... Unpacking libsqlite3-0:amd64 (3.27.2-3+deb10u1) ... Selecting previously unselected package libpython3.7-stdlib:amd64. Preparing to unpack .../6-libpython3.7-stdlib_3.7.3-2+deb10u3_amd64.deb ... Unpacking libpython3.7-stdlib:amd64 (3.7.3-2+deb10u3) ... Selecting previously unselected package python3.7. Preparing to unpack .../7-python3.7_3.7.3-2+deb10u3_amd64.deb ... Unpacking python3.7 (3.7.3-2+deb10u3) ... Selecting previously unselected package libpython3-stdlib:amd64. Preparing to unpack .../8-libpython3-stdlib_3.7.3-1_amd64.deb ... Unpacking libpython3-stdlib:amd64 (3.7.3-1) ... Setting up python3-minimal (3.7.3-1) ... Selecting previously unselected package python3. (Reading database ... 12671 files and directories currently installed.) Preparing to unpack .../00-python3_3.7.3-1_amd64.deb ... Unpacking python3 (3.7.3-1) ... Selecting previously unselected package libncurses6:amd64. Preparing to unpack .../01-libncurses6_6.1+20181013-2+deb10u2_amd64.deb ... Unpacking libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Selecting previously unselected package libprocps7:amd64. Preparing to unpack .../02-libprocps7_2%3a3.3.15-2_amd64.deb ... Unpacking libprocps7:amd64 (2:3.3.15-2) ... Selecting previously unselected package lsb-base. Preparing to unpack .../03-lsb-base_10.2019051400_all.deb ... Unpacking lsb-base (10.2019051400) ... Selecting previously unselected package procps. Preparing to unpack .../04-procps_2%3a3.3.15-2_amd64.deb ... Unpacking procps (2:3.3.15-2) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../05-libmagic-mgc_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic-mgc (1:5.35-4+deb10u2) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../06-libmagic1_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking libmagic1:amd64 (1:5.35-4+deb10u2) ... Selecting previously unselected package file. Preparing to unpack .../07-file_1%3a5.35-4+deb10u2_amd64.deb ... Unpacking file (1:5.35-4+deb10u2) ... Selecting previously unselected package libgfortran5:amd64. Preparing to unpack .../08-libgfortran5_8.3.0-6_amd64.deb ... Unpacking libgfortran5:amd64 (8.3.0-6) ... Selecting previously unselected package libblas3:amd64. Preparing to unpack .../09-libblas3_3.8.0-2_amd64.deb ... Unpacking libblas3:amd64 (3.8.0-2) ... Selecting previously unselected package libgpm2:amd64. Preparing to unpack .../10-libgpm2_1.20.7-5_amd64.deb ... Unpacking libgpm2:amd64 (1.20.7-5) ... Selecting previously unselected package liblapack3:amd64. Preparing to unpack .../11-liblapack3_3.8.0-2_amd64.deb ... Unpacking liblapack3:amd64 (3.8.0-2) ... Selecting previously unselected package psmisc. Preparing to unpack .../12-psmisc_23.2-1_amd64.deb ... Unpacking psmisc (23.2-1) ... Selecting previously unselected package python3-atomicwrites. Preparing to unpack .../13-python3-atomicwrites_1.1.5-2_all.deb ... Unpacking python3-atomicwrites (1.1.5-2) ... Selecting previously unselected package python3-attr. Preparing to unpack .../14-python3-attr_18.2.0-1_all.deb ... Unpacking python3-attr (18.2.0-1) ... Selecting previously unselected package python3-joblib. Preparing to unpack .../15-python3-joblib_0.13.0-2_all.deb ... Unpacking python3-joblib (0.13.0-2) ... Selecting previously unselected package python3-six. Preparing to unpack .../16-python3-six_1.12.0-1_all.deb ... Unpacking python3-six (1.12.0-1) ... Selecting previously unselected package python3-more-itertools. Preparing to unpack .../17-python3-more-itertools_4.2.0-1_all.deb ... Unpacking python3-more-itertools (4.2.0-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../18-python3-pkg-resources_40.8.0-1_all.deb ... Unpacking python3-pkg-resources (40.8.0-1) ... Selecting previously unselected package python3-numpy. Preparing to unpack .../19-python3-numpy_1%3a1.16.2-1_amd64.deb ... Unpacking python3-numpy (1:1.16.2-1) ... Selecting previously unselected package python3-pluggy. Preparing to unpack .../20-python3-pluggy_0.8.0-1_all.deb ... Unpacking python3-pluggy (0.8.0-1) ... Selecting previously unselected package python3-psutil. Preparing to unpack .../21-python3-psutil_5.5.1-1_amd64.deb ... Unpacking python3-psutil (5.5.1-1) ... Selecting previously unselected package python3-py. Preparing to unpack .../22-python3-py_1.7.0-2_all.deb ... Unpacking python3-py (1.7.0-2) ... Selecting previously unselected package python3-pytest. Preparing to unpack .../23-python3-pytest_3.10.1-2_all.deb ... Unpacking python3-pytest (3.10.1-2) ... Selecting previously unselected package python3-simplejson. Preparing to unpack .../24-python3-simplejson_3.16.0-1_amd64.deb ... Unpacking python3-simplejson (3.16.0-1) ... Setting up lsb-base (10.2019051400) ... Setting up libgpm2:amd64 (1.20.7-5) ... Setting up mime-support (3.62) ... Setting up libmagic-mgc (1:5.35-4+deb10u2) ... Setting up psmisc (23.2-1) ... Setting up libprocps7:amd64 (2:3.3.15-2) ... Setting up libsqlite3-0:amd64 (3.27.2-3+deb10u1) ... Setting up libmagic1:amd64 (1:5.35-4+deb10u2) ... Setting up file (1:5.35-4+deb10u2) ... Setting up libncurses6:amd64 (6.1+20181013-2+deb10u2) ... Setting up libgfortran5:amd64 (8.3.0-6) ... Setting up procps (2:3.3.15-2) ... update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode Setting up libmpdec2:amd64 (2.4.2-2) ... Setting up readline-common (7.0-5) ... Setting up libreadline7:amd64 (7.0-5) ... Setting up libpython3.7-stdlib:amd64 (3.7.3-2+deb10u3) ... Setting up libblas3:amd64 (3.8.0-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/x86_64-linux-gnu/libblas.so.3 (libblas.so.3-x86_64-linux-gnu) in auto mode Setting up libpython3-stdlib:amd64 (3.7.3-1) ... Setting up python3.7 (3.7.3-2+deb10u3) ... Setting up liblapack3:amd64 (3.8.0-2) ... update-alternatives: using /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3 to provide /usr/lib/x86_64-linux-gnu/liblapack.so.3 (liblapack.so.3-x86_64-linux-gnu) in auto mode Setting up python3 (3.7.3-1) ... running python rtupdate hooks for python3.7... running python post-rtupdate hooks for python3.7... Setting up python3-psutil (5.5.1-1) ... Setting up python3-atomicwrites (1.1.5-2) ... Setting up python3-six (1.12.0-1) ... Setting up python3-simplejson (3.16.0-1) ... Setting up python3-pluggy (0.8.0-1) ... Setting up python3-pkg-resources (40.8.0-1) ... Setting up python3-more-itertools (4.2.0-1) ... Setting up python3-attr (18.2.0-1) ... Setting up python3-py (1.7.0-2) ... Setting up python3-joblib (0.13.0-2) ... Setting up python3-pytest (3.10.1-2) ... Setting up python3-numpy (1:1.16.2-1) ... Processing triggers for libc-bin (2.28-10) ... (buster-amd64-sbuild)root@sylvester:/home# cat /etc/apt/sources.list deb http://deb.debian.org/debian buster main deb-src http://deb.debian.org/debian buster main (buster-amd64-sbuild)root@sylvester:/home# echo "deb http://deb.debian.org/debian bullseye main" > /etc/apt/sources.list (buster-amd64-sbuild)root@sylvester:/home# apt update Hit:1 http://mirror.bytemark.co.uk/debian buster-backports InRelease Get:2 http://deb.debian.org/debian bullseye InRelease [142 kB] Get:3 http://mirror.bytemark.co.uk/debian buster-backports/main Translation-en [388 kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 Packages [8202 kB] Get:5 http://deb.debian.org/debian bullseye/main Translation-en [6261 kB] Fetched 15.0 MB in 5s (3076 kB/s) Reading package lists... Done Building dependency tree Reading state information... Done 140 packages can be upgraded. Run 'apt list --upgradable' to see them. (buster-amd64-sbuild)root@sylvester:/home# apt upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages were automatically installed and are no longer required: libprocps7 python3-atomicwrites Use 'apt autoremove' to remove them. The following NEW packages will be installed: bsdextrautils ca-certificates gcc-10-base gcc-9-base libapt-pkg6.0 libctf-nobfd0 libctf0 libffi7 libgcc-s1 libhogweed6 libnettle8 libpcre2-8-0 libprocps8 libxxhash0 logsave mailcap manpages manpages-dev media-types openssl python3-importlib-metadata python3-iniconfig python3-packaging python3-pygments python3-pyparsing python3-toml python3-zipp sensible-utils The following packages have been kept back: build-essential cpp g++ gcc libc-bin libc-dev-bin libc6 libc6-dev libgfortran5 liblapack3 libpam-modules libpam-modules-bin libpython3-stdlib libsqlite3-0 libsystemd0 libudev1 login mawk passwd perl perl-base python3 python3-minimal python3-numpy python3-psutil python3-simplejson util-linux The following packages will be upgraded: apt base-files base-passwd bash binutils binutils-common binutils-x86-64-linux-gnu bsdutils bzip2 coreutils dash debconf debian-archive-keyring debianutils diffutils dpkg dpkg-dev e2fsprogs fakeroot fdisk file findutils gpgv grep gzip hostname init-system-helpers libacl1 libasan5 libatomic1 libattr1 libaudit-common libaudit1 libbinutils libblas3 libblkid1 libbz2-1.0 libcap-ng0 libcc1-0 libcom-err2 libdb5.3 libdebconfclient0 libdpkg-perl libexpat1 libext2fs2 libfakeroot libfdisk1 libgcrypt20 libgdbm-compat4 libgdbm6 libgmp10 libgnutls30 libgomp1 libgpg-error0 libgpm2 libidn2-0 libitm1 liblsan0 liblz4-1 liblzma5 libmagic-mgc libmagic1 libmount1 libmpc3 libmpfr6 libncurses6 libncursesw6 libp11-kit0 libpam-runtime libpam0g libpcre3 libquadmath0 libseccomp2 libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libss2 libssl1.1 libstdc++6 libtasn1-6 libtinfo6 libtsan0 libubsan1 libunistring2 libuuid1 libzstd1 linux-libc-dev lsb-base make mime-support mount ncurses-base ncurses-bin patch procps psmisc python3-atomicwrites python3-attr python3-joblib python3-more-itertools python3-pkg-resources python3-pluggy python3-py python3-pytest python3-six readline-common sysvinit-utils tar tzdata xz-utils zlib1g 113 upgraded, 28 newly installed, 0 to remove and 27 not upgraded. Need to get 52.1 MB of archives. After this operation, 42.0 MB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://deb.debian.org/debian bullseye/main amd64 base-files amd64 11 [69.7 kB] Get:2 http://deb.debian.org/debian bullseye/main amd64 debianutils amd64 4.11.2 [101 kB] Get:3 http://deb.debian.org/debian bullseye/main amd64 bash amd64 5.1-2+b1 [1417 kB] Get:4 http://deb.debian.org/debian bullseye/main amd64 bsdutils amd64 1:2.36.1-7 [148 kB] Get:5 http://deb.debian.org/debian bullseye/main amd64 libpcre2-8-0 amd64 10.36-2 [247 kB] Get:6 http://deb.debian.org/debian bullseye/main amd64 libselinux1 amd64 3.1-3 [88.1 kB] Get:7 http://deb.debian.org/debian bullseye/main amd64 coreutils amd64 8.32-4+b1 [2867 kB] Get:8 http://deb.debian.org/debian bullseye/main amd64 tar amd64 1.34+dfsg-1 [847 kB] Get:9 http://deb.debian.org/debian bullseye/main amd64 dpkg amd64 1.20.7.1 [2464 kB] Get:10 http://deb.debian.org/debian bullseye/main amd64 debconf all 1.5.75 [145 kB] Get:11 http://deb.debian.org/debian bullseye/main amd64 dash amd64 0.5.11+git20200708+dd9ef66-5 [115 kB] Get:12 http://deb.debian.org/debian bullseye/main amd64 diffutils amd64 1:3.7-5 [373 kB] Get:13 http://deb.debian.org/debian bullseye/main amd64 findutils amd64 4.8.0-1 [697 kB] Get:14 http://deb.debian.org/debian bullseye/main amd64 grep amd64 3.6-1 [398 kB] Get:15 http://deb.debian.org/debian bullseye/main amd64 gzip amd64 1.10-4 [132 kB] Get:16 http://deb.debian.org/debian bullseye/main amd64 hostname amd64 3.23 [14.9 kB] Get:17 http://deb.debian.org/debian bullseye/main amd64 libncurses6 amd64 6.2+20201114-2 [102 kB] Get:18 http://deb.debian.org/debian bullseye/main amd64 libtinfo6 amd64 6.2+20201114-2 [341 kB] Get:19 http://deb.debian.org/debian bullseye/main amd64 libncursesw6 amd64 6.2+20201114-2 [132 kB] Get:20 http://deb.debian.org/debian bullseye/main amd64 ncurses-bin amd64 6.2+20201114-2 [428 kB] Get:21 http://deb.debian.org/debian bullseye/main amd64 gcc-10-base amd64 10.2.1-6 [201 kB] Get:22 http://deb.debian.org/debian bullseye/main amd64 libgcc-s1 amd64 10.2.1-6 [41.4 kB] Get:23 http://deb.debian.org/debian bullseye/main amd64 libstdc++6 amd64 10.2.1-6 [493 kB] Get:24 http://deb.debian.org/debian bullseye/main amd64 libxxhash0 amd64 0.8.0-2 [26.9 kB] Get:25 http://deb.debian.org/debian bullseye/main amd64 libzstd1 amd64 1.4.8+dfsg-2.1 [319 kB] Get:26 http://deb.debian.org/debian bullseye/main amd64 bzip2 amd64 1.0.8-4 [49.3 kB] Get:27 http://deb.debian.org/debian bullseye/main amd64 libbz2-1.0 amd64 1.0.8-4 [45.8 kB] Get:28 http://deb.debian.org/debian bullseye/main amd64 libgpg-error0 amd64 1.38-2 [77.5 kB] Get:29 http://deb.debian.org/debian bullseye/main amd64 libgcrypt20 amd64 1.8.7-3 [563 kB] Get:30 http://deb.debian.org/debian bullseye/main amd64 liblz4-1 amd64 1.9.3-1 [57.4 kB] Get:31 http://deb.debian.org/debian bullseye/main amd64 liblzma5 amd64 5.2.5-1.0 [168 kB] Get:32 http://deb.debian.org/debian bullseye/main amd64 zlib1g amd64 1:1.2.11.dfsg-2 [90.4 kB] Get:33 http://deb.debian.org/debian bullseye/main amd64 libapt-pkg6.0 amd64 2.2.2 [1013 kB] Get:34 http://deb.debian.org/debian bullseye/main amd64 libnettle8 amd64 3.7-2.1 [267 kB] Get:35 http://deb.debian.org/debian bullseye/main amd64 libgmp10 amd64 2:6.2.1+dfsg-1 [564 kB] Get:36 http://deb.debian.org/debian bullseye/main amd64 libhogweed6 amd64 3.7-2.1 [319 kB] Get:37 http://deb.debian.org/debian bullseye/main amd64 libffi7 amd64 3.3-6 [23.1 kB] Get:38 http://deb.debian.org/debian bullseye/main amd64 libp11-kit0 amd64 0.23.22-1 [337 kB] Get:39 http://deb.debian.org/debian bullseye/main amd64 libtasn1-6 amd64 4.16.0-2 [55.0 kB] Get:40 http://deb.debian.org/debian bullseye/main amd64 libunistring2 amd64 0.9.10-4 [379 kB] Get:41 http://deb.debian.org/debian bullseye/main amd64 libidn2-0 amd64 2.3.0-5 [86.1 kB] Get:42 http://deb.debian.org/debian bullseye/main amd64 libgnutls30 amd64 3.7.1-1 [1337 kB] Get:43 http://deb.debian.org/debian bullseye/main amd64 libseccomp2 amd64 2.5.1-1 [48.4 kB] Get:44 http://deb.debian.org/debian bullseye/main amd64 gpgv amd64 2.2.27-1 [625 kB] Get:45 http://deb.debian.org/debian bullseye/main amd64 debian-archive-keyring all 2021.1.1 [93.6 kB] Get:46 http://deb.debian.org/debian bullseye/main amd64 apt amd64 2.2.2 [1490 kB] Get:47 http://deb.debian.org/debian bullseye/main amd64 libdebconfclient0 amd64 0.256 [49.7 kB] Get:48 http://deb.debian.org/debian bullseye/main amd64 base-passwd amd64 3.5.49 [57.6 kB] Get:49 http://deb.debian.org/debian bullseye/main amd64 init-system-helpers all 1.60 [47.1 kB] Get:50 http://deb.debian.org/debian bullseye/main amd64 ncurses-base all 6.2+20201114-2 [271 kB] Get:51 http://deb.debian.org/debian bullseye/main amd64 lsb-base all 11.1.0 [28.7 kB] Get:52 http://deb.debian.org/debian bullseye/main amd64 sysvinit-utils amd64 2.96-6 [25.2 kB] Get:53 http://deb.debian.org/debian bullseye/main amd64 libblkid1 amd64 2.36.1-7 [193 kB] Get:54 http://deb.debian.org/debian bullseye/main amd64 libext2fs2 amd64 1.46.2-1 [257 kB] Get:55 http://deb.debian.org/debian bullseye/main amd64 e2fsprogs amd64 1.46.2-1 [614 kB] Get:56 http://deb.debian.org/debian bullseye/main amd64 logsave amd64 1.46.2-1 [74.7 kB] Get:57 http://deb.debian.org/debian bullseye/main amd64 libmount1 amd64 2.36.1-7 [211 kB] Get:58 http://deb.debian.org/debian bullseye/main amd64 mount amd64 2.36.1-7 [186 kB] Get:59 http://deb.debian.org/debian bullseye/main amd64 bsdextrautils amd64 2.36.1-7 [145 kB] Get:60 http://deb.debian.org/debian bullseye/main amd64 libpam-runtime all 1.4.0-7 [207 kB] Get:61 http://deb.debian.org/debian bullseye/main amd64 libuuid1 amd64 2.36.1-7 [83.6 kB] Get:62 http://deb.debian.org/debian bullseye/main amd64 libfdisk1 amd64 2.36.1-7 [237 kB] Get:63 http://deb.debian.org/debian bullseye/main amd64 libsmartcols1 amd64 2.36.1-7 [157 kB] Get:64 http://deb.debian.org/debian bullseye/main amd64 fdisk amd64 2.36.1-7 [192 kB] Get:65 http://deb.debian.org/debian bullseye/main amd64 libacl1 amd64 2.2.53-10 [31.1 kB] Get:66 http://deb.debian.org/debian bullseye/main amd64 libattr1 amd64 1:2.4.48-6 [21.6 kB] Get:67 http://deb.debian.org/debian bullseye/main amd64 libaudit-common all 1:3.0-2 [14.8 kB] Get:68 http://deb.debian.org/debian bullseye/main amd64 libcap-ng0 amd64 0.7.9-2.2+b1 [14.8 kB] Get:69 http://deb.debian.org/debian bullseye/main amd64 libaudit1 amd64 1:3.0-2 [50.4 kB] Get:70 http://deb.debian.org/debian bullseye/main amd64 libdb5.3 amd64 5.3.28+dfsg1-0.8 [687 kB] Get:71 http://deb.debian.org/debian bullseye/main amd64 libpam0g amd64 1.4.0-7 [129 kB] Get:72 http://deb.debian.org/debian bullseye/main amd64 libpcre3 amd64 2:8.39-13 [343 kB] Get:73 http://deb.debian.org/debian bullseye/main amd64 libsepol1 amd64 3.1-1 [265 kB] Get:74 http://deb.debian.org/debian bullseye/main amd64 libsemanage-common all 3.1-1 [21.3 kB] Get:75 http://deb.debian.org/debian bullseye/main amd64 libsemanage1 amd64 3.1-1+b2 [99.3 kB] Get:76 http://deb.debian.org/debian bullseye/main amd64 gcc-9-base amd64 9.3.0-22 [198 kB] Get:77 http://deb.debian.org/debian bullseye/main amd64 tzdata all 2021a-1 [284 kB] Get:78 http://deb.debian.org/debian bullseye/main amd64 libprocps8 amd64 2:3.3.17-4 [63.8 kB] Get:79 http://deb.debian.org/debian bullseye/main amd64 procps amd64 2:3.3.17-4 [501 kB] Get:80 http://deb.debian.org/debian bullseye/main amd64 readline-common all 8.1-1 [73.7 kB] Get:81 http://deb.debian.org/debian bullseye/main amd64 sensible-utils all 0.0.14 [14.8 kB] Get:82 http://deb.debian.org/debian bullseye/main amd64 libssl1.1 amd64 1.1.1k-1 [1553 kB] Get:83 http://deb.debian.org/debian bullseye/main amd64 openssl amd64 1.1.1k-1 [850 kB] Get:84 http://deb.debian.org/debian bullseye/main amd64 ca-certificates all 20210119 [158 kB] Get:85 http://deb.debian.org/debian bullseye/main amd64 file amd64 1:5.39-3 [69.1 kB] Get:86 http://deb.debian.org/debian bullseye/main amd64 libmagic1 amd64 1:5.39-3 [126 kB] Get:87 http://deb.debian.org/debian bullseye/main amd64 libmagic-mgc amd64 1:5.39-3 [273 kB] Get:88 http://deb.debian.org/debian bullseye/main amd64 manpages all 5.10-1 [1412 kB] Get:89 http://deb.debian.org/debian bullseye/main amd64 mime-support all 3.66 [10.9 kB] Get:90 http://deb.debian.org/debian bullseye/main amd64 mailcap all 3.69 [31.7 kB] Get:91 http://deb.debian.org/debian bullseye/main amd64 media-types all 4.0.0 [30.3 kB] Get:92 http://deb.debian.org/debian bullseye/main amd64 xz-utils amd64 5.2.5-1.0 [220 kB] Get:93 http://deb.debian.org/debian bullseye/main amd64 binutils-x86-64-linux-gnu amd64 2.35.2-2 [1809 kB] Get:94 http://deb.debian.org/debian bullseye/main amd64 libbinutils amd64 2.35.2-2 [570 kB] Get:95 http://deb.debian.org/debian bullseye/main amd64 binutils amd64 2.35.2-2 [61.2 kB] Get:96 http://deb.debian.org/debian bullseye/main amd64 binutils-common amd64 2.35.2-2 [2220 kB] Get:97 http://deb.debian.org/debian bullseye/main amd64 libctf-nobfd0 amd64 2.35.2-2 [110 kB] Get:98 http://deb.debian.org/debian bullseye/main amd64 libctf0 amd64 2.35.2-2 [53.2 kB] Get:99 http://deb.debian.org/debian bullseye/main amd64 dpkg-dev all 1.20.7.1 [2149 kB] Get:100 http://deb.debian.org/debian bullseye/main amd64 libdpkg-perl all 1.20.7.1 [1537 kB] Get:101 http://deb.debian.org/debian bullseye/main amd64 patch amd64 2.7.6-7 [128 kB] Get:102 http://deb.debian.org/debian bullseye/main amd64 make amd64 4.3-4 [396 kB] Get:103 http://deb.debian.org/debian bullseye/main amd64 libfakeroot amd64 1.25.3-1.1 [47.0 kB] Get:104 http://deb.debian.org/debian bullseye/main amd64 fakeroot amd64 1.25.3-1.1 [87.0 kB] Get:105 http://deb.debian.org/debian bullseye/main amd64 libasan5 amd64 9.3.0-22 [390 kB] Get:106 http://deb.debian.org/debian bullseye/main amd64 libatomic1 amd64 10.2.1-6 [9008 B] Get:107 http://deb.debian.org/debian bullseye/main amd64 libblas3 amd64 3.9.0-3 [153 kB] Get:108 http://deb.debian.org/debian bullseye/main amd64 libcc1-0 amd64 10.2.1-6 [47.0 kB] Get:109 http://deb.debian.org/debian bullseye/main amd64 libcom-err2 amd64 1.46.2-1 [74.0 kB] Get:110 http://deb.debian.org/debian bullseye/main amd64 libexpat1 amd64 2.2.10-2 [96.9 kB] Get:111 http://deb.debian.org/debian bullseye/main amd64 libgdbm6 amd64 1.19-2 [64.9 kB] Get:112 http://deb.debian.org/debian bullseye/main amd64 libgdbm-compat4 amd64 1.19-2 [44.7 kB] Get:113 http://deb.debian.org/debian bullseye/main amd64 libgomp1 amd64 10.2.1-6 [99.9 kB] Get:114 http://deb.debian.org/debian bullseye/main amd64 libgpm2 amd64 1.20.7-8 [35.6 kB] Get:115 http://deb.debian.org/debian bullseye/main amd64 libitm1 amd64 10.2.1-6 [25.8 kB] Get:116 http://deb.debian.org/debian bullseye/main amd64 liblsan0 amd64 10.2.1-6 [828 kB] Get:117 http://deb.debian.org/debian bullseye/main amd64 libmpfr6 amd64 4.1.0-3 [2012 kB] Get:118 http://deb.debian.org/debian bullseye/main amd64 libmpc3 amd64 1.2.0-1 [45.0 kB] Get:119 http://deb.debian.org/debian bullseye/main amd64 libquadmath0 amd64 10.2.1-6 [145 kB] Get:120 http://deb.debian.org/debian bullseye/main amd64 libss2 amd64 1.46.2-1 [78.5 kB] Get:121 http://deb.debian.org/debian bullseye/main amd64 libtsan0 amd64 10.2.1-6 [2000 kB] Get:122 http://deb.debian.org/debian bullseye/main amd64 libubsan1 amd64 10.2.1-6 [777 kB] Get:123 http://deb.debian.org/debian bullseye/main amd64 linux-libc-dev amd64 5.10.24-1 [1310 kB] Get:124 http://deb.debian.org/debian bullseye/main amd64 manpages-dev all 5.10-1 [2309 kB] Get:125 http://deb.debian.org/debian bullseye/main amd64 psmisc amd64 23.4-2 [198 kB] Get:126 http://deb.debian.org/debian bullseye/main amd64 python3-atomicwrites all 1.4.0-2 [10.3 kB] Get:127 http://deb.debian.org/debian bullseye/main amd64 python3-attr all 20.3.0-1 [52.9 kB] Get:128 http://deb.debian.org/debian bullseye/main amd64 python3-six all 1.15.0-2 [16.9 kB] Get:129 http://deb.debian.org/debian bullseye/main amd64 python3-more-itertools all 4.2.0-3 [42.7 kB] Get:130 http://deb.debian.org/debian bullseye/main amd64 python3-zipp all 1.0.0-3 [6060 B] Get:131 http://deb.debian.org/debian bullseye/main amd64 python3-importlib-metadata all 1.6.0-2 [10.3 kB] Get:132 http://deb.debian.org/debian bullseye/main amd64 python3-iniconfig all 1.1.1-1 [6308 B] Get:133 http://deb.debian.org/debian bullseye/main amd64 python3-pkg-resources all 52.0.0-3 [189 kB] Get:134 http://deb.debian.org/debian bullseye/main amd64 python3-joblib all 0.17.0-2 [213 kB] Get:135 http://deb.debian.org/debian bullseye/main amd64 python3-pyparsing all 2.4.7-1 [109 kB] Get:136 http://deb.debian.org/debian bullseye/main amd64 python3-packaging all 20.9-2 [33.5 kB] Get:137 http://deb.debian.org/debian bullseye/main amd64 python3-pluggy all 0.13.0-6 [22.3 kB] Get:138 http://deb.debian.org/debian bullseye/main amd64 python3-py all 1.10.0-1 [94.2 kB] Get:139 http://deb.debian.org/debian bullseye/main amd64 python3-pygments all 2.7.1+dfsg-2 [656 kB] Get:140 http://deb.debian.org/debian bullseye/main amd64 python3-toml all 0.10.1-1 [15.9 kB] Get:141 http://deb.debian.org/debian bullseye/main amd64 python3-pytest all 6.0.2-2 [211 kB] Fetched 52.1 MB in 8s (6281 kB/s) debconf: delaying package configuration, since apt-utils is not installed (Reading database ... 13816 files and directories currently installed.) Preparing to unpack .../base-files_11_amd64.deb ... Unpacking base-files (11) over (10.3+deb10u9) ... Setting up base-files (11) ... Installing new version of config file /etc/debian_version ... Installing new version of config file /etc/issue ... Installing new version of config file /etc/issue.net ... Updating /root/.profile to current default. (Reading database ... 13816 files and directories currently installed.) Preparing to unpack .../debianutils_4.11.2_amd64.deb ... Unpacking debianutils (4.11.2) over (4.8.6.1) ... Setting up debianutils (4.11.2) ... (Reading database ... 13816 files and directories currently installed.) Preparing to unpack .../bash_5.1-2+b1_amd64.deb ... Unpacking bash (5.1-2+b1) over (5.0-4) ... Setting up bash (5.1-2+b1) ... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode (Reading database ... 13818 files and directories currently installed.) Preparing to unpack .../bsdutils_1%3a2.36.1-7_amd64.deb ... Unpacking bsdutils (1:2.36.1-7) over (1:2.33.1-0.1) ... Setting up bsdutils (1:2.36.1-7) ... Selecting previously unselected package libpcre2-8-0:amd64. (Reading database ... 13821 files and directories currently installed.) Preparing to unpack .../libpcre2-8-0_10.36-2_amd64.deb ... Unpacking libpcre2-8-0:amd64 (10.36-2) ... Setting up libpcre2-8-0:amd64 (10.36-2) ... (Reading database ... 13828 files and directories currently installed.) Preparing to unpack .../libselinux1_3.1-3_amd64.deb ... Unpacking libselinux1:amd64 (3.1-3) over (2.8-1+b1) ... Setting up libselinux1:amd64 (3.1-3) ... (Reading database ... 13827 files and directories currently installed.) Preparing to unpack .../coreutils_8.32-4+b1_amd64.deb ... Unpacking coreutils (8.32-4+b1) over (8.30-3) ... Setting up coreutils (8.32-4+b1) ... (Reading database ... 13917 files and directories currently installed.) Preparing to unpack .../tar_1.34+dfsg-1_amd64.deb ... Unpacking tar (1.34+dfsg-1) over (1.30+dfsg-6) ... Setting up tar (1.34+dfsg-1) ... (Reading database ... 13917 files and directories currently installed.) Preparing to unpack .../dpkg_1.20.7.1_amd64.deb ... Unpacking dpkg (1.20.7.1) over (1.19.7) ... Setting up dpkg (1.20.7.1) ... Installing new version of config file /etc/cron.daily/dpkg ... (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../debconf_1.5.75_all.deb ... Unpacking debconf (1.5.75) over (1.5.71) ... Setting up debconf (1.5.75) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../dash_0.5.11+git20200708+dd9ef66-5_amd64.deb ... Unpacking dash (0.5.11+git20200708+dd9ef66-5) over (0.5.10.2-5) ... Setting up dash (0.5.11+git20200708+dd9ef66-5) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../diffutils_1%3a3.7-5_amd64.deb ... Unpacking diffutils (1:3.7-5) over (1:3.7-3) ... Setting up diffutils (1:3.7-5) ... (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../findutils_4.8.0-1_amd64.deb ... Unpacking findutils (4.8.0-1) over (4.6.0+git+20190209-2) ... Setting up findutils (4.8.0-1) ... (Reading database ... 13940 files and directories currently installed.) Preparing to unpack .../archives/grep_3.6-1_amd64.deb ... Unpacking grep (3.6-1) over (3.3-1) ... Setting up grep (3.6-1) ... (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../archives/gzip_1.10-4_amd64.deb ... Unpacking gzip (1.10-4) over (1.9-3) ... Setting up gzip (1.10-4) ... (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../hostname_3.23_amd64.deb ... Unpacking hostname (3.23) over (3.21) ... Setting up hostname (3.23) ... (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../libncurses6_6.2+20201114-2_amd64.deb ... Unpacking libncurses6:amd64 (6.2+20201114-2) over (6.1+20181013-2+deb10u2) ... Preparing to unpack .../libtinfo6_6.2+20201114-2_amd64.deb ... Unpacking libtinfo6:amd64 (6.2+20201114-2) over (6.1+20181013-2+deb10u2) ... Setting up libtinfo6:amd64 (6.2+20201114-2) ... (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../libncursesw6_6.2+20201114-2_amd64.deb ... Unpacking libncursesw6:amd64 (6.2+20201114-2) over (6.1+20181013-2+deb10u2) ... Setting up libncursesw6:amd64 (6.2+20201114-2) ... (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../ncurses-bin_6.2+20201114-2_amd64.deb ... Unpacking ncurses-bin (6.2+20201114-2) over (6.1+20181013-2+deb10u2) ... Setting up ncurses-bin (6.2+20201114-2) ... Selecting previously unselected package gcc-10-base:amd64. (Reading database ... 13941 files and directories currently installed.) Preparing to unpack .../gcc-10-base_10.2.1-6_amd64.deb ... Unpacking gcc-10-base:amd64 (10.2.1-6) ... Setting up gcc-10-base:amd64 (10.2.1-6) ... Selecting previously unselected package libgcc-s1:amd64. (Reading database ... 13946 files and directories currently installed.) Preparing to unpack .../libgcc-s1_10.2.1-6_amd64.deb ... Unpacking libgcc-s1:amd64 (10.2.1-6) ... Replacing files in old package libgcc1:amd64 (1:8.3.0-6) ... Setting up libgcc-s1:amd64 (10.2.1-6) ... (Reading database ... 13948 files and directories currently installed.) Preparing to unpack .../libstdc++6_10.2.1-6_amd64.deb ... Unpacking libstdc++6:amd64 (10.2.1-6) over (8.3.0-6) ... Setting up libstdc++6:amd64 (10.2.1-6) ... Selecting previously unselected package libxxhash0:amd64. (Reading database ... 13948 files and directories currently installed.) Preparing to unpack .../libxxhash0_0.8.0-2_amd64.deb ... Unpacking libxxhash0:amd64 (0.8.0-2) ... Setting up libxxhash0:amd64 (0.8.0-2) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../libzstd1_1.4.8+dfsg-2.1_amd64.deb ... Unpacking libzstd1:amd64 (1.4.8+dfsg-2.1) over (1.3.8+dfsg-3+deb10u2) ... Setting up libzstd1:amd64 (1.4.8+dfsg-2.1) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../bzip2_1.0.8-4_amd64.deb ... Unpacking bzip2 (1.0.8-4) over (1.0.6-9.2~deb10u1) ... Preparing to unpack .../libbz2-1.0_1.0.8-4_amd64.deb ... Unpacking libbz2-1.0:amd64 (1.0.8-4) over (1.0.6-9.2~deb10u1) ... Setting up libbz2-1.0:amd64 (1.0.8-4) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../libgpg-error0_1.38-2_amd64.deb ... Unpacking libgpg-error0:amd64 (1.38-2) over (1.35-1) ... Setting up libgpg-error0:amd64 (1.38-2) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../libgcrypt20_1.8.7-3_amd64.deb ... Unpacking libgcrypt20:amd64 (1.8.7-3) over (1.8.4-5) ... Setting up libgcrypt20:amd64 (1.8.7-3) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../liblz4-1_1.9.3-1_amd64.deb ... Unpacking liblz4-1:amd64 (1.9.3-1) over (1.8.3-1) ... Setting up liblz4-1:amd64 (1.9.3-1) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../liblzma5_5.2.5-1.0_amd64.deb ... Unpacking liblzma5:amd64 (5.2.5-1.0) over (5.2.4-1) ... Setting up liblzma5:amd64 (5.2.5-1.0) ... (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../zlib1g_1%3a1.2.11.dfsg-2_amd64.deb ... Unpacking zlib1g:amd64 (1:1.2.11.dfsg-2) over (1:1.2.11.dfsg-1) ... Setting up zlib1g:amd64 (1:1.2.11.dfsg-2) ... Selecting previously unselected package libapt-pkg6.0:amd64. (Reading database ... 13954 files and directories currently installed.) Preparing to unpack .../libapt-pkg6.0_2.2.2_amd64.deb ... Unpacking libapt-pkg6.0:amd64 (2.2.2) ... Setting up libapt-pkg6.0:amd64 (2.2.2) ... Selecting previously unselected package libnettle8:amd64. (Reading database ... 14003 files and directories currently installed.) Preparing to unpack .../libnettle8_3.7-2.1_amd64.deb ... Unpacking libnettle8:amd64 (3.7-2.1) ... Setting up libnettle8:amd64 (3.7-2.1) ... (Reading database ... 14011 files and directories currently installed.) Preparing to unpack .../libgmp10_2%3a6.2.1+dfsg-1_amd64.deb ... Unpacking libgmp10:amd64 (2:6.2.1+dfsg-1) over (2:6.1.2+dfsg-4) ... Setting up libgmp10:amd64 (2:6.2.1+dfsg-1) ... Selecting previously unselected package libhogweed6:amd64. (Reading database ... 14012 files and directories currently installed.) Preparing to unpack .../libhogweed6_3.7-2.1_amd64.deb ... Unpacking libhogweed6:amd64 (3.7-2.1) ... Setting up libhogweed6:amd64 (3.7-2.1) ... Selecting previously unselected package libffi7:amd64. (Reading database ... 14018 files and directories currently installed.) Preparing to unpack .../libffi7_3.3-6_amd64.deb ... Unpacking libffi7:amd64 (3.3-6) ... Setting up libffi7:amd64 (3.3-6) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../libp11-kit0_0.23.22-1_amd64.deb ... Unpacking libp11-kit0:amd64 (0.23.22-1) over (0.23.15-2+deb10u1) ... Setting up libp11-kit0:amd64 (0.23.22-1) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../libtasn1-6_4.16.0-2_amd64.deb ... Unpacking libtasn1-6:amd64 (4.16.0-2) over (4.13-3) ... Setting up libtasn1-6:amd64 (4.16.0-2) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../libunistring2_0.9.10-4_amd64.deb ... Unpacking libunistring2:amd64 (0.9.10-4) over (0.9.10-1) ... Setting up libunistring2:amd64 (0.9.10-4) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../libidn2-0_2.3.0-5_amd64.deb ... Unpacking libidn2-0:amd64 (2.3.0-5) over (2.0.5-1+deb10u1) ... Setting up libidn2-0:amd64 (2.3.0-5) ... (Reading database ... 14024 files and directories currently installed.) Preparing to unpack .../libgnutls30_3.7.1-1_amd64.deb ... Unpacking libgnutls30:amd64 (3.7.1-1) over (3.6.7-4+deb10u6) ... Setting up libgnutls30:amd64 (3.7.1-1) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.5.1-1_amd64.deb ... Unpacking libseccomp2:amd64 (2.5.1-1) over (2.3.3-4) ... Setting up libseccomp2:amd64 (2.5.1-1) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../gpgv_2.2.27-1_amd64.deb ... Unpacking gpgv (2.2.27-1) over (2.2.12-1+deb10u1) ... Setting up gpgv (2.2.27-1) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../debian-archive-keyring_2021.1.1_all.deb ... Unpacking debian-archive-keyring (2021.1.1) over (2019.1+deb10u1) ... Setting up debian-archive-keyring (2021.1.1) ... (Reading database ... 14023 files and directories currently installed.) Preparing to unpack .../archives/apt_2.2.2_amd64.deb ... Unpacking apt (2.2.2) over (1.8.2.2) ... Setting up apt (2.2.2) ... Installing new version of config file /etc/apt/apt.conf.d/01autoremove ... Installing new version of config file /etc/kernel/postinst.d/apt-auto-removal ... (Reading database ... 14028 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.256_amd64.deb ... Unpacking libdebconfclient0:amd64 (0.256) over (0.249) ... Setting up libdebconfclient0:amd64 (0.256) ... (Reading database ... 14028 files and directories currently installed.) Preparing to unpack .../base-passwd_3.5.49_amd64.deb ... Unpacking base-passwd (3.5.49) over (3.5.46) ... Setting up base-passwd (3.5.49) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Configuring base-passwd ----------------------- update-passwd has found a difference between your system accounts and the current Debian defaults. It is advisable to allow update-passwd to change your system; without those changes some packages might not work correctly. For more documentation on the Debian account policies, please see /usr/share/doc/base-passwd/README. The proposed change is: Change the home directory of user "irc" from /var/run/ircd to /run/ircd If you allow this change, a backup of modified files will be made with the extension .org, which you can use if necessary to restore the current settings. If you do not make this change now, you can make it later with the update-passwd utility. Do you want to change the home directory of user irc? [yes/no] y Changing home-directory of irc from /var/run/ircd to /run/ircd 1 changes have been made, rewriting files Writing passwd-file to /etc/passwd Writing shadow-file to /etc/shadow Writing group-file to /etc/group (Reading database ... 14028 files and directories currently installed.) Preparing to unpack .../init-system-helpers_1.60_all.deb ... Unpacking init-system-helpers (1.60) over (1.56+nmu1) ... Setting up init-system-helpers (1.60) ... (Reading database ... 14028 files and directories currently installed.) Preparing to unpack .../ncurses-base_6.2+20201114-2_all.deb ... Unpacking ncurses-base (6.2+20201114-2) over (6.1+20181013-2+deb10u2) ... Setting up ncurses-base (6.2+20201114-2) ... (Reading database ... 14031 files and directories currently installed.) Preparing to unpack .../lsb-base_11.1.0_all.deb ... Unpacking lsb-base (11.1.0) over (10.2019051400) ... Setting up lsb-base (11.1.0) ... (Reading database ... 14031 files and directories currently installed.) Preparing to unpack .../sysvinit-utils_2.96-6_amd64.deb ... Unpacking sysvinit-utils (2.96-6) over (2.93-8) ... Setting up sysvinit-utils (2.96-6) ... (Reading database ... 14029 files and directories currently installed.) Preparing to unpack .../libblkid1_2.36.1-7_amd64.deb ... Unpacking libblkid1:amd64 (2.36.1-7) over (2.33.1-0.1) ... Setting up libblkid1:amd64 (2.36.1-7) ... (Reading database ... 14029 files and directories currently installed.) Preparing to unpack .../libext2fs2_1.46.2-1_amd64.deb ... Unpacking libext2fs2:amd64 (1.46.2-1) over (1.44.5-1+deb10u3) ... Setting up libext2fs2:amd64 (1.46.2-1) ... (Reading database ... 14029 files and directories currently installed.) Preparing to unpack .../e2fsprogs_1.46.2-1_amd64.deb ... Unpacking e2fsprogs (1.46.2-1) over (1.44.5-1+deb10u3) ... Selecting previously unselected package logsave. Preparing to unpack .../logsave_1.46.2-1_amd64.deb ... Unpacking logsave (1.46.2-1) ... Preparing to unpack .../libmount1_2.36.1-7_amd64.deb ... Unpacking libmount1:amd64 (2.36.1-7) over (2.33.1-0.1) ... Setting up libmount1:amd64 (2.36.1-7) ... (Reading database ... 14048 files and directories currently installed.) Preparing to unpack .../mount_2.36.1-7_amd64.deb ... Unpacking mount (2.36.1-7) over (2.33.1-0.1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../bsdextrautils_2.36.1-7_amd64.deb ... Unpacking bsdextrautils (2.36.1-7) ... Preparing to unpack .../libpam-runtime_1.4.0-7_all.deb ... Unpacking libpam-runtime (1.4.0-7) over (1.3.1-5) ... Setting up libpam-runtime (1.4.0-7) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libuuid1_2.36.1-7_amd64.deb ... Unpacking libuuid1:amd64 (2.36.1-7) over (2.33.1-0.1) ... Setting up libuuid1:amd64 (2.36.1-7) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libfdisk1_2.36.1-7_amd64.deb ... Unpacking libfdisk1:amd64 (2.36.1-7) over (2.33.1-0.1) ... Setting up libfdisk1:amd64 (2.36.1-7) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.36.1-7_amd64.deb ... Unpacking libsmartcols1:amd64 (2.36.1-7) over (2.33.1-0.1) ... Setting up libsmartcols1:amd64 (2.36.1-7) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../fdisk_2.36.1-7_amd64.deb ... Unpacking fdisk (2.36.1-7) over (2.33.1-0.1) ... Setting up fdisk (2.36.1-7) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libacl1_2.2.53-10_amd64.deb ... Unpacking libacl1:amd64 (2.2.53-10) over (2.2.53-4) ... Setting up libacl1:amd64 (2.2.53-10) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libattr1_1%3a2.4.48-6_amd64.deb ... Unpacking libattr1:amd64 (1:2.4.48-6) over (1:2.4.48-4) ... Setting up libattr1:amd64 (1:2.4.48-6) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libaudit-common_1%3a3.0-2_all.deb ... Unpacking libaudit-common (1:3.0-2) over (1:2.8.4-3) ... Setting up libaudit-common (1:3.0-2) ... (Reading database ... 14036 files and directories currently installed.) Preparing to unpack .../libcap-ng0_0.7.9-2.2+b1_amd64.deb ... Unpacking libcap-ng0:amd64 (0.7.9-2.2+b1) over (0.7.9-2) ... Setting up libcap-ng0:amd64 (0.7.9-2.2+b1) ... (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libaudit1_1%3a3.0-2_amd64.deb ... Unpacking libaudit1:amd64 (1:3.0-2) over (1:2.8.4-3) ... Setting up libaudit1:amd64 (1:3.0-2) ... (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libdb5.3_5.3.28+dfsg1-0.8_amd64.deb ... Unpacking libdb5.3:amd64 (5.3.28+dfsg1-0.8) over (5.3.28+dfsg1-0.5) ... Setting up libdb5.3:amd64 (5.3.28+dfsg1-0.8) ... (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libpam0g_1.4.0-7_amd64.deb ... Unpacking libpam0g:amd64 (1.4.0-7) over (1.3.1-5) ... Setting up libpam0g:amd64 (1.4.0-7) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Checking for services that may need to be restarted...Checking init scripts... Nothing to restart. (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libpcre3_2%3a8.39-13_amd64.deb ... Unpacking libpcre3:amd64 (2:8.39-13) over (2:8.39-12) ... Setting up libpcre3:amd64 (2:8.39-13) ... (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libsepol1_3.1-1_amd64.deb ... Unpacking libsepol1:amd64 (3.1-1) over (2.8-1) ... Setting up libsepol1:amd64 (3.1-1) ... (Reading database ... 14037 files and directories currently installed.) Preparing to unpack .../libsemanage-common_3.1-1_all.deb ... Unpacking libsemanage-common (3.1-1) over (2.8-2) ... Setting up libsemanage-common (3.1-1) ... (Reading database ... 14038 files and directories currently installed.) Preparing to unpack .../libsemanage1_3.1-1+b2_amd64.deb ... Unpacking libsemanage1:amd64 (3.1-1+b2) over (2.8-2) ... Setting up libsemanage1:amd64 (3.1-1+b2) ... Selecting previously unselected package gcc-9-base:amd64. (Reading database ... 14039 files and directories currently installed.) Preparing to unpack .../00-gcc-9-base_9.3.0-22_amd64.deb ... Unpacking gcc-9-base:amd64 (9.3.0-22) ... Preparing to unpack .../01-tzdata_2021a-1_all.deb ... Unpacking tzdata (2021a-1) over (2021a-0+deb10u1) ... Selecting previously unselected package libprocps8:amd64. Preparing to unpack .../02-libprocps8_2%3a3.3.17-4_amd64.deb ... Unpacking libprocps8:amd64 (2:3.3.17-4) ... Preparing to unpack .../03-procps_2%3a3.3.17-4_amd64.deb ... Unpacking procps (2:3.3.17-4) over (2:3.3.15-2) ... Preparing to unpack .../04-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) over (7.0-5) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Preparing to unpack .../06-libssl1.1_1.1.1k-1_amd64.deb ... Unpacking libssl1.1:amd64 (1.1.1k-1) over (1.1.1d-0+deb10u5) ... Selecting previously unselected package openssl. Preparing to unpack .../07-openssl_1.1.1k-1_amd64.deb ... Unpacking openssl (1.1.1k-1) ... Selecting previously unselected package ca-certificates. Preparing to unpack .../08-ca-certificates_20210119_all.deb ... Unpacking ca-certificates (20210119) ... Preparing to unpack .../09-file_1%3a5.39-3_amd64.deb ... Unpacking file (1:5.39-3) over (1:5.35-4+deb10u2) ... Preparing to unpack .../10-libmagic1_1%3a5.39-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.39-3) over (1:5.35-4+deb10u2) ... Preparing to unpack .../11-libmagic-mgc_1%3a5.39-3_amd64.deb ... Unpacking libmagic-mgc (1:5.39-3) over (1:5.35-4+deb10u2) ... Selecting previously unselected package manpages. Preparing to unpack .../12-manpages_5.10-1_all.deb ... Unpacking manpages (5.10-1) ... Preparing to unpack .../13-mime-support_3.66_all.deb ... Unpacking mime-support (3.66) over (3.62) ... Selecting previously unselected package mailcap. Preparing to unpack .../14-mailcap_3.69_all.deb ... Unpacking mailcap (3.69) ... Selecting previously unselected package media-types. Preparing to unpack .../15-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Preparing to unpack .../16-xz-utils_5.2.5-1.0_amd64.deb ... Unpacking xz-utils (5.2.5-1.0) over (5.2.4-1) ... Preparing to unpack .../17-binutils-x86-64-linux-gnu_2.35.2-2_amd64.deb ... Unpacking binutils-x86-64-linux-gnu (2.35.2-2) over (2.31.1-16) ... Preparing to unpack .../18-libbinutils_2.35.2-2_amd64.deb ... Unpacking libbinutils:amd64 (2.35.2-2) over (2.31.1-16) ... Preparing to unpack .../19-binutils_2.35.2-2_amd64.deb ... Unpacking binutils (2.35.2-2) over (2.31.1-16) ... Preparing to unpack .../20-binutils-common_2.35.2-2_amd64.deb ... Unpacking binutils-common:amd64 (2.35.2-2) over (2.31.1-16) ... Selecting previously unselected package libctf-nobfd0:amd64. Preparing to unpack .../21-libctf-nobfd0_2.35.2-2_amd64.deb ... Unpacking libctf-nobfd0:amd64 (2.35.2-2) ... Selecting previously unselected package libctf0:amd64. Preparing to unpack .../22-libctf0_2.35.2-2_amd64.deb ... Unpacking libctf0:amd64 (2.35.2-2) ... Preparing to unpack .../23-dpkg-dev_1.20.7.1_all.deb ... Unpacking dpkg-dev (1.20.7.1) over (1.19.7) ... Preparing to unpack .../24-libdpkg-perl_1.20.7.1_all.deb ... Unpacking libdpkg-perl (1.20.7.1) over (1.19.7) ... Preparing to unpack .../25-patch_2.7.6-7_amd64.deb ... Unpacking patch (2.7.6-7) over (2.7.6-3+deb10u1) ... Preparing to unpack .../26-make_4.3-4_amd64.deb ... Unpacking make (4.3-4) over (4.2.1-1.2) ... Preparing to unpack .../27-libfakeroot_1.25.3-1.1_amd64.deb ... Unpacking libfakeroot:amd64 (1.25.3-1.1) over (1.23-1) ... Preparing to unpack .../28-fakeroot_1.25.3-1.1_amd64.deb ... Unpacking fakeroot (1.25.3-1.1) over (1.23-1) ... Preparing to unpack .../29-libasan5_9.3.0-22_amd64.deb ... Unpacking libasan5:amd64 (9.3.0-22) over (8.3.0-6) ... Preparing to unpack .../30-libatomic1_10.2.1-6_amd64.deb ... Unpacking libatomic1:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../31-libblas3_3.9.0-3_amd64.deb ... Unpacking libblas3:amd64 (3.9.0-3) over (3.8.0-2) ... Preparing to unpack .../32-libcc1-0_10.2.1-6_amd64.deb ... Unpacking libcc1-0:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../33-libcom-err2_1.46.2-1_amd64.deb ... Unpacking libcom-err2:amd64 (1.46.2-1) over (1.44.5-1+deb10u3) ... Preparing to unpack .../34-libexpat1_2.2.10-2_amd64.deb ... Unpacking libexpat1:amd64 (2.2.10-2) over (2.2.6-2+deb10u1) ... Preparing to unpack .../35-libgdbm6_1.19-2_amd64.deb ... Unpacking libgdbm6:amd64 (1.19-2) over (1.18.1-4) ... Preparing to unpack .../36-libgdbm-compat4_1.19-2_amd64.deb ... Unpacking libgdbm-compat4:amd64 (1.19-2) over (1.18.1-4) ... Preparing to unpack .../37-libgomp1_10.2.1-6_amd64.deb ... Unpacking libgomp1:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../38-libgpm2_1.20.7-8_amd64.deb ... Unpacking libgpm2:amd64 (1.20.7-8) over (1.20.7-5) ... Preparing to unpack .../39-libitm1_10.2.1-6_amd64.deb ... Unpacking libitm1:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../40-liblsan0_10.2.1-6_amd64.deb ... Unpacking liblsan0:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../41-libmpfr6_4.1.0-3_amd64.deb ... Unpacking libmpfr6:amd64 (4.1.0-3) over (4.0.2-1) ... Preparing to unpack .../42-libmpc3_1.2.0-1_amd64.deb ... Unpacking libmpc3:amd64 (1.2.0-1) over (1.1.0-1) ... Preparing to unpack .../43-libquadmath0_10.2.1-6_amd64.deb ... Unpacking libquadmath0:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../44-libss2_1.46.2-1_amd64.deb ... Unpacking libss2:amd64 (1.46.2-1) over (1.44.5-1+deb10u3) ... Preparing to unpack .../45-libtsan0_10.2.1-6_amd64.deb ... Unpacking libtsan0:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../46-libubsan1_10.2.1-6_amd64.deb ... Unpacking libubsan1:amd64 (10.2.1-6) over (8.3.0-6) ... Preparing to unpack .../47-linux-libc-dev_5.10.24-1_amd64.deb ... Unpacking linux-libc-dev:amd64 (5.10.24-1) over (4.19.181-1) ... Selecting previously unselected package manpages-dev. Preparing to unpack .../48-manpages-dev_5.10-1_all.deb ... Unpacking manpages-dev (5.10-1) ... Preparing to unpack .../49-psmisc_23.4-2_amd64.deb ... Unpacking psmisc (23.4-2) over (23.2-1) ... Preparing to unpack .../50-python3-atomicwrites_1.4.0-2_all.deb ... Unpacking python3-atomicwrites (1.4.0-2) over (1.1.5-2) ... Preparing to unpack .../51-python3-attr_20.3.0-1_all.deb ... Unpacking python3-attr (20.3.0-1) over (18.2.0-1) ... Preparing to unpack .../52-python3-six_1.15.0-2_all.deb ... Unpacking python3-six (1.15.0-2) over (1.12.0-1) ... Preparing to unpack .../53-python3-more-itertools_4.2.0-3_all.deb ... Unpacking python3-more-itertools (4.2.0-3) over (4.2.0-1) ... Selecting previously unselected package python3-zipp. Preparing to unpack .../54-python3-zipp_1.0.0-3_all.deb ... Unpacking python3-zipp (1.0.0-3) ... Selecting previously unselected package python3-importlib-metadata. Preparing to unpack .../55-python3-importlib-metadata_1.6.0-2_all.deb ... Unpacking python3-importlib-metadata (1.6.0-2) ... Selecting previously unselected package python3-iniconfig. Preparing to unpack .../56-python3-iniconfig_1.1.1-1_all.deb ... Unpacking python3-iniconfig (1.1.1-1) ... Preparing to unpack .../57-python3-pkg-resources_52.0.0-3_all.deb ... Unpacking python3-pkg-resources (52.0.0-3) over (40.8.0-1) ... Preparing to unpack .../58-python3-joblib_0.17.0-2_all.deb ... Unpacking python3-joblib (0.17.0-2) over (0.13.0-2) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../59-python3-pyparsing_2.4.7-1_all.deb ... Unpacking python3-pyparsing (2.4.7-1) ... Selecting previously unselected package python3-packaging. Preparing to unpack .../60-python3-packaging_20.9-2_all.deb ... Unpacking python3-packaging (20.9-2) ... Preparing to unpack .../61-python3-pluggy_0.13.0-6_all.deb ... Unpacking python3-pluggy (0.13.0-6) over (0.8.0-1) ... Preparing to unpack .../62-python3-py_1.10.0-1_all.deb ... Unpacking python3-py (1.10.0-1) over (1.7.0-2) ... Selecting previously unselected package python3-pygments. Preparing to unpack .../63-python3-pygments_2.7.1+dfsg-2_all.deb ... Unpacking python3-pygments (2.7.1+dfsg-2) ... Selecting previously unselected package python3-toml. Preparing to unpack .../64-python3-toml_0.10.1-1_all.deb ... Unpacking python3-toml (0.10.1-1) ... Preparing to unpack .../65-python3-pytest_6.0.2-2_all.deb ... Unpacking python3-pytest (6.0.2-2) over (3.10.1-2) ... Setting up python3-pkg-resources (52.0.0-3) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-pkg-resources (--configure): installed python3-pkg-resources package post-installation script subprocess returned error exit status 1 Setting up libexpat1:amd64 (2.2.10-2) ... Setting up media-types (4.0.0) ... Installing new version of config file /etc/mime.types ... Setting up python3-iniconfig (1.1.1-1) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-iniconfig (--configure): installed python3-iniconfig package post-installation script subprocess returned error exit status 1 Setting up python3-attr (20.3.0-1) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-attr (--configure): installed python3-attr package post-installation script subprocess returned error exit status 1 Setting up libgpm2:amd64 (1.20.7-8) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode dpkg: dependency problems prevent configuration of python3-py: python3-py depends on python3-pkg-resources; however: Package python3-pkg-resources is not configured yet. dpkg: error processing package python3-py (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of python3-joblib: python3-joblib depends on python3-pkg-resources; however: Package python3-pkg-resources is not configured yet. dpkg: error processing package python3-joblib (--configure): dependency problems - leaving unconfigured Setting up libmagic-mgc (1:5.39-3) ... Setting up psmisc (23.4-2) ... Setting up manpages (5.10-1) ... dpkg: dependency problems prevent configuration of python3-pytest: python3-pytest depends on python3-attr (>= 17.4.0); however: Package python3-attr is not configured yet. python3-pytest depends on python3-pkg-resources; however: Package python3-pkg-resources is not configured yet. python3-pytest depends on python3-py (>= 1.5.0); however: Package python3-py is not configured yet. python3-pytest depends on python3-iniconfig; however: Package python3-iniconfig is not configured yet. dpkg: error processing package python3-pytest (--configure): dependency problems - leaving unconfigured Setting up libssl1.1:amd64 (1.1.1k-1) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Setting up binutils-common:amd64 (2.35.2-2) ... Setting up libmagic1:amd64 (1:5.39-3) ... Setting up linux-libc-dev:amd64 (5.10.24-1) ... Setting up libctf-nobfd0:amd64 (2.35.2-2) ... Setting up libcom-err2:amd64 (1.46.2-1) ... Setting up file (1:5.39-3) ... Setting up libgomp1:amd64 (10.2.1-6) ... Setting up bzip2 (1.0.8-4) ... Setting up libfakeroot:amd64 (1.25.3-1.1) ... Setting up python3-atomicwrites (1.4.0-2) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-atomicwrites (--configure): installed python3-atomicwrites package post-installation script subprocess returned error exit status 1 Setting up tzdata (2021a-1) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Current default time zone: 'Etc/UTC' Local time is now: Mon Mar 29 19:27:12 UTC 2021. Universal Time is now: Mon Mar 29 19:27:12 UTC 2021. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up fakeroot (1.25.3-1.1) ... Setting up python3-six (1.15.0-2) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-six (--configure): installed python3-six package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of python3-pygments: python3-pygments depends on python3-pkg-resources; however: Package python3-pkg-resources is not configured yet. dpkg: error processing package python3-pygments (--configure): dependency problems - leaving unconfigured Setting up libblas3:amd64 (3.9.0-3) ... Setting up python3-pyparsing (2.4.7-1) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-pyparsing (--configure): installed python3-pyparsing package post-installation script subprocess returned error exit status 1 Setting up make (4.3-4) ... Setting up libmpfr6:amd64 (4.1.0-3) ... Setting up libncurses6:amd64 (6.2+20201114-2) ... Setting up xz-utils (5.2.5-1.0) ... Setting up libquadmath0:amd64 (10.2.1-6) ... Setting up libmpc3:amd64 (1.2.0-1) ... Setting up libatomic1:amd64 (10.2.1-6) ... Setting up patch (2.7.6-7) ... Setting up libss2:amd64 (1.46.2-1) ... Setting up python3-toml (0.10.1-1) ... Traceback (most recent call last): File "/usr/bin/py3compile", line 290, in <module> main() File "/usr/bin/py3compile", line 266, in main e_patterns = get_exclude_patterns() File "/usr/bin/py3compile", line 93, in get_exclude_patterns for type_, vers, dname, pattern in get_exclude_patterns_from_dir(): File "/usr/share/python3/debpython/__init__.py", line 22, in __call__ self.cache[key] = self.func(*args, **kwargs) File "/usr/bin/py3compile", line 68, in get_exclude_patterns_from_dir type_, vrange, dname, pattern = line.split('|', 3) ValueError: not enough values to unpack (expected 4, got 3) dpkg: error processing package python3-toml (--configure): installed python3-toml package post-installation script subprocess returned error exit status 1 Setting up libdpkg-perl (1.20.7.1) ... Setting up logsave (1.46.2-1) ... Setting up libubsan1:amd64 (10.2.1-6) ... Setting up mount (2.36.1-7) ... Setting up sensible-utils (0.0.14) ... Setting up libbinutils:amd64 (2.35.2-2) ... Setting up openssl (1.1.1k-1) ... Setting up mailcap (3.69) ... Setting up readline-common (8.1-1) ... Setting up libcc1-0:amd64 (10.2.1-6) ... Setting up liblsan0:amd64 (10.2.1-6) ... Setting up libprocps8:amd64 (2:3.3.17-4) ... Setting up libitm1:amd64 (10.2.1-6) ... Setting up libgdbm6:amd64 (1.19-2) ... Setting up gcc-9-base:amd64 (9.3.0-22) ... Setting up libtsan0:amd64 (10.2.1-6) ... Setting up libctf0:amd64 (2.35.2-2) ... dpkg: dependency problems prevent configuration of python3-more-itertools: python3-more-itertools depends on python3-six (<< 2.0.0); however: Package python3-six is not configured yet. python3-more-itertools depends on python3-six (>= 1.0.0); however: Package python3-six is not configured yet. dpkg: error processing package python3-more-itertools (--configure): dependency problems - leaving unconfigured Setting up manpages-dev (5.10-1) ... Setting up mime-support (3.66) ... Setting up e2fsprogs (1.46.2-1) ... dpkg: dependency problems prevent configuration of python3-zipp: python3-zipp depends on python3-more-itertools; however: Package python3-more-itertools is not configured yet. dpkg: error processing package python3-zipp (--configure): dependency problems - leaving unconfigured Setting up ca-certificates (20210119) ... debconf: unable to initialize frontend: Dialog debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.) debconf: falling back to frontend: Readline Updating certificates in /etc/ssl/certs... 129 added, 0 removed; done. Setting up libasan5:amd64 (9.3.0-22) ... dpkg: dependency problems prevent configuration of python3-packaging: python3-packaging depends on python3-pyparsing; however: Package python3-pyparsing is not configured yet. dpkg: error processing package python3-packaging (--configure): dependency problems - leaving unconfigured Setting up libgdbm-compat4:amd64 (1.19-2) ... Setting up procps (2:3.3.17-4) ... Installing new version of config file /etc/sysctl.conf ... update-alternatives: warning: alternative /usr/bin/w.procps (part of link group w) doesn't exist; removing from list of alternatives update-alternatives: warning: /etc/alternatives/w is dangling; it will be updated with best choice Removing obsolete conffile /etc/sysctl.d/protect-links.conf ... Setting up binutils-x86-64-linux-gnu (2.35.2-2) ... dpkg: dependency problems prevent configuration of python3-importlib-metadata: python3-importlib-metadata depends on python3-zipp (>= 0.5); however: Package python3-zipp is not configured yet. dpkg: error processing package python3-importlib-metadata (--configure): dependency problems - leaving unconfigured Setting up binutils (2.35.2-2) ... Setting up dpkg-dev (1.20.7.1) ... dpkg: dependency problems prevent configuration of python3-pluggy: python3-pluggy depends on python3-importlib-metadata; however: Package python3-importlib-metadata is not configured yet. dpkg: error processing package python3-pluggy (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.28-10) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. Errors were encountered while processing: python3-pkg-resources python3-iniconfig python3-attr python3-py python3-joblib python3-pytest python3-atomicwrites python3-six python3-pygments python3-pyparsing python3-toml python3-more-itertools python3-zipp python3-packaging python3-importlib-metadata python3-pluggy E: Sub-process /usr/bin/dpkg returned an error code (1) (buster-amd64-sbuild)root@sylvester:/home#
pgp20fIzTvvWF.pgp
Description: OpenPGP digital signature
