On Sun, 7 Mar 2021 23:38:40 +0100 Aurelien Jarno <aurel...@aurel32.net> wrote: > On 2021-03-07 22:56, Sven Joachim wrote: > > On 2021-03-05 14:41 +0100, Aurelien Jarno wrote: > > > > > control: notfound -1 libc6/2.28-10 > > > control: found -1 libc6/2.31-9 > > > control: severity -1 grave > > > > > > On 2021-03-04 19:26, Thomas Hahn wrote: > > >> Package: libc6 > > >> Version: 2.28-10 > > >> Severity: normal > > >> X-Debbugs-Cc: thah...@t-online.de > > >> > > >> Dear Maintainer, > > >> > > >> installed buster, then apt upgrade was also fine, > > >> but the following dist-upgrade put the system in a broken state. > > >> > > >> Preparing to unpack .../62-locales_2.31-9_all.deb ... > > >> Unpacking locales (2.31-9) over (2.28-10) ... > > >> Preparing to unpack .../63-openssh-server_1%3a8.4p1-4_amd64.deb ... > > >> Unpacking openssh-server (1:8.4p1-4) over (1:7.9p1-10+deb10u2) ... > > >> Preparing to unpack .../64-libc6_2.31-9_amd64.deb ... > > >> whiptail: /lib/x86_64-linux-gnu/libm.so.6: version `GLIBC_2.29' not > > >> found (required by /lib/x86_64-linux-gnu/libslang.so.2) > > > > > > This seems to show that libslang2 has been wrongly unpacked before > > > libc6. Do you happen to have the beginning of the log? You can find it > > > in /var/log/apt/term.log.* > > > > > >> debconf: whiptail output the above errors, giving up! > > >> Checking for services that may need to be restarted...dpkg: error > > >> processing archive > > >> /tmp/apt-dpkg-install-I51xYx/64-libc6_2.31-9_amd64.deb (--unpack): > > >> new libc6:amd64 package pre-installation script subprocess returned > > >> error exit status 255 > > >> Selecting previously unselected package libcrypt1:amd64. > > >> dpkg: considering deconfiguration of libc6:amd64, which would be broken > > >> by installation of libcrypt1:amd64 ... > > >> dpkg: yes, will deconfigure libc6:amd64 (broken by libcrypt1:amd64) > > >> Preparing to unpack .../65-libcrypt1_1%3a4.4.17-1_amd64.deb ... > > >> De-configuring libc6:amd64 (2.28-10) ... > > >> Unpacking libcrypt1:amd64 (1:4.4.17-1) ... > > >> Errors were encountered while processing: > > >> /tmp/apt-dpkg-install-I51xYx/64-libc6_2.31-9_amd64.deb > > >> Error: Timeout was reached > > >> E: Sub-process /usr/bin/dpkg returned an error code (1) > > > > > > To unbreak your system the best would be to unpack libc6 manually using > > > the following command: > > > dpkg -x /var/cache/apt/libc6_2.31-9_amd64.deb / > > > > No, never do that! This command actually runs "dpkg-deb -x" which, > > unlike "dpkg -i", will silently overwrite symlinks to directories on the > > filesystem with directories contained in the package. This is very bad > > if /lib is a symlink to /usr/lib (the "usrmerge" layout). > > Oh I wasn't aware of that, I have fixed broken systems that way, I > wasn't aware that it doesn't work for usrmerge systems. Yet another > design issue of usrmerge... > > I guess running the usrmerge script again should fix the system.
Negativ. Attached the usbmerge try. Maybe it's time for a disk wipe and new install. On another box I did an upgrade and then installed vim. To my surprise the new libc got pulled in and everything was fine. The apt upgrade and the directly following apt dist-upgrade were fatal.
Log started: 2021-03-08 13:24:01
Selecting previously unselected package libnumber-compare-perl.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 297436 files and directories currently installed.)
Preparing to unpack .../libnumber-compare-perl_0.03-1.1_all.deb ...
Unpacking libnumber-compare-perl (0.03-1.1) ...
Selecting previously unselected package libtext-glob-perl.
Preparing to unpack .../libtext-glob-perl_0.11-1_all.deb ...
Unpacking libtext-glob-perl (0.11-1) ...
Selecting previously unselected package libfile-find-rule-perl.
Preparing to unpack .../libfile-find-rule-perl_0.34-1_all.deb ...
Unpacking libfile-find-rule-perl (0.34-1) ...
Setting up initramfs-tools (0.139) ...
update-initramfs: deferring update (trigger activated)
Setting up libtext-glob-perl (0.11-1) ...
Setting up libnumber-compare-perl (0.03-1.1) ...
Setting up libfile-find-rule-perl (0.34-1) ...
Setting up usrmerge (24) ...
[1;66r[4l)0[?25l[?1c[m[37m[40m[1;66r[H[J[1;1H[1m[37m[44m
[2;1H
[3;1H
[4;1H
[5;1H
[6;1H
[7;1H
[8;1H
[9;1H
[10;1H
[11;1H
[12;1H
[13;1H
[14;1H
[15;1H
[16;1H
[17;1H
[18;1H
[19;1H
[20;1H
[21;1H
[22;1H
[23;1H
[24;1H
[25;1H
[26;1H
[27;1H
[28;1H
[29;1H
[30;1H
[31;1H
[32;1H
[33;1H
[34;1H
[35;1H
[36;1H
[37;1H
[38;1H
[39;1H
[40;1H
[41;1H
[42;1H
[43;1H
[44;1H
[45;1H
[46;1H
[47;1H
[48;1H
[49;1H
[50;1H
[51;1H
[52;1H
[53;1H
[54;1H
[55;1H
[56;1H
[57;1H
[58;1H
[59;1H
[60;1H
[61;1H
[62;1H
[63;1H
[64;1H
[65;1H
[66;1H
[66;239H [4h
[4l[1;1H[m[37m[44mPackage
configuration[28;27H[30m[47m┌─────────────────────────────────────────────────────────────────────────┤
[31mAutomatic conversion to merged /usr[30m
├──────────────────────────────────────────────────────────────────────────┐[29;27H│
│[1m[37m[40m [30;27H[m[30m[47m│ The usrmerge
package will automatically convert the system to the merged /usr directory
scheme, in which the /{bin,sbin,lib}/ directories are symlinked to their
counterparts in /usr/. │[1m[37m[40m [31;27H[m[30m[47m│
│[1m[37m[40m [32;27H[m[30m[47m│ There is no automatic method
to restore the precedent configuration, so there is no going back once the
conversion has been started.
│[1m[37m[40m [33;27H[m[30m[47m│
│[1m[37m[40m [34;27H[m[30m[47m│ Do you want to convert this system to
the merged /usr directories scheme?
│[1m[37m[40m [35;27H[m[30m[47m│
│[1m[37m[40m [36;27H[m[30m[47m│
[37m[41m<Yes>[30m[47m
<No>
│[1m[37m[40m [37;27H[m[30m[47m│
│[1m[37m[40m
[38;27H[m[30m[47m└──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘[1m[37m[40m
[39;28H
[36;86H[?25h[?0c[66;1H[m[37m[40m[m[39;49m
[K
FATAL ERROR:
Both /lib/lsb/init-functions.d/99-plymouth and
/usr/lib/lsb/init-functions.d/99-plymouth exist.
You can try correcting the errors reported and running again
/usr/lib/usrmerge/convert-usrmerge until it will complete without errors.
Do not install or update other Debian packages until the program
has been run successfully.
[1mdpkg:[0m error processing package usrmerge (--configure):
installed usrmerge package post-installation script subprocess returned error
exit status 1
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for initramfs-tools (0.139) ...
update-initramfs: Generating /boot/initrd.img-5.10.0-4-amd64
W: missing /lib/modules/5.10.0-4-amd64
W: Ensure all necessary drivers are built into the linux image!
depmod: ERROR: could not open directory /lib/modules/5.10.0-4-amd64: No such
file or directory
depmod: FATAL: could not search modules: No such file or directory
cat: /var/tmp/mkinitramfs_NcLuXr/lib/modules/5.10.0-4-amd64/modules.builtin: No
such file or directory
find: ‘/var/tmp/mkinitramfs_NcLuXr/lib/modules/5.10.0-4-amd64/kernel’: No such
file or directory
W: Can't find modules.builtin.modinfo (for locating built-in drivers' firmware,
supported in Linux >=5.2)
/usr/share/initramfs-tools/hooks/cryptroot: 18: .: cannot open
/lib/cryptsetup/functions: No such file
E: /usr/share/initramfs-tools/hooks/cryptroot failed with return 2.
update-initramfs: failed for /boot/initrd.img-5.10.0-4-amd64 with 2.
[1mdpkg:[0m error processing package initramfs-tools (--configure):
installed initramfs-tools package post-installation script subprocess returned
error exit status 2
Errors were encountered while processing:
usrmerge
initramfs-tools
Log ended: 2021-03-08 13:24:07
