Your message dated Sun, 27 Dec 2020 10:33:38 +0000
with message-id <e1kttmo-0007kc...@fasolo.debian.org>
and subject line Bug#978255: fixed in glymur 0.9.2-2
has caused the Debian Bug report #978255,
regarding glymur: FTBFS: dh_auto_test: error: pybuild --test -i python{version}
-p 3.9 returned exit code 13
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
978255: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=978255
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Source: glymur
Version: 0.9.2-1
Severity: serious
Justification: FTBFS on amd64
Tags: bullseye sid ftbfs
Usertags: ftbfs-20201226 ftbfs-bullseye
Hi,
During a rebuild of all packages in sid, your package failed to build
on amd64.
Relevant part (hopefully):
> make[1]: Entering directory '/<<PKGBUILDDIR>>'
> PYBUILD_SYSTEM=custom \
> PYBUILD_TEST_ARGS="env PYTHONPATH={build_dir} python{version} -m unittest
> discover -v" \
> dh_auto_test
> I: pybuild base:232: env
> PYTHONPATH=/<<PKGBUILDDIR>>/.pybuild/cpython3_3.9/build python3.9 -m unittest
> discover -v
> test_info_callback_on_write (tests.test_callbacks.TestSuite)
> SCENARIO: write to a JP2 file while in verbose mode ... ok
> test_info_callback_on_write_backwards_compatibility
> (tests.test_callbacks.TestSuite)
> SCENARIO: write to a J2K file while in verbose mode ... ok
> test_info_callbacks_on_read (tests.test_callbacks.TestSuite)
> SCENARIO: the verbose attribute is set to True ... ok
> test_NR_ENC_ElephantDream_4K_tif_21_encode (tests.test_cinema.WriteCinema)
> SCENARIO: create JP2 file with cinema4k profile ... ok
> test_NR_ENC_X_6_2K_24_FULL_CBR_CIRCLE_000_tif_17_encode
> (tests.test_cinema.WriteCinema)
> SCENARIO: create JP2 file with cinema2k profile at 24 fps ... ok
> test_NR_ENC_X_6_2K_24_FULL_CBR_CIRCLE_000_tif_20_encode
> (tests.test_cinema.WriteCinema)
> SCENARIO: create JP2 file with cinema2k profile at 48 fps ... ok
> test_cinema2K_bad_frame_rate (tests.test_cinema.WriteCinema)
> SCENARIO: The cinema2k frame rate is not either 24 or 48. ... ok
> test_reserved_marker_segment (tests.test_codestream.TestCodestream)
> SCENARIO: Rewrite a J2K file to include a marker segment with a ... ok
> test_siz_segment_ssiz_unsigned (tests.test_codestream.TestCodestream)
> ssiz attribute to be removed in future release ... ok
> test_siz (tests.test_codestream.TestCodestreamRepr)
> Test SIZ segment repr ... ok
> test_soc (tests.test_codestream.TestCodestreamRepr)
> Test SOC segment repr ... ok
> test_crg_segment (tests.test_codestream.TestSuite)
> Verify parsing of the CRG segment ... ok
> test_plt_segment (tests.test_codestream.TestSuite)
> Verify parsing of the PLT segment ... ok
> test_ppm_segment (tests.test_codestream.TestSuite)
> Verify parsing of the PPM segment ... ok
> test_ppt_segment (tests.test_codestream.TestSuite)
> Verify parsing of the PPT segment ... ok
> test_rgn_segment (tests.test_codestream.TestSuite)
> Verify parsing of the RGN segment ... ok
> test_tlm_segment (tests.test_codestream.TestSuite)
> Verify parsing of the TLM segment. ... ok
> test_bad_approx_jp2_field
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> JP2 has requirements for approx field ... ok
> test_bad_method_printing
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> SCENARIO: An ICC profile is both too short and has an invalid method ... ok
> test_colr_with_bad_color
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> SCENARIO: A colr box has an invalid colorspace. ... ok
> test_colr_with_out_enum_cspace
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> must supply an enumerated colorspace when writing ... ok
> test_default_colr
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> basic colr instantiation ... ok
> test_icc_profile
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> basic colr box with ICC profile ... ok
> test_missing_colr_box
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> jp2h must have a colr box ... ok
> test_write_colr_with_bad_method
> (tests.test_colour_specification_box.TestColourSpecificationBox)
> SCENARIO: A colr box has an invalid method value. ... ok
> test_bad_rendering_intent (tests.test_colour_specification_box.TestSuite)
> The rendering intent is not in the range 0-4. ... ok
> test_icc_profile (tests.test_colour_specification_box.TestSuite)
> SCENARIO: The ColourDefinitionBox has an ICC profile. ... ok
> test_version4 (tests.test_colour_specification_box.TestSuite)
> ICC profile is version 4 ... ok
> test_config_dir_on_windows (tests.test_config.TestSuite)
> SCENARIO: the XDG_CONFIG_HOME environment variable is not present, the ... ok
> test_not_via_ctypes (tests.test_config.TestSuite)
> SCENARIO: the platform is not anaconda and not MacPorts. The ctypes ... ok
> test_config_dir_but_no_config_file (tests.test_config.TestSuiteConfigFile)
> SCENARIO: A config directory is specified via the environment ... ok
> test_config_file_in_current_directory (tests.test_config.TestSuiteConfigFile)
> SCENARIO: A configuration file exists in the current directory. ... skipped
> 'Difficult to run on Linux unless Anaconda, GH#496'
> test_config_file_via_environ (tests.test_config.TestSuiteConfigFile)
> SCENARIO: Specify the configuration file via an environment variable. ... ok
> test_config_file_without_library_section
> (tests.test_config.TestSuiteConfigFile)
> SCENARIO: A config directory is specified via the environment ... ok
> test_bad_deprecated_print_option (tests.test_config.TestSuiteOptions)
> Verify exception when a bad option is given to old set_printoption ... ok
> test_bad_reset (tests.test_config.TestSuiteOptions)
> Verify exception when a bad option is given to reset ... ok
> test_reset_single_option (tests.test_config.TestSuiteOptions)
> Verify a single option can be reset. ... ok
> test_anaconda_on_mac (tests.test_config.TestSuitePathToLibrary)
> SCENARIO: the platform is Anaconda on mac. ... ok
> test_macports (tests.test_config.TestSuitePathToLibrary)
> SCENARIO: the platform is MacPorts. ... ok
> test_via_ctypes (tests.test_config.TestSuitePathToLibrary)
> SCENARIO: the platform is not anaconda and not MacPorts. The ctypes ... ok
> test_windows_path (tests.test_config.TestSuitePathToLibrary)
> SCENARIO: the platform is Anaconda on windows, even though we are not ... ok
> test_append_allowable_boxes (tests.test_jp2box.TestAppend)
> Only XML boxes are allowed to be appended. ... ok
> test_append_xml (tests.test_jp2box.TestAppend)
> Should be able to append an XML box. ... ok
> test_length_field_is_zero (tests.test_jp2box.TestAppend)
> L=0 (length field in box header) is handled. ... ok
> test_only_jp2_allowed_to_append (tests.test_jp2box.TestAppend)
> Only JP2 files are allowed to be appended. ... ok
> test_bad_grey_alpha (tests.test_jp2box.TestChannelDefinition)
> A greyscale image with alpha layer must specify a color channel ... ok
> test_bad_rgba (tests.test_jp2box.TestChannelDefinition)
> R, G, and B must be specified. ... ok
> test_cdef_no_inputs (tests.test_jp2box.TestChannelDefinition)
> channel_type and association are required inputs. ... ok
> test_grey (tests.test_jp2box.TestChannelDefinition)
> Just regular greyscale. ... ok
> test_grey_alpha (tests.test_jp2box.TestChannelDefinition)
> Just regular greyscale plus alpha. ... ok
> test_not_in_jp2h (tests.test_jp2box.TestChannelDefinition)
> need cdef in jp2h ... ok
> test_only_one_cdef_in_jp2h (tests.test_jp2box.TestChannelDefinition)
> There can only be one channel definition box in the jp2 header. ... ok
> test_rgb (tests.test_jp2box.TestChannelDefinition)
> Just regular RGB, but don't supply the optional index. ... ok
> test_rgb_with_index (tests.test_jp2box.TestChannelDefinition)
> Just regular RGB. ... ok
> test_rgba (tests.test_jp2box.TestChannelDefinition)
> Just regular RGBA. ... ok
> test_basic_url (tests.test_jp2box.TestDataEntryURL)
> Just your most basic URL box. ... ok
> test_null_termination (tests.test_jp2box.TestDataEntryURL)
> I.9.3.2 specifies that location field must be null terminated. ... ok
> test_wrap_greyscale (tests.test_jp2box.TestDataEntryURL)
> A single component should be wrapped as GREYSCALE. ... ok
> test_bad_brand_on_parse (tests.test_jp2box.TestFileTypeBox)
> SCENARIO: The JP2 file file type box does not contain a valid brand. ... ok
> test_brand_unknown (tests.test_jp2box.TestFileTypeBox)
> A ftyp box brand must be 'jp2 ' or 'jpx '. ... ok
> test_cl_entry_not_utf8 (tests.test_jp2box.TestFileTypeBox)
> A ftyp box cl list entry must be utf-8 decodable. ... ok
> test_cl_entry_unknown (tests.test_jp2box.TestFileTypeBox)
> A ftyp box cl list can only contain 'jp2 ', 'jpx ', or 'jpxb'. ... ok
> test_codestream_main_header_offset (tests.test_jp2box.TestJp2Boxes)
> main_header_offset is an attribute of the ContiguousCodesStream box ... ok
> test_default_ccodestreambox (tests.test_jp2box.TestJp2Boxes)
> Raw instantiation should not produce a main_header. ... ok
> test_default_ftyp (tests.test_jp2box.TestJp2Boxes)
> Should be able to instantiate a FileTypeBox ... ok
> test_default_ihdr (tests.test_jp2box.TestJp2Boxes)
> Should be able to instantiate an image header box. ... ok
> test_default_jp2headerbox (tests.test_jp2box.TestJp2Boxes)
> Should be able to set jp2h boxes. ... ok
> test_default_jp2k (tests.test_jp2box.TestJp2Boxes)
> Should be able to instantiate a JPEG2000SignatureBox ... ok
> test_no_ihdr_box (tests.test_jp2box.TestJp2Boxes)
> SCENARIO: The JP2/IHDR box cannot be parsed. ... ok
> test_no_jp2c_box (tests.test_jp2box.TestJp2Boxes)
> SCENARIO: The JP2/JP2C box cannot be parsed. ... ok
> test_signed_components (tests.test_jp2box.TestPaletteBox)
> Palettes with signed components are not supported. ... ok
> test_writing_with_different_bitdepths (tests.test_jp2box.TestPaletteBox)
> Bitdepths must be the same when writing. ... ok
> test_association_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on asoc box. ... ok
> test_bpcc (tests.test_jp2box.TestRepr)
> Should be able to instantiate a bpcc box ... ok
> test_channeldefinition_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on cdef box. ... ok
> test_codestreamheader_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on jpch box. ... ok
> test_colourspecification_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on colr box. ... ok
> test_componentmapping_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on cmap box. ... ok
> test_compositinglayerheader_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on jplh box. ... ok
> test_contiguous_codestream_box (tests.test_jp2box.TestRepr)
> Verify contiguous codestream box repr method. ... ok
> test_data_entry_url_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on data entry url box. ... ok
> test_default_cgrp (tests.test_jp2box.TestRepr)
> Should be able to instantiate a color group box ... ok
> test_default_ftyp (tests.test_jp2box.TestRepr)
> Should be able to instantiate a FileTypeBox ... ok
> test_default_jp2k (tests.test_jp2box.TestRepr)
> Should be able to eval a JPEG2000SignatureBox ... ok
> test_dref (tests.test_jp2box.TestRepr)
> Should be able to instantiate a data reference box ... ok
> test_flst (tests.test_jp2box.TestRepr)
> Should be able to instantiate a fragment list box ... ok
> test_free (tests.test_jp2box.TestRepr)
> Should be able to instantiate a free box ... ok
> test_ftbl (tests.test_jp2box.TestRepr)
> Should be able to instantiate a fragment table box ... ok
> test_imageheader_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on jhdr box. ... ok
> test_jp2header_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on ihdr box. ... ok
> test_label_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on label box. ... ok
> test_nlst (tests.test_jp2box.TestRepr)
> Should be able to instantiate a number list box ... ok
> test_palette_box (tests.test_jp2box.TestRepr)
> Verify Palette box repr. ... ok
> test_readerrequirements_box (tests.test_jp2box.TestRepr)
> Verify rreq repr method. ... ok
> test_resolution_boxes (tests.test_jp2box.TestRepr)
> Verify __repr__ method on resolution boxes. ... ok
> test_unknown (tests.test_jp2box.TestRepr)
> Should be able to instantiate an unknown box ... ok
> test_uuid_box_generic (tests.test_jp2box.TestRepr)
> Verify uuid repr method. ... ok
> test_uuid_box_xmp (tests.test_jp2box.TestRepr)
> Verify uuid repr method for XMP UUID box. ... ok
> test_uuidinfo_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on uinf box. ... ok
> test_uuidlist_box (tests.test_jp2box.TestRepr)
> Verify __repr__ method on ulst box. ... ok
> test_xml_box (tests.test_jp2box.TestRepr)
> Verify xml box repr. ... ok
> test_default_layout_with_boxes (tests.test_jp2box.TestWrap)
> basic test for rewrapping a jp2 file, boxes specified ... ok
> test_empty_jp2h (tests.test_jp2box.TestWrap)
> JP2H box list cannot be empty. ... ok
> test_first_boxes_jp_and_ftyp (tests.test_jp2box.TestWrap)
> first two boxes must be jP followed by ftyp ... ok
> test_full_blown_jpx (tests.test_jp2box.TestWrap)
> Rewrap a jpx file. ... ok
> test_ihdr_not_first_in_jp2h (tests.test_jp2box.TestWrap)
> The specification says that ihdr must be the first box in jp2h. ... ok
> test_jp2h_not_preceeding_jp2c (tests.test_jp2box.TestWrap)
> jp2h must precede jp2c ... ok
> test_jpx_to_jp2 (tests.test_jp2box.TestWrap)
> basic test for rewrapping a jpx file ... ok
> test_missing_codestream (tests.test_jp2box.TestWrap)
> Need a codestream box in order to call wrap method. ... ok
> test_pclr_not_in_jp2h (tests.test_jp2box.TestWrap)
> A palette box must reside in a JP2 header box. ... ok
> test_wrap (tests.test_jp2box.TestWrap)
> basic test for rewrapping a j2c file, no specified boxes ... ok
> test_wrap_compatibility_not_jp2 (tests.test_jp2box.TestWrap)
> File type compatibility must contain jp2 ... ok
> test_wrap_jp2 (tests.test_jp2box.TestWrap)
> basic test for rewrapping a jp2 file, no specified boxes ... ok
> test_wrap_jp2_Lone (tests.test_jp2box.TestWrap)
> Wrap jp2 with jp2c box length is 1, implies Q field ... ok
> test_wrap_jp2_Lzero (tests.test_jp2box.TestWrap)
> Wrap jp2 with jp2c box length is zero ... ok
> test_wrap_jpx_to_jp2_with_correctly_specified_jp2c
> (tests.test_jp2box.TestWrap)
> Accept A JPX file rewrapped with good jp2c. ... ok
> test_wrap_jpx_to_jp2_with_incorrect_jp2c_offset (tests.test_jp2box.TestWrap)
> Reject A JPX file rewrapped with bad jp2c offset. ... ok
> test_wrap_jpx_to_jp2_with_unadorned_jpch (tests.test_jp2box.TestWrap)
> A JPX file rewrapped with plain jpch is not allowed. ... ok
> __init__ (glymur.jp2box.ImageHeaderBox)
> Doctest: glymur.jp2box.ImageHeaderBox.__init__ ... ok
> test_data_reference_requires_dtbl (tests.test_jp2box_jpx.TestJPX)
> The existance of data reference box requires a ftbl box as well. ... ok
> test_dtbl_free (tests.test_jp2box_jpx.TestJPX)
> Verify that we can interpret Data Reference and Free boxes. ... ok
> test_flst_lengths_not_positive (tests.test_jp2box_jpx.TestJPX)
> A fragment list box lengths must be positive. ... ok
> test_flst_lens_not_the_same (tests.test_jp2box_jpx.TestJPX)
> SCENARIO: A FramentListBox is passed parameters with inconsistent ... ok
> test_flst_offsets_not_positive (tests.test_jp2box_jpx.TestJPX)
> A fragment list box offsets must be positive. ... ok
> test_ftbl (tests.test_jp2box_jpx.TestJPX)
> Verify that we can interpret Fragment Table boxes. ... ok
> test_ftbl_boxes_empty (tests.test_jp2box_jpx.TestJPX)
> A fragment table box must have at least one child box. ... ok
> test_ftbl_child_not_flst (tests.test_jp2box_jpx.TestJPX)
> A fragment table box can only contain a fragment list. ... ok
> test_nlst (tests.test_jp2box_jpx.TestJPX)
> Verify that we can handle a number list box. ... ok
> test_reader_requirements_box (tests.test_jp2box_jpx.TestJPX)
> SCENARIO: A JPX file with a valid reader requirements box is ... ok
> test_reader_requirements_box_writing (tests.test_jp2box_jpx.TestJPX)
> SCENARIO: Write a JPX box out to file. The box does not have a write ... ok
> test_rreq3 (tests.test_jp2box_jpx.TestJPX)
> SCENARIO: A JPX file is encountered with an RREQ box with an ... ok
> test_association_label_box (tests.test_jp2box_jpx.TestJPXWrap)
> Wrap JP2 to JPX with asoc, label, and nlst boxes ... ok
> test_cgrp (tests.test_jp2box_jpx.TestJPXWrap)
> Write a color group box. ... ok
> test_cgrp_neg (tests.test_jp2box_jpx.TestJPXWrap)
> Can't write a cgrp with anything but colr sub boxes ... ok
> test_data_reference_in_subbox (tests.test_jp2box_jpx.TestJPXWrap)
> Data reference boxes cannot be inside a superbox . ... ok
> test_deurl_child_of_dtbl (tests.test_jp2box_jpx.TestJPXWrap)
> Data reference boxes can only contain data entry url boxes. ... ok
> test_empty_data_reference (tests.test_jp2box_jpx.TestJPXWrap)
> Empty data reference boxes can be created, but not written. ... ok
> test_ftbl (tests.test_jp2box_jpx.TestJPXWrap)
> Write a fragment table box. ... ok
> test_jp2_to_jpx_sans_jp2_compatibility (tests.test_jp2box_jpx.TestJPXWrap)
> jp2 wrapped to jpx not including jp2 compatibility is wrong. ... ok
> test_jp2_to_jpx_sans_jpx_brand (tests.test_jp2box_jpx.TestJPXWrap)
> Verify error when jp2 wrapped to jpx does not include jpx brand. ... ok
> test_jp2_with_jpx_box (tests.test_jp2box_jpx.TestJPXWrap)
> If the brand is jp2, then no jpx boxes are allowed. ... ok
> test_jpch_jplh (tests.test_jp2box_jpx.TestJPXWrap)
> Write a codestream header, compositing layer header box. ... ok
> test_jpx_ftbl_no_codestream (tests.test_jp2box_jpx.TestJPXWrap)
> SCENARIO: Write a jpx file with no codestream. ... ok
> test_jpxb_compatibility (tests.test_jp2box_jpx.TestJPXWrap)
> Wrap JP2 to JPX, state jpxb compatibility ... ok
> test_label_neg (tests.test_jp2box_jpx.TestJPXWrap)
> Can't write a label box embedded in any old box. ... ok
> test_lbl_at_top_level (tests.test_jp2box_jpx.TestJPXWrap)
> Label boxes can only be inside a asoc box . ... ok
> test_only_one_data_reference (tests.test_jp2box_jpx.TestJPXWrap)
> Data reference boxes cannot be inside a superbox . ... ok
> test__printing__geotiff_uuid__xml_sidecar (tests.test_jp2box_uuid.TestSuite)
> SCENARIO: Print a geotiff UUID with XML sidecar file ... ok
> test_append_xmp_uuid (tests.test_jp2box_uuid.TestSuite)
> SCENARIO: Append an XMP UUID box to an existing JP2 file. ... ok
> test_bad_exif_tag (tests.test_jp2box_uuid.TestSuite)
> Corrupt the Exif IFD with an invalid tag should produce a warning. ... ok
> test_exif (tests.test_jp2box_uuid.TestSuite)
> Verify read of both big and little endian Exif IFDs. ... ok
> test_print_bad_geotiff (tests.test_jp2box_uuid.TestSuite)
> SCENARIO: A GeoTIFF UUID is corrupt. ... ok
> test_printing_geotiff_uuid (tests.test_jp2box_uuid.TestSuiteHiRISE)
> SCENARIO: Print a geotiff UUID. ... skipped 'Could not load GDAL'
> test_tags (tests.test_jp2box_uuid.TestSuiteHiRISE) ... ok
> test_basic_xml (tests.test_jp2box_xml.TestXML)
> SCENARIO: Write a JP2 file with an xml box. ... ok
> test_invalid_xml_box (tests.test_jp2box_xml.TestXML)
> SCENARIO: A JP2 file is encountered with a bad XML box. ... ok
> test_negative_file_and_xml (tests.test_jp2box_xml.TestXML)
> The XML should come from only one source. ... ok
> test_recover_from_bad_xml (tests.test_jp2box_xml.TestXML)
> SCENARIO: A JP2 file is encountered with a bad XML payload, but this ... ok
> test_utf8_xml_from_xml_file (tests.test_jp2box_xml.TestXML)
> XMLBox from an XML file with encoding declaration. ... ok
> test_xml_box_with_encoding_declaration (tests.test_jp2box_xml.TestXML)
> SCENARIO: A JP2 file is encountered with an XML box having an encoding ... ok
> test_xml_from_file_as_path (tests.test_jp2box_xml.TestXML)
> SCENARIO: Create an xml box by pointing at an XML file via a pathlib ... ok
> test_xml_from_file_as_string (tests.test_jp2box_xml.TestXML)
> SCENARIO: Create an xml box by pointing at an XML file via string ... ok
> test_nbits_gt_16 (tests.test_jp2k.TestComponent)
> SCENARIO: One of the layers has more than 16 bits per sample. ... ok
> test_nbits_lt_16_gt_8 (tests.test_jp2k.TestComponent)
> SCENARIO: A layer has between 9 and 16 bits per sample. ... ok
> test_nbits_lt_9 (tests.test_jp2k.TestComponent)
> SCENARIO: A layer has less than 9 bits per sample ... ok
> test_64bit_xl_field (tests.test_jp2k.TestJp2k)
> SCENARIO: A JP2 file is encountered with a jp2c file with the XL field ... ok
> test_bad_tile_part_pointer (tests.test_jp2k.TestJp2k)
> SCENARIO: A bad SOT marker segment is encountered (Psot value pointing ... ok
> test_basic_icc_profile (tests.test_jp2k.TestJp2k)
> basic ICC profile ... ok
> test_basic_j2k (tests.test_jp2k.TestJp2k)
> Just a very basic test that reading a J2K file does not error out. ... ok
> test_basic_jp2 (tests.test_jp2k.TestJp2k)
> Just a very basic test that reading a JP2 file does not error out. ... ok
> test_codestream (tests.test_jp2k.TestJp2k)
> Verify the markers and segments of a JP2 file codestream. ... ok
> test_default_layer (tests.test_jp2k.TestJp2k)
> SCENARIO: Check the default layer property. ... ok
> test_default_verbosity (tests.test_jp2k.TestJp2k)
> SCENARIO: Check the default verbosity property. ... ok
> test_different_layers (tests.test_jp2k.TestJp2k)
> SCENARIO: Set the layer property to specify the 2nd layer. ... ok
> test_empty_box_with_j2k (tests.test_jp2k.TestJp2k)
> Verify that the list of boxes in a J2C/J2K file is present, but ... ok
> test_file_not_present (tests.test_jp2k.TestJp2k)
> Should error out if reading from a file that does not exist ... ok
> test_invalid_layers (tests.test_jp2k.TestJp2k)
> SCENARIO: an improper layer value is set ... ok
> test_irreversible (tests.test_jp2k.TestJp2k)
> SCENARIO: Write a J2K file with the irreversible transform. ... ok
> test_j2k_box (tests.test_jp2k.TestJp2k)
> A J2K/J2C file must not have any boxes. ... ok
> test_jp2_boxes (tests.test_jp2k.TestJp2k)
> Verify the boxes of a JP2 file. Basic jp2 test. ... ok
> test_jpx_mult_codestreams_jp2_brand (tests.test_jp2k.TestJp2k)
> Read JPX codestream when jp2-compatible. ... ok
> test_length_field_is_zero (tests.test_jp2k.TestJp2k)
> SCENARIO: A JP2 file has in its last box and L field with value 0. ... ok
> test_no_cxform_cmap (tests.test_jp2k.TestJp2k)
> SCENARIO: Write an RGB image as a JP2 file, but with a colr box ... ok
> test_no_cxform_pclr_jpx (tests.test_jp2k.TestJp2k)
> Indices for pclr jpxfile still usable if no color transform specified ... ok
> test_not_jpeg2000 (tests.test_jp2k.TestJp2k)
> SCENARIO: The Jp2k constructor is passed a file that is not JPEG 2000. ... ok
> test_pathlib (tests.test_jp2k.TestJp2k)
> SCENARIO: Provide a pathlib.Path instead of a string for the filename. ... ok
> test_psot_is_zero (tests.test_jp2k.TestJp2k)
> SCENARIO: An SOT marker segment is encountered with a Psot value of 0. ... ok
> test_read_bands (tests.test_jp2k.TestJp2k)
> SCENARIO: The read_bands method really should only be used on images ... ok
> test_read_bands_unequal_subsampling (tests.test_jp2k.TestJp2k)
> SCENARIO: The read_bands method is used on an image with unequal ... ok
> test_read_bands_without_openjp2 (tests.test_jp2k.TestJp2k)
> Don't have openjp2 library? Must error out. ... ok
> test_read_differing_subsamples (tests.test_jp2k.TestJp2k)
> SCENARIO: Attempt to read a file where the components have differing ... ok
> test_read_without_openjpeg (tests.test_jp2k.TestJp2k)
> Don't have openjpeg or openjp2 library? Must error out. ... ok
> test_rlevel_max_backwards_compatibility (tests.test_jp2k.TestJp2k)
> Verify that rlevel=-1 gets us the lowest resolution image ... ok
> test_rlevel_too_high (tests.test_jp2k.TestJp2k)
> Should error out appropriately if reduce level too high ... ok
> test_shape_3_channel_j2k (tests.test_jp2k.TestJp2k)
> verify shape attribute for J2K file ... ok
> test_shape_jp2 (tests.test_jp2k.TestJp2k)
> verify shape attribute for JP2 file ... ok
> test_shape_jpx_jp2 (tests.test_jp2k.TestJp2k)
> verify shape attribute for JPX file with JP2 compatibility ... ok
> test_thread_support (tests.test_jp2k.TestJp2k)
> SCENARIO: Set a non-default thread support value. ... ok
> test_thread_support_not_compiled_into_library (tests.test_jp2k.TestJp2k)
> SCENARIO: Set number of threads on openjpeg >= 2.2.0, but openjpeg ... ok
> test_thread_support_on_openjpeg_lt_220 (tests.test_jp2k.TestJp2k)
> SCENARIO: Set number of threads on openjpeg < 2.2.0 ... ok
> test_uinf_ulst_url_boxes (tests.test_jp2k.TestJp2k)
> SCENARIO: A JP2 file with UINF, ULST, and URL boxes is encountered. ... ok
> test_xml_with_trailing_nulls (tests.test_jp2k.TestJp2k)
> SCENARIO: An xml box is encountered with null chars trailing the valid ... ok
> test_xmp_attribute (tests.test_jp2k.TestJp2k)
> Verify the XMP packet in the shipping example file can be read. ... ok
> test_zero_length_reserved_segment (tests.test_jp2k.TestJp2k)
> SCENARIO: There is a zero-length reserved marker segment just before ... ok
> test_asoc_label_box (tests.test_jp2k.TestJp2k_2_0)
> Test asoc and label box ... ok
> test_bad_area_parameter (tests.test_jp2k.TestJp2k_2_0)
> Should error out appropriately if given a bad area parameter. ... ok
> test_grey_with_extra_component (tests.test_jp2k.TestJp2k_2_0)
> version 2.0 cannot write gray + extra ... ok
> test_ignore_pclr_cmap_cdef_on_old_read (tests.test_jp2k.TestJp2k_2_0)
> The old "read" interface allowed for passing ignore_pclr_cmap_cdef ... ok
> test_openjpeg_library_error (tests.test_jp2k.TestJp2k_2_0)
> SCENARIO: A zero subsampling factor should produce as error by the ... ok
> test_rgb_with_extra_component (tests.test_jp2k.TestJp2k_2_0)
> v2.0+ should be able to write extra components ... ok
> test_unrecognized_jp2_clrspace (tests.test_jp2k.TestJp2k_2_0)
> We only allow RGB and GRAYSCALE. Should error out with others ... ok
> test_2d_rgb (tests.test_jp2k.TestJp2k_write)
> RGB must have at least 3 components. ... ok
> test_NR_ENC_Bretagne1_ppm_1_encode (tests.test_jp2k.TestJp2k_write)
> SCENARIO: Create a JP2 image with three compression ratios. ... ok
> test_NR_ENC_Bretagne1_ppm_2_encode (tests.test_jp2k.TestJp2k_write)
> SCENARIO: Three peak signal-to-noise ratio values, two resolutions are ... ok
> test_NR_ENC_Bretagne1_ppm_3_encode (tests.test_jp2k.TestJp2k_write)
> SCENARIO: Three peak signal to noise rations are provided, along with ... ok
> test_NR_ENC_Bretagne2_ppm_4_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Bretagne2_ppm_5_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Bretagne2_ppm_6_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Bretagne2_ppm_7_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Bretagne2_ppm_8_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Cevennes1_bmp_9_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Cevennes2_ppm_10_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_Rome_bmp_11_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_NR_ENC_issue141_rawl_23_encode (tests.test_jp2k.TestJp2k_write)
> Test irreversible option ... ok
> test_NR_ENC_random_issue_0005_tif_12_encode (tests.test_jp2k.TestJp2k_write)
> Original file tested was ... ok
> test_cblk_size_not_power_of_two (tests.test_jp2k.TestJp2k_write)
> code block sizes should be powers of two. ... ok
> test_cblk_size_precinct_size (tests.test_jp2k.TestJp2k_write)
> code block sizes should never exceed half that of precinct size. ... ok
> test_cblkh_different_than_width (tests.test_jp2k.TestJp2k_write)
> Verify that we can set a code block size where height does not equal ... ok
> test_cinema2K_with_others (tests.test_jp2k.TestJp2k_write)
> Can't specify cinema2k with any other options. ... ok
> test_cinema4K_with_others (tests.test_jp2k.TestJp2k_write)
> Can't specify cinema4k with any other options. ... ok
> test_code_block_dimensions (tests.test_jp2k.TestJp2k_write)
> don't allow extreme codeblock sizes ... ok
> test_colorspace_with_j2k (tests.test_jp2k.TestJp2k_write)
> Specifying a colorspace with J2K does not make sense ... ok
> test_grey_with_two_extra_comps (tests.test_jp2k.TestJp2k_write)
> should be able to write gray + two extra components ... ok
> test_irreversible (tests.test_jp2k.TestJp2k_write)
> Verify that the Irreversible option works ... ok
> test_no_jp2c_box_in_outermost_jp2_list (tests.test_jp2k.TestJp2k_write)
> SCENARIO: A JP2 file is encountered without a JP2C box in the outer- ... ok
> test_null_data (tests.test_jp2k.TestJp2k_write)
> SCENARIO: An image with a dimension with length 0 is provided. ... ok
> test_precinct_size_not_p2 (tests.test_jp2k.TestJp2k_write)
> precinct sizes should be powers of two. ... ok
> test_precinct_size_not_power_of_two (tests.test_jp2k.TestJp2k_write)
> SCENARIO: A precinct size is specified that is not a power of 2. ... ok
> test_precinct_size_too_small (tests.test_jp2k.TestJp2k_write)
> SCENARIO: The first precinct size is less than 2x that of the code ... ok
> test_psnr (tests.test_jp2k.TestJp2k_write)
> SCENARIO: Four peak signal-to-noise ratio values are supplied, the ...
> Matplotlib created a temporary config/cache directory at
> /tmp/matplotlib-q1vs87u1 because the default path
> (/sbuild-nonexistent/.config/matplotlib) is not a writable directory; it is
> highly recommended to set the MPLCONFIGDIR environment variable to a writable
> directory, in particular to speed up the import of Matplotlib and to better
> support multiprocessing.
> ERROR
> test_psnr_non_zero_non_monotonically_decreasing
> (tests.test_jp2k.TestJp2k_write)
> SCENARIO: The PSNR keyword argument is non-monotonically increasing ... ok
> test_psnr_with_cratios (tests.test_jp2k.TestJp2k_write)
> Using psnr with cratios options is not allowed. ... ok
> test_psnr_zero_value_not_last (tests.test_jp2k.TestJp2k_write)
> SCENARIO: The PSNR keyword argument has a zero value, but it is not ... ok
> test_shape_greyscale_jp2 (tests.test_jp2k.TestJp2k_write)
> verify shape attribute for greyscale JP2 file ... ok
> test_shape_single_channel_j2k (tests.test_jp2k.TestJp2k_write)
> verify shape attribute for single channel J2K file ... ok
> test_specify_gray (tests.test_jp2k.TestJp2k_write)
> test gray explicitly specified (that's GRAY, not GREY) ... ok
> test_specify_grey (tests.test_jp2k.TestJp2k_write)
> test grey explicitly specified ... ok
> test_specify_rgb (tests.test_jp2k.TestJp2k_write)
> specify RGB explicitly ... ok
> test_specify_ycc (tests.test_jp2k.TestJp2k_write)
> Should reject YCC ... ok
> test_too_many_dimensions (tests.test_jp2k.TestJp2k_write)
> OpenJP2 only allows 2D or 3D images. ... ok
> test_unsupported_int32 (tests.test_jp2k.TestJp2k_write)
> Should raise a runtime error if trying to write int32 ... ok
> test_unsupported_uint32 (tests.test_jp2k.TestJp2k_write)
> Should raise a runtime error if trying to write uint32 ... ok
> test_write_cprl (tests.test_jp2k.TestJp2k_write)
> Must be able to write a CPRL progression order file ... ok
> test_write_grayscale_with_mct (tests.test_jp2k.TestJp2k_write)
> MCT usage makes no sense for grayscale images. ... ok
> test_write_srgb_without_mct (tests.test_jp2k.TestJp2k_write)
> should be able to write RGB without specifying mct ... ok
> test_write_with_jp2_in_caps (tests.test_jp2k.TestJp2k_write)
> should be able to write with JP2 suffix. ... ok
> test_write_with_version_too_early (tests.test_jp2k.TestJp2k_write)
> Should raise a runtime error if trying to write with version 1.3 ... ok
> test_main_header (tests.test_jp2k.TestParsing)
> verify that the main header isn't loaded during normal parsing ... ok
> test_NR_DEC_p0_04_j2k_85_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_86_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_87_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_88_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_89_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_90_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_91_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_92_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_93_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_94_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_95_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p0_04_j2k_96_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_43_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_45_decode (tests.test_jp2k.TestReadArea)
> Get bottom right ... ok
> test_NR_DEC_p1_04_j2k_46_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_47_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_48_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_49_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_50_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_51_decode (tests.test_jp2k.TestReadArea)
> NR_DEC_p1_04_j2k_51_decode ... ok
> test_NR_DEC_p1_04_j2k_53_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_54_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_55_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_04_j2k_56_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_70_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_71_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_72_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_73_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_74_decode (tests.test_jp2k.TestReadArea) ... ok
> test_NR_DEC_p1_06_j2k_75_decode (tests.test_jp2k.TestReadArea) ... ok
> test_basic_write (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: write image by specifying image data in constructor ... ok
> test_cannot_write_a_band (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write band by specifying slicing. Only ':' is ... ok
> test_cannot_write_a_column (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write column by specifying slicing. Only ':' is ... ok
> test_cannot_write_a_pixel (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write pixel by specifying slicing. Only ':' is ... ok
> test_cannot_write_a_row (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write image row by specifying slicing. Only ':' is ... ok
> test_cannot_write_a_subarray (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write area by specifying slicing. Only ':' is ... ok
> test_cannot_write_with_non_default_single_slice
> (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: Write image using single non-default slices. Only ':' is ... ok
> test_write_ellipsis (tests.test_jp2k.TestSliceProtocolBaseWrite)
> SCENARIO: write image by specifying ellipsis in slice ... ok
> test_ellipsis_band_select (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_ellipsis_full_read (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_ellipsis_row_select (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_integer_index_in_3d (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_reduce_resolution_and_slice_in_third_dimension
> (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_region_rlevel5 (tests.test_jp2k.TestSliceProtocolRead)
> maximim rlevel ... ok
> test_resolution_strides_cannot_differ (tests.test_jp2k.TestSliceProtocolRead)
> ... ok
> test_resolution_strides_must_be_powers_of_two
> (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_retrieve_single_component (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_retrieve_single_pixel (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_retrieve_single_row (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_single_slice (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_slice_in_third_dimension (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_two_ellipsis_and_full_slice (tests.test_jp2k.TestSliceProtocolRead) ...
> ok
> test_two_ellipsis_band_select (tests.test_jp2k.TestSliceProtocolRead) ... ok
> test_two_ellipsis_row_select (tests.test_jp2k.TestSliceProtocolRead) ... ok
> Jp2k (glymur.jp2k)
> Doctest: glymur.jp2k.Jp2k ... ok
> get_codestream (glymur.jp2k.Jp2k)
> Doctest: glymur.jp2k.Jp2k.get_codestream ... ok
> read_bands (glymur.jp2k.Jp2k)
> Doctest: glymur.jp2k.Jp2k.read_bands ... ok
> wrap (glymur.jp2k.Jp2k)
> Doctest: glymur.jp2k.Jp2k.wrap ... ok
> test_default_decoder_parameters (tests.test_openjp2.TestOpenJP2)
> Tests that the structure is clean upon initialization ... ok
> test_default_encoder_parameters (tests.test_openjp2.TestOpenJP2)
> Ensure that the encoder structure is clean upon init. ... ok
> test_get_num_cpus (tests.test_openjp2.TestOpenJP2)
> SCENARIO: Hard to test this. Values will be different across ... ok
> test_no_openjp2_library (tests.test_openjp2.TestOpenJP2)
> SCENARIO: There is no openjp2 library. ... ok
> test_ttd0 (tests.test_openjp2.TestOpenJP2)
> Runs test designated ttd0 in OpenJPEG test suite. ... ok
> test_ttd1 (tests.test_openjp2.TestOpenJP2)
> Runs test designated ttd1 in OpenJPEG test suite. ... ok
> test_ttd2 (tests.test_openjp2.TestOpenJP2)
> Runs test designated ttd2 in OpenJPEG test suite. ... ok
> test_tte0 (tests.test_openjp2.TestOpenJP2)
> SCENARIO: create a J2K file with the following characteristics: ... ok
> test_tte1 (tests.test_openjp2.TestOpenJP2)
> Runs test designated tte1 in OpenJPEG test suite. ... ok
> test_tte2 (tests.test_openjp2.TestOpenJP2)
> Runs test designated tte2 in OpenJPEG test suite. ... ok
> test_tte3 (tests.test_openjp2.TestOpenJP2)
> Runs test designated tte3 in OpenJPEG test suite. ... ok
> test_tte4 (tests.test_openjp2.TestOpenJP2)
> Runs test designated tte4 in OpenJPEG test suite. ... ok
> test_tte5 (tests.test_openjp2.TestOpenJP2)
> Runs test designated tte5 in OpenJPEG test suite. ... ok
> test_decompression_parameters (tests.test_openjp2.TestPrintingOpenjp2)
> printing DecompressionParametersType ... ok
> test_default_compression_parameters (tests.test_openjp2.TestPrintingOpenjp2)
> printing default compression parameters ... ok
> test_progression_order_changes (tests.test_openjp2.TestPrintingOpenjp2)
> printing PocType ... ok
> test_codestream_invalid (tests.test_printing.TestJp2dump)
> Verify dumping with -c 3, not allowd. ... ok
> test_default_component_parameters (tests.test_printing.TestJp2dump)
> printing default image component parameters ... ok
> test_default_image_type (tests.test_printing.TestJp2dump)
> printing default image type ... ok
> test_default_nemo (tests.test_printing.TestJp2dump)
> by default one should get the main header ... ok
> test_image_comp_type (tests.test_printing.TestJp2dump) ... ok
> test_j2k_codestream_0 (tests.test_printing.TestJp2dump)
> -c 0 should print just a single line when used on a codestream. ... ok
> test_j2k_codestream_1 (tests.test_printing.TestJp2dump)
> SCENARIO: The jp2dump executable is used with the "-c 1" switch. ... ok
> test_j2k_codestream_2 (tests.test_printing.TestJp2dump)
> Verify dumping with -c 2, full details. ... ok
> test_jp2_codestream_0 (tests.test_printing.TestJp2dump)
> Verify dumping with -c 0, supressing all codestream details. ... ok
> test_jp2_codestream_1 (tests.test_printing.TestJp2dump)
> Verify dumping with -c 1, print just the header. ... ok
> test_jp2_codestream_2 (tests.test_printing.TestJp2dump)
> Verify dumping with -c 2, print entire jp2 jacket, codestream. ... ok
> test_short (tests.test_printing.TestJp2dump)
> Verify dumping with -s, short option. ... ok
> test_suppress_warnings_until_end (tests.test_printing.TestJp2dump)
> SCENARIO: JP2DUMP with -x option on file with invalid ftyp box. ... ok
> test_suppress_xml (tests.test_printing.TestJp2dump)
> Verify dumping with -x, suppress XML. ... ok
> test_asoc_label_box (tests.test_printing.TestPrinting)
> SCENARIO: A JPX file has both asoc and labl boxes. ... ok
> test_bad_color_specification (tests.test_printing.TestPrinting)
> Invalid channel type should not prevent printing. ... ok
> test_bad_rsiz (tests.test_printing.TestPrinting)
> Should still be able to print if rsiz is bad, issue196 ... ok
> test_bad_wavelet_transform (tests.test_printing.TestPrinting)
> Should still be able to print if wavelet xform is bad, issue195 ... ok
> test_bom (tests.test_printing.TestPrinting)
> Byte order markers are illegal in UTF-8. Issue 185 ... ok
> test_bpcc (tests.test_printing.TestPrinting)
> BPCC boxes are rare :-) ... ok
> test_channel_definition (tests.test_printing.TestPrinting)
> verify printing of cdef box ... ok
> test_cinema_profile (tests.test_printing.TestPrinting)
> Should print Cinema 2K when the profile is 3. ... ok
> test_cme (tests.test_printing.TestPrinting)
> Test printing a CME or comment marker segment. ... ok
> test_coc_segment (tests.test_printing.TestPrinting)
> verify printing of COC segment ... ok
> test_cod_segment (tests.test_printing.TestPrinting)
> verify printing of COD segment ... ok
> test_cod_segment_irreversible (tests.test_printing.TestPrinting)
> Verify printing of irreversible transform ... ok
> test_cod_segment_unknown (tests.test_printing.TestPrinting)
> Verify printing of transform when it's actually unknown ... ok
> test_codestream (tests.test_printing.TestPrinting)
> verify printing of entire codestream ... ok
> test_component_mapping_non_palette (tests.test_printing.TestPrinting)
> verify printing of cmap box where there is no palette ... ok
> test_component_mapping_palette (tests.test_printing.TestPrinting)
> verify printing of cmap box tied to a palette ... ok
> test_crg (tests.test_printing.TestPrinting)
> verify printing of CRG segment ... ok
> test_differing_subsamples (tests.test_printing.TestPrinting)
> verify printing of SIZ with different subsampling... Issue 86. ... ok
> test_dref (tests.test_printing.TestPrinting)
> Verify printing of data reference box. ... ok
> test_empty_dref (tests.test_printing.TestPrinting)
> Verify printing of data reference box with no content. ... ok
> test_eoc_segment (tests.test_printing.TestPrinting)
> verify printing of eoc segment ... ok
> test_exif_uuid (tests.test_printing.TestPrinting)
> SCENARIO: A JP2 file has an Exif UUID box. ... ok
> test_flst (tests.test_printing.TestPrinting)
> Verify printing of fragment list box. ... ok
> test_free (tests.test_printing.TestPrinting)
> Verify printing of Free box. ... ok
> test_ftbl (tests.test_printing.TestPrinting)
> Verify printing of fragment table box. ... ok
> test_full_codestream (tests.test_printing.TestPrinting)
> Verify printing with the full blown codestream ... ok
> test_icc_profile (tests.test_printing.TestPrinting)
> SCENARIO: print a colr box with an ICC profile ... ok
> test_invalid_approximation (tests.test_printing.TestPrinting)
> An invalid approximation value shouldn't cause a printing error. ... ok
> test_invalid_colorspace (tests.test_printing.TestPrinting)
> SCENARIO: An invalid colorspace shouldn't cause an error when ... ok
> test_invalid_pod_segment (tests.test_printing.TestPrinting)
> SCENARIO: A progression order parameter is out of range. ... ok
> test_invalid_progression_order (tests.test_printing.TestPrinting)
> Should still be able to print even if prog order is invalid. ... ok
> test_issue182 (tests.test_printing.TestPrinting)
> SCENARIO: Print a component mapping box. ... ok
> test_issue183 (tests.test_printing.TestPrinting)
> SCENARIO: An ICC profile is present in a ColourSpecificationBox, but ... ok
> test_jpch (tests.test_printing.TestPrinting)
> Verify printing of JPCH box. ... ok
> test_jplh_cgrp (tests.test_printing.TestPrinting)
> Verify printing of compositing layer header box, color group box. ... ok
> test_label_box_short (tests.test_printing.TestPrinting)
> Test the short option for the LabelBox ... ok
> test_less_common_boxes (tests.test_printing.TestPrinting)
> verify uinf, ulst, url, res, resd, resc box printing ... ok
> test_nlst (tests.test_printing.TestPrinting)
> Verify printing of number list box. ... ok
> test_nlst_short (tests.test_printing.TestPrinting) ... ok
> test_non_default_precinct_size (tests.test_printing.TestPrinting) ... ok
> test_old_short_option (tests.test_printing.TestPrinting)
> Verify printing with deprecated set_printoptions "short" ... ok
> test_palette (tests.test_printing.TestPrinting)
> verify printing of pclr box ... ok
> test_plt_segment (tests.test_printing.TestPrinting)
> verify printing of PLT segment ... ok
> test_pod_segment (tests.test_printing.TestPrinting)
> verify printing of POD segment ... ok
> test_ppm_segment (tests.test_printing.TestPrinting)
> verify printing of PPM segment ... ok
> test_ppt_segment (tests.test_printing.TestPrinting)
> verify printing of ppt segment ... ok
> test_precincts (tests.test_printing.TestPrinting)
> SCENARIO: print the first COD segment ... ok
> test_printoptions_bad_argument (tests.test_printing.TestPrinting)
> Verify error when bad parameter to set_printoptions ... ok
> test_qcc_segment (tests.test_printing.TestPrinting)
> verify printing of qcc segment ... ok
> test_qcd_segment_5x3_transform (tests.test_printing.TestPrinting)
> verify printing of qcd segment ... ok
> test_reserved_marker (tests.test_printing.TestPrinting)
> SCENARIO: print a marker segment with a reserver marker value ... ok
> test_rgn (tests.test_printing.TestPrinting)
> verify printing of RGN segment ... ok
> test_rreq (tests.test_printing.TestPrinting)
> verify printing of reader requirements box ... ok
> test_scalar_explicit_quantization_file (tests.test_printing.TestPrinting) ...
> ok
> test_scalar_implicit_quantization_file (tests.test_printing.TestPrinting) ...
> ok
> test_siz_segment (tests.test_printing.TestPrinting)
> verify printing of SIZ segment ... ok
> test_soc_segment (tests.test_printing.TestPrinting)
> verify printing of SOC segment ... ok
> test_sod_segment (tests.test_printing.TestPrinting)
> verify printing of SOD segment ... ok
> test_sop (tests.test_printing.TestPrinting)
> verify printing of SOP segment ... ok
> test_sot_segment (tests.test_printing.TestPrinting)
> verify printing of SOT segment ... ok
> test_suppress_codestream (tests.test_printing.TestPrinting)
> Verify printing with codestream suppressed ... ok
> test_suppress_codestream_old_option (tests.test_printing.TestPrinting)
> Verify printing with codestream suppressed, deprecated ... ok
> test_suppress_xml (tests.test_printing.TestPrinting)
> Verify printing with xml suppressed ... ok
> test_suppress_xml_old_option (tests.test_printing.TestPrinting)
> Verify printing with xml suppressed, deprecated method ... ok
> test_tlm_segment (tests.test_printing.TestPrinting)
> verify printing of TLM segment ... ok
> test_unknown_superbox (tests.test_printing.TestPrinting)
> SCENARIO: An unknown superbox is encountered. ... ok
> test_uuid (tests.test_printing.TestPrinting)
> verify printing of UUID box ... ok
> test_version_info (tests.test_printing.TestPrinting)
> Should be able to print(glymur.version.info) ... ok
> test_xml (tests.test_printing.TestPrinting)
> SCENARIO: JP2 file has an XML box. ... ok
> test_xml_cyrrilic (tests.test_printing.TestPrinting)
> Should be able to print XMLBox with utf-8 encoding (cyrrillic). ... ok
> test_xml_latin1 (tests.test_printing.TestPrinting)
> Should be able to print an XMLBox with utf-8 encoding (latin1). ... ok
> test_xml_no_xml (tests.test_printing.TestPrinting)
> verify printing of XML box when there is no XML ... ok
> test_xml_no_xml_option (tests.test_printing.TestPrinting)
> verify printing of XML box when print.xml option set to false ... ok
> test_xml_short_option (tests.test_printing.TestPrinting)
> verify printing of XML box when print.xml option set to false ... ok
> test_xmp (tests.test_printing.TestPrinting)
> Verify the printing of a UUID/XMP box. ... ok
> test_NR_DEC_issue188_beach_64bitsbox_jp2_41_decode
> (tests.test_warnings.TestSuite)
> SCENARIO: A JP2 file has a box with label 'XML ' instead of 'xml '. ... ok
> test_NR_ENC_X_6_2K_24_FULL_CBR_CIRCLE_000_tif_17_encode
> (tests.test_warnings.TestSuite)
> SCENARIO: Too much data is written as a Cinema2K file. ... ok
> test_NR_gdal_fuzzer_assert_in_opj_j2k_read_SQcd_SQcc_patch_jp2
> (tests.test_warnings.TestSuite)
> validate the QCC component number against Csiz ... ok
> test_NR_gdal_fuzzer_check_comp_dx_dy_jp2_dump (tests.test_warnings.TestSuite)
> Invalid subsampling value. ... ok
> test_NR_gdal_fuzzer_check_number_of_tiles (tests.test_warnings.TestSuite)
> Has an impossible tiling setup. ... ok
> test_NR_gdal_fuzzer_unchecked_numresolutions_dump
> (tests.test_warnings.TestSuite)
> Has an invalid number of resolutions. ... ok
> test_bad_color_space_specification (tests.test_warnings.TestSuite)
> Verify that a warning is issued if the color space method is invalid. ... ok
> test_bad_ftyp_brand (tests.test_warnings.TestSuite)
> SCENARIO: The ftyp box has an invalid brand field. ... ok
> test_bad_ftyp_compatibility_list_item (tests.test_warnings.TestSuite)
> SCENARIO: The ftyp box has an invalid compatibility list item. ... ok
> test_bad_rsiz (tests.test_warnings.TestSuite)
> SCENARIO: The SIZ value parsed from the SIZ segment is invalid. ... ok
> test_bad_tag_datatype (tests.test_warnings.TestSuite)
> SCENARIO: A tag with an unrecognized numeric datatype field is found ... ok
> test_bad_tiff_header_byte_order_indication (tests.test_warnings.TestSuite)
> SCENARIO: An invalid TIFF header byte order marker is encountered ... ok
> test_bad_type (tests.test_warnings.TestSuite)
> Channel types are limited to 0, 1, 2, 65535 ... ok
> test_bad_wavelet_transform (tests.test_warnings.TestSuite)
> Should warn if wavelet transform is bad. Issue195 ... ok
> test_brand_unknown (tests.test_warnings.TestSuite)
> A ftyp box brand must be 'jp2 ' or 'jpx '. ... ok
> test_cl_entry_unknown (tests.test_warnings.TestSuite)
> A ftyp box cl list can only contain 'jp2 ', 'jpx ', or 'jpxb'. ... ok
> test_colr_with_bad_approx (tests.test_warnings.TestSuite)
> SCENARIO: An ColourSpecificationBox is given an invalid approximation ... ok
> test_colr_with_bad_method (tests.test_warnings.TestSuite)
> colr must have a valid method field ... ok
> test_colr_with_cspace_and_icc (tests.test_warnings.TestSuite)
> Colour specification boxes can't have both. ... ok
> test_deprecated_set_get_parseoption (tests.test_warnings.TestSuite)
> Verify deprecated get_parseoptions and set_parseoptions ... ok
> test_deprecated_set_get_printoptions (tests.test_warnings.TestSuite)
> Verify deprecated get_printoptions and set_printoptions ... ok
> test_deurl_child_of_dtbl (tests.test_warnings.TestSuite)
> Data reference boxes can only contain data entry url boxes. ... ok
> test_file_pointer_badly_positioned (tests.test_warnings.TestSuite)
> SCENARIO: A colr box has an impossibly too long box length. Since ... ok
> test_flst_lengths_not_positive (tests.test_warnings.TestSuite)
> A fragment list box lengths must be positive. ... ok
> test_flst_lens_not_the_same (tests.test_warnings.TestSuite)
> A fragment list box items must be the same length. ... ok
> test_flst_offsets_not_positive (tests.test_warnings.TestSuite)
> A fragment list box offsets must be positive. ... ok
> test_invalid_approximation (tests.test_warnings.TestSuite)
> SCENARIO: The colr box has an invalid approximation field. ... ok
> test_invalid_colorspace (tests.test_warnings.TestSuite)
> SCENARIO: A colr box has an invalid colorspace field. ... ok
> test_invalid_colour_specification_method (tests.test_warnings.TestSuite)
> should not error out with invalid colour specification method ... ok
> test_invalid_progression_order (tests.test_warnings.TestSuite)
> Should still be able to parse even if prog order is invalid. ... ok
> test_invalid_xml_box (tests.test_warnings.TestSuite)
> SCENARIO: An xml box has invalid XML. ... ok
> test_mismatched_bitdepth_signed (tests.test_warnings.TestSuite)
> bitdepth and signed arguments must have equal length ... ok
> test_mismatched_signed_palette (tests.test_warnings.TestSuite)
> bitdepth and signed arguments must have equal length ... ok
> test_parsing_bad_fptr_box (tests.test_warnings.TestSuite)
> SCENARIO: An ftyp box advertises too many bytes to be read. ... ok
> test_read_past_end_of_box (tests.test_warnings.TestSuite)
> SCENARIO: A pclr box has more rows specified than can fit inside the ... ok
> test_siz_ihdr_mismatch (tests.test_warnings.TestSuite)
> SCENARIO: The dimensions reported by the IHDR box don't match what is ... ok
> test_stupid_windows_eol_at_end (tests.test_warnings.TestSuite)
> SCENARIO: An otherwise valid JP2 file has invalid bytes appended to ... ok
> test_tile_height_is_zero (tests.test_warnings.TestSuite)
> Zero tile height should not cause an exception. ... ok
> test_truncated_icc_profile (tests.test_warnings.TestSuite)
> Validate a warning for a truncated ICC profile ... ok
> test_undecodeable_box_id (tests.test_warnings.TestSuite)
> SCENARIO: an unknown box ID is encountered ... ok
> test_unknown_superbox (tests.test_warnings.TestSuite)
> SCENARIO: There is a superbox with an unrecognized label. ... ok
> test_unrecognized_exif_tag (tests.test_warnings.TestSuite)
> SCENARIO: An Exif UUID box has an unrecognized tag. ... ok
> test_unrecognized_marker (tests.test_warnings.TestSuite)
> SCENARIO: There is an unrecognized marker just after an SOT marker but ... ok
> test_unrecoverable_xml (tests.test_warnings.TestSuite)
> Bad byte sequence in XML that cannot be parsed. ... ok
> test_warn_if_using_read_method (tests.test_warnings.TestSuite)
> Should warn if deprecated read method is called ... ok
> test_wrong_lengths (tests.test_warnings.TestSuite)
> Should reject if not all of index, channel_type, association the ... ok
> test_bom (tests.test_warnings.TestSuiteXML)
> Byte order markers are illegal in UTF-8. Issue 185 ... ok
>
> ======================================================================
> ERROR: test_psnr (tests.test_jp2k.TestJp2k_write)
> SCENARIO: Four peak signal-to-noise ratio values are supplied, the
> ----------------------------------------------------------------------
> Traceback (most recent call last):
> File "/<<PKGBUILDDIR>>/tests/test_jp2k.py", line 1309, in test_psnr
> psnr = [
> File "/<<PKGBUILDDIR>>/tests/test_jp2k.py", line 1310, in <listcomp>
> skimage.measure.compare_psnr(skimage.data.camera(), d[j])
> AttributeError: module 'skimage.measure' has no attribute 'compare_psnr'
>
> ----------------------------------------------------------------------
> Ran 468 tests in 44.506s
>
> FAILED (errors=1, skipped=2)
> E: pybuild pybuild:353: test: plugin custom failed with: exit code=1: env
> PYTHONPATH=/<<PKGBUILDDIR>>/.pybuild/cpython3_3.9/build python3.9 -m unittest
> discover -v
> dh_auto_test: error: pybuild --test -i python{version} -p 3.9 returned exit
> code 13
The full build log is available from:
http://qa-logs.debian.net/2020/12/26/glymur_0.9.2-1_unstable.log
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
If you reassign this bug to another package, please marking it as 'affects'-ing
this package. See https://www.debian.org/Bugs/server-control#affects
If you fail to reproduce this, please provide a build log and diff it with me
so that we can identify if something relevant changed in the meantime.
About the archive rebuild: The rebuild was done on EC2 VM instances from
Amazon Web Services, using a clean, minimal and up-to-date chroot. Every
failed build was retried once to eliminate random failures.
--- End Message ---
--- Begin Message ---
Source: glymur
Source-Version: 0.9.2-2
Done: Bas Couwenberg <sebas...@debian.org>
We believe that the bug you reported is fixed in the latest version of
glymur, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 978...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Bas Couwenberg <sebas...@debian.org> (supplier of updated glymur package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Sun, 27 Dec 2020 10:48:19 +0100
Source: glymur
Architecture: source
Version: 0.9.2-2
Distribution: unstable
Urgency: medium
Maintainer: Debian GIS Project <pkg-grass-de...@lists.alioth.debian.org>
Changed-By: Bas Couwenberg <sebas...@debian.org>
Closes: 978255
Changes:
glymur (0.9.2-2) unstable; urgency=medium
.
* Team upload.
* Bump Standards-Version to 4.5.1, no changes.
* Add patch to fix FTBFS with skimage 0.18.
(closes: #978255)
Checksums-Sha1:
0ab1dae439ed6f4c482309040bf6d6b3e008e6f2 2149 glymur_0.9.2-2.dsc
4609b02d2a1df1a10cb21231cd360cd753891e95 4380 glymur_0.9.2-2.debian.tar.xz
fc20f07bdf5e6e4616a7e01ba76c5e30ac3e7329 8930 glymur_0.9.2-2_amd64.buildinfo
Checksums-Sha256:
fa745605fe7db84f78439a343d588df3e6d8f07161871b072cb499e9be72c5fd 2149
glymur_0.9.2-2.dsc
05813cc0454cca658e6b018bca9a0b2a0e6b36b2f277fdb99c7c76e268ccff68 4380
glymur_0.9.2-2.debian.tar.xz
5b092bbb35c11da95cb8e8d697eaef751be297d1fe9e5a69df10fefe1516bf06 8930
glymur_0.9.2-2_amd64.buildinfo
Files:
831eb4dcd91a0dcc81c30e011bc45610 2149 python optional glymur_0.9.2-2.dsc
f974317f5d0237c96a1e18617460c618 4380 python optional
glymur_0.9.2-2.debian.tar.xz
cb22ee0ecdcac1cfbef21ac388e7ea12 8930 python optional
glymur_0.9.2-2_amd64.buildinfo
-----BEGIN PGP SIGNATURE-----
iQIzBAEBCgAdFiEEgYLeQXBWQI1hRlDRZ1DxCuiNSvEFAl/oXhgACgkQZ1DxCuiN
SvF5FA/8DDNXv6U2+L+mToPr6Y8qNCu4Wp5LY+yFG5yYdyZVlh70uIlPxz+ZrUcy
GSZFQMRmoTnZpP+KiEruIYBeCJzo2hRzEXqoKuZHch/jfCs9zql4WQnyaTsICLfx
wD+lCLAOi5ALR8HqBjAhQUkbIrWd0TffOiFAB5EBIjt0voICiG/37cR2rIo6SbD9
Q6zayXXqY/N4sh8yltg9I9sAADzt0kcyXNdijoUPRtkS9I1hkqAX4pi8zVfTCEPF
yD6msWsjExd4c3hSrvNELoIXmmAOa0fap17bEoeaRGFQ2kRgJulqk0BLirVLMlsq
15umzazEZ/gLGE+tGUJejWipEMeKMU1J+KmoV+LwrDW+tJqmfISpixRbXoJsxB6T
yf+xGb0J96dZLiJv9hvLJcxhZa5BGk8jg9ORaVDHv7wg5tdImIl32YaZrZvtaC+p
uslVBW3Q6MuwxhXbvpjU0WeIMkAHkrJId8Xdwd/0GOwEILq3AHxgKHFmJtHoGNoY
KNvYV/+hkpX+vPO7c32JlPDjhXl6emL2UrXP8iaXpBt51J7QYQ8vH8QFnATgOJ80
N/C9pQLaAHHpP5xf6HYSjVVQkTlXx2bKG8ySmmFgm8mij/ldN8h3zoWoZ/bLDf8h
i87vtaF6aFJlYyM5DAnohhbkPceqMlTRBWKMOAQakjufv4540tk=
=6ifK
-----END PGP SIGNATURE-----
--- End Message ---
